I have a range of data 9cols x 600rows which I want to apply 9 conditional formatting styles to. The range has other data in subsequent columns that I don't want the formatting applied to.
The condition is quite straight-forward, but I'm damned if I can find out how to do it. Only a single cell on any given row will contain data (it's a error if there's more than one value on the row). Based on the column the data is located in, I'd like to assign a background colour to the segment of the row being analysed.
Diagramatically (where * = blank)
Data (Action)
* * * * * * X * * (Colour this row segment some colour)
* X * * * * * * * (Colour this row segment another colour)
* * * X * * * * * (Colour this row segment another colour)
* * * * * * * * * (Colour this row segment another colour)
X * * * * * * * * (Colour this row segment another colour)
X * * * * * * * X (Colour this row segment red - error)
This is as far as I've got and it's not working.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
Dim cell As Range
I wrote a macro to color the cell values in the rows based on their average value. For eg if the cell value is less than 0.2 Avg, they should be red color,if value is between 0.2 and 0.5 it should be yellow. This part is working fine
Now based on the color of the rows cells , need to write a macro for the header one. Logic is Coloum header should be in red colour, if in one or more number of rows cells are red. same with yellow ones. Could you please help me out in solving this with logic.
I have an excel sheet with over 10,000 rows. Some of the rows are colored. (Light Green). I want a macro which starts from 1st colored row, cut or copy all the rows (including the colored row) before next colored row comes and paste it in the same workbook but different tab. It would also be good if macro creates the tab itself.
I have the following code to hide rows based upon whether or not the cell in column A is black or not.
Sub hide_black()
Dim Rng As Range Dim MyCell As Range Set Rng = Range("A2:A36635") For Each MyCell In Rng If MyCell.Interior.ColorIndex = 1 Then MyCell.EntireRow.Hidden = True End If Next MyCell End Sub
I was thinking of taking this one step further and having the rows hide automatically once the cell is turned black allowing the user to bypass having to click on a macro button.
The guy at the end of the post says he got it working in the end, but no one seems to have posted the final solution - could someone tell me if the solution is actually in the thread, and if so where!
My problem is outlined by this guy - basically i want to be able to delete rows in a range that have no fill color, and so keep the ones that are colored.
how to filter rows based on the background color used in a cell? I need to make a macro that will filter/hide all rows where the cell in column B has the background color set to Yellow. Is there a way to test for that so I could get a true/false value in a column to filter by?
I currently use spreadsheets to report on backup processes.
I am trying to speed up this process and one thing that woudl help me is a function that will automatically fill the row with a colour depending on the choice in the dropdown box, so if you choose 'successful' from the dropdown list the row colour would fill to green and if you select 'failed', the row would change to red and a choice of 'completed/errors' would result in orange.
This process is currently done manually and often results in errors like a succesful result with a red filling.
Is there anyway to automate this process? i was trying to whip up a macro, but have been unsuccessful so far.
Is there a way to color fill an entire row based on a value in a certain column? Say I have a large file and one column is "yes" or "no" If I wanted all of the "yes" rows to be colored -
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
I would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3 If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3 If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
This is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
I have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
I have a spreadsheet that i download from the net daily, which is seperated into columns of information.
I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.
For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.
If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.
I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.
I would like to have cells that conditionally format the font color in the cell based on the background color of the cell. Essentially I have a matrix with some cells highlighted in red, yellow, or orange. There are values in each cell of the matrix. If a value is 0 I want the font to be grey. If the value is NOT 0 AND the cell backgorund color is NOT white, I would like it black and bold. Is there any way to do this in excel or using VB?
Summary of performance of various products against target is as follows,
Product vs Target Color Code Result
CH4OH Green 1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree If 2 Amber of the 4 products, then final result amber If 2 Red of the 4 products, final result Red
how you make the following happen in excel using VBA: I want to make all the even rows a different colour (light grey) all the way down the sheet, so row 2, 4 , 6 etc. I want to leave the odd rows normal.
Ideally I would like the vba to work out the last row and stop there. My sheet is called 'Final Rep'
I have a worksheet that contains column A7 through M7. Row 7 contains the header. Currently I have a small vba procedure that inserts a blank row whenever the data in column G7 changes. Here is the code that does this.
If the cell contains: Closed then highlight the row Light Red If the cell contains: In Progress then highlight the row Light Green If the cell contains: Pending then highlight the row Yellow If the cell contains: Assigned then highlight the row Light Blue
Put the word "Yes" in the "Red" column if any cell in that row is cell (except the header row).
This was not done via conditional formatting. These red cells are the result of many different subs, so modifying these existing subs would not work as I wouldn't know where to begin modifying each one........
I have a spreadsheet where you can choose one of two options per row.
The listbox says either CASH or CHECK. If the user selects CASH, I would like the row to stay the same color. If the user selects CHECK I would like the row to be highlighted or change color. Upon a glance, anyone who knew the system could then tell how many people paid by CHECK, and who they were.
Can I automate an excel worksheet such that if ,say, "436" is written in a certain cell it shades that row yellow, or if "437" is in that cell it shades the row blue. It would then be easy to visually tell in an excel chart which lines belonged to ,say, specific companies.
