I have created a userform with a texbox and a "continue" button. In my macro I first ask the user to input name, date, etc then I have a line that says "frmDiscrepancies.Show". This code shows the userform but I am unable to type anything into the textbox. How do I activate the textbox so that I can type in it? Of course the next step is to be able to click on the command button "continue" and have it continue with the macro...
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click() unloadme End Sub Private Sub CommandButtonOK_Click() With Workbooks("RETS results version 2.xlsm")
Dim lCount As Long Dim rFoundCell As Range Dim sfind As String Dim cl As Range Set rFoundCell = Range("A1") For lCount = 1 To WorksheetFunction. CountIf(Columns(1), TextBox1.Value) Set rFoundCell = Columns(1). Find(What:=TextBox1.Value, After:=rFoundCell, _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False) With rFoundCell End With Next lCount.........................
this macro looks up in column A (a list of names) the name entered in textbox1 (of userform2). if found - the value is "copied" to E13. (if not - showes message - " does not exist") for example: it found the value "Dainna" (which was typied in textbox1) and copied it to E13. i want the macro to keep on to the next cell (in the row where Dainna's in- B3) and copy the age to F14.
I've created a userform that will pop up automatically when opening my workbook. My workbook will have many worksheets identified by the employee's last name, then first name (i.e. Doe, John) Etc. I ideally would like the name entry in my user form to locate the correct worksheet based on the sheet name and then all of the other data in the user form be put in the next available/appropriate row and column, etc. of that particular sheet. This user form would save me a ton of time keeping my training logs up to date, instead of having to locate each employee tab manually and then enter the data and then look for the next tab, etc.
At the end of the year I'll manually go to each worksheet and balance that year's training time and cost (as you'll see from the attached example), but I'm hoping that the user form entry will identify that "yearly balance row" as having data and would skip to the next row to begin the next year's training entry. The "Enter Data" Button would place all of the user form data (other than the name) into the appropriate row/column and I believe my refresh button will empty the user form fields, but I'm hoping it won't delete the data that was just previously entered into the worksheet. (See attachment)
see in atteched file User-form "frmEntry" work fine to update the data in Trader worksheet. but i need help to program.for the "frmExit" which i program. u can look in to the database "Trader Worksheet" .it enter the data in next available row.instead of up dating the corresponding existing stock ticker.to sell the stock.also when i enter the second sell of stock it change the row which is already their.not in new row.
I have managed to put together a userform to input the data from a safety audit card to populate a spreadsheet so that i can generate stats etc (every ticked check box inputed a tick onto the spread sheet into the correct colum for the data, on resetting the form it went to the next line as per the userform database example available here). This was working fine as it only had 5 check boxes and although my code was probably a bit rough, it did the job. The code I was using is:...
I have the following code in a userform, assigned to a command button.
Private Sub CommandButton1_Click() Select Case TextBox2.Text Case Is = "" MsgBox "Please enter the Name of recipient." Case Else End Select
Select Case TextBox3.Text Case Is = "" MsgBox "Please enter the E-Mail Address of recipient." Case Else
I modified this code as it was starting at the bottom of the worksheet & checking for the 1st vacant row from the top. I wanted it to start at the top & look for the first vacant row down. That way, if there was a entry that was deleted, it would find that row 1st & keep the list in order. This code worked fine for the last 2 days, but, this morning, nothing is being entered on sheet2.range A2 or lower.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I just need to make a user form for entering data in one of the sheets ( Pending Confirmed Orders ), requested user form should be used to enter the orders information in columns ( each column in new entry ) and just the rows ( from 6 - 21 ) with noting that row no 16 is to link external pdf file as you will see.
I have a requirements to do a simple monitoring data entry. Composed of 1 admin and 10 users. These 10 users are assign to a different lines basically every lines have assigned user.
These 10 user will do a data entry. once they are done on the data entry the Admin will update those entered by the users based on ticket number and the users can browse those updated records.
Every users per line have assign ticketnumber that start in "L1"&YY&MM "-"001" this compsed of lines + year+month and numbers.
For the users side. Right now i have already created a workbook with userform to perform data entry by user (samplefor line1 and line2 user).
It has also a viewing form to view by the users if its already updated by the admin. i put also an events if the admin work book is open by other user they cannot access the workbook.
For admin side. I created also a userform for updating the records entered by the users to update records admin will enter ticket number to textbox.
This is the reference to find and search those records that belong to a particular ticket number and lines which will be updated by the admin.
Right now, I am doing records consolidation for both user and admin records. I have a button for both admin and userlines to perform consolidation. Once the user entered the records admin will capture those records and copy to the workbook used by admin to perform update. Then once the admin perform update the user will capture those updated by admin and copy to the workbook under the user.
Basically they have separate workbook for their entry and database.
Right now I encounter some issues which I think this will affect the integrity if records. Sample like once i perform consolidation it create duplicates records.
I have a list of account entries on sheet1 that go from 1/1/2014 to 2/05/2014. I want a userform that prompts for a cutoff date, where I will enter 1/31/2014, and it will then clear all entries AFTER the date that I enter into the userform.
I will be doing this on a monthly basis, and the number of rows will change each month.
I have a userform, UserForm1, which lives in a spreadsheet called 'Data Entry.xls' There is nothing else on the spreadsheet itself, it's just for the use of a userform.
I would like the user to populate textboxs in UserForm1 but have that update cells in a separate spreadsheet 'Training.xls' in the same directory.
I have this code at the moment to find the next empty row and to input data into it, which is working perfectly to enter data to sheet1 in Data Entry.xls:
How can i modify it so it would do the same thing, i.e find the next empty row and then populate with what the user types in the textbox but in Sheet1 of 'Training.xls'
I spent so long time to fix this problem, but it seems that I can't go on. I have a simple question. How can I get the data from the UserForm and use it in the worksheet? Everything works fine, only the UserForm makes problems. Here is the
I have created a userform with 3 text boxes. It also has three buttons - clear, Cancel and Generate record button.
User form takes entries in the three text boxes and on clicking the Generate Record button, the values of the three Text Boxes are inserted in Column A, B and C of sheet1. The columns keep on populating with new data on each submit in the row below the last record.
Now it is required to enter data only if the value entered in TextBox1 is new and has not been entered previously in column A. If textbox entry is already aviailable in column A, a message box of 'Record available' shoud be prompted and the text entry must not be allowed until the data entered in TextBox1 is not unique.
Userform I've created. It's not for inputting data, just for displaying and linking to data.
I have a textbox on a userform that I would like to display exactly what is written in cell C5 of sheet1. I don't want the user to be able to edit it, just for it to display the same as C5. Any better way of doing it than using a textbox that would be good also.
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example John Red Julie Red Bob Blue John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
I am trying to create a userform to allow user to register their new team member. In the userform, I have textbox1 (new team member) & textbox2 ( name of their leader). Once both the textbox has been filled, the user need to click on the commandbutton, which will then add the newly registered team member to the combobox1 in the Sheet1 and then create a spreadsheet(tab with the Team member name) in a separate workbook, which corresponde with the name of their leader (as filled in textbox2 in the userform.
I have created a userform for the purpose of inputting data into a database, now one of the people who uses it wants me to make it so certain cells will be in a different colour if a button is selected, I can use this code to make the textbox change colour
Me.TextBox1.ForeColor = &H8000000D
but when I have the data in the textbox transfer to a cell in excel any colour change is lost, is there any way to get around this,
My question is, instead of deleting the row, how can I use the combobox to replace that row with the updated info rather than delete and resort? I have a combobox that selects names from a sheet, column A and populates itself on Userform activate/initalize. Using the Combobox to select a name, this code below populates all the fields on the form, various text and comboboxs.
When users hits the update button, it currently finds the row and deletes it, see second code example, but this reaks havoc on various parts of the program, I have to move the combobox and add name textbox's because when it deletes the row, the combobox takes on the next rowsource and then writes that info, rather than the info selected.
Private Sub ComboBox1_Change() If bBlockEvents = True Then Exit Sub If ComboBox1.Value = "" Then Reset bBlockEvents = True ComboBox1.ListIndex = -1 bBlockEvents = False Exit Sub End If userow = ComboBox1.ListIndex + 3 usercolumn = 1 If userow = "0" Then ComboBox1.Value = "" Reset Else.......................
I am a green as green can be beginner to VBA coding. My question is, I created a text box on my user form so the user can input a 'billing code' and when they hit submit on the user form, the vba will search the spreadsheet and land on the data entered in the text box.
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”. I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
I need a few of my textboxes to not accept entries of greater than 40, Also need a message box warning to popup if this is done. I've seen some examples that are vaguely similar, but not quite what I need. I already have the following in place to limit characters:
Private Sub TextBox1_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger) Select Case KeyAscii Case Asc("0") To Asc("9") Case Asc(".") If InStr(1, Me.TextBox1.Text, ".") > 0 Then KeyAscii = 0 End If Case Else KeyAscii = 0 End Select End Sub
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
I have a user form that has a combobox, two textboxes, and a button on it. When the form is loaded, the combobox fills with data from a worksheet I created. THe worksheet has a column with the item names, and another column with the quanity of each item. The combobox is filled with the item names. SO far I have this done. My issue is that when the user selects an item from the combobox, and enters a quantity in to the first textbox, and then clicks the button, I want the quantity in the textbox to add to the quantity cell that the part number from the combobox references to. Then I want this new quantity to show in the cell and the second textbox.