Is there a way to color fill an entire row based on a value in a certain column? Say I have a large file and one column is "yes" or "no" If I wanted all of the "yes" rows to be colored -
View 5 Replies
I want to write a macro to fill color in row 8 of the worksheet as solid black . Also columns P,T,AP,BC ,BE and BG should be filled solid black and width should be 1 for the row and the column.
View 7 Replies View Relatedi found a link to my problem in the subject title below,
http://www.ozgrid.com/forum/showthre...t=45580&page=2
The guy at the end of the post says he got it working in the end, but no one seems to have posted the final solution - could someone tell me if the solution is actually in the thread, and if so where!
My problem is outlined by this guy - basically i want to be able to delete rows in a range that have no fill color, and so keep the ones that are colored.
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
I would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
ABCD 12345
ABD 12345
ABCD 12349
ABDF 12349
ABCD 12358
ABF 12358
fill color of autoshapes on condition depend on cell value
View 1 Replies View RelatedAfternoon everyone i am having abit of trouble working on an excel 2007 spreadsheet. In cell I1 i have a tab called Color. i want the cells below I1 to be filled with one of 3 colors green, yellow, or red depending on whats in cell F "Status" (closed or open - in progress) and cell G ECD for estimated completion date.
Green - i need it to fill green if status is closed. Yellow - need it to fill yellow if ECD is any date greater than today and if status is open. Red - need it to fill red if ECD is todays date or older and status is open.
I want by using some code I've seen on this forum or using the macro writer and then tweaking the code. So with that said, I've written the attached code but I know there is probably an easier way to write it. It cycles through about 12 sheets using the same below code, but I didn't list that code.
Sub Hide_Rows()
Dim i As Integer
For i = 3 To 418
Sheets("AFA - UMBI").Select
If ActiveSheet. Range("b" & i).Value = "2008-2" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2008-3" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2008-4" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-1" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-2" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-3" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-4" Then
Rows(i & ":" & i).EntireRow.Hidden = True
End If
Next i
End Sub
how I can alternate the background color (fill color) of rows in a spreadsheet. Say I wanted every other row to be gray starting at row 10.
View 6 Replies View RelatedI have eight sheets that have lists of questions in, which I want to copy across to a results sheet if the answer to a question is 'Yes'. Each question takes up rows B:H inclusive, and I would want to copy them to rows B:H in the results sheet. The "Yes" value will be found in column F of each row.
How can I set up a macro to copy the entire rows (without formatting) into a results sheet properly? I've tried every solution I can find but always hit a roadblock somewhere.
Ideally I would like to have a 'populate' button on the results sheet that would find every question that was answered 'yes' across the eight survey sheets and import them into results sheet.
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
How do I have the marco delete rows if the O column = a certain cell.
For instance my O column has a bunch of colors
Cell N1 list one color (red) and I want the macro to delete the rows that contain the color from N1 in column "O".
I need to be able to fill a cell in the same row based on values in two other cells in different columns.
Current Layout. Call these columns A, B, and C
I have 3 different states I work with, OH, IL and PA. There are different tax exemptions based on whether or not the class is RES or COM.
Conditions:
State = PA, Class = RES, Tax Exempt = 1
State = PA, Class = COM, Tax Exempt = Null (not "0")
For all other states, Tax Exempt will always = 1
I need the VBA code that will autofill column B with the proper Tax Exempt status based upon columns A and C.
The code I have now just looks at the first value in columns A and C then fills all of column B with that number.
Auto fill series based on Condition.(Excel 2003)
I know very little about macros (basically just concepts). I found this macro suggested in another thread (posted By VoG II…Thanks)
Sub test()
Dim Lastrow As Long
Lastrow = Range("A5").Value + 4
Range("B5").AutoFill Destination:=Range("B5:B" & Lastrow), Type:=xlFillSeries
End Sub
When this macro is run the first time it will fill in the numbers 2 through 15 (as I had hoped). Given 15 is the variable and 1 is the start of the range...
I am newer here and I want a macro in mentioned title. I have a number in column a2 and in column b2 quantity if in column a2 number is 2101400 and in column b2 i write quantity 50 so said number automatically fill series in column a like mentioned below...
View 9 Replies View Relatedis there any easy way to fill alternate rows of a worksheet with a particular color? I have a worksheet with 175 rows and alternate rows are to be filled with green!
View 4 Replies View RelatedA friend is trying to change an entire row's color based on a specific cell's value in that row. He cannot use conditional formatting. This is the code he's tried, to no avail:
Sub temp()
totalrows = ActiveSheet.UsedRange.Rows.Count
For Row = totalrows To 2 Step -1
If Cells(Row, 25).Value = 4 Then
Rows(Row).Select
Selection.Font.ColorIndex = 3
End If
Next Row
End Sub
I have a pivot table full of data that needs a macro/vba/something to loop through it and hide all rows that have no fill color. The table had 210 rows so I want a quick way of hiding the irrelevant ones (only the ones filled in green or red), and so all the ones with no fill need to be hidden. Something like a button to hide/unhode would be ideal.
View 4 Replies View RelatedI have a selection on a worksheet that has 4 consistent columns (A, B, C, and D) each with a variable number of rows all containing string type data. With this data I want to use Conditional Formatting so that when I have a string value of X in column D for any row, that whole row with the X in column D has it's color change to say grey, this should happen regardless of what strings are in Columns A, B, or C.
Below is the way I've been trying to do this thus far and failing, when I run this code below I can only get it to grey out the cell with the X not the whole row.
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlCellValue, Operator:=xlEqual, _
Formula1:="=""x"""
Selection.FormatConditions(1) . Interior.ColorIndex = 16
I'm using Excel 2003- and I am trying to change the fillColor of a cell based on the value of that cell.
11111122222222233333333344455555555555556666777888
If I use Conditional Formatting I can only use 3 colors, I'd like to use 8 or 9. Is there another way to do this without using the Conditional Formatting?
I'd like the result to look something like this-
11111122222222233333333344455555555555556666777888
I've looked at the similar threads in this Forum, but I couldn't find exactly what I needed.
i have some problem in display the highlight cell to another worksheet. Below is in module, i would like to display the highlighter cell to another worksheet.
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 9/2/2006 by user
'
'
Range("I351").Select
ActiveWindow.SmallScroll Down:=-12
Range("I349").Select
ActiveWindow.ScrollRow = 1
Range("E1:E400").Select
create formula/condition to colour fill different cells based on multiple Criteria.
View 3 Replies View Relatedhow to sum/count cells based on background color [url]
how to delete cells based on background color?
I wrote a macro to color the cell values in the rows based on their average value. For eg if the cell value is less than 0.2 Avg, they should be red color,if value is between 0.2 and 0.5 it should be yellow. This part is working fine
Now based on the color of the rows cells , need to write a macro for the header one. Logic is Coloum header should be in red colour, if in one or more number of rows cells are red. same with yellow ones. Could you please help me out in solving this with logic.
I want to highlight the cell of Column 'A' of excel only when it does not contain the text like "Verify", "Validate" or "Evaluate" in its content if, the value in corresponding cell of Column 'B' holds the value 'Y'. Secondly, the column 'A' can't contains the words like 'Verify', 'Validate' and 'Evaluate' if the corresponding cell in Column 'B' holds value 'N'. So just need to highlight those discrepancies if its there.
Column A
Column B
Expected Action
Press F3
N
Its Fine
Verify this..
Y
Its Fine
this....
Y
Need to Highlight Cell of Column A as Value in Column B is Y but the column A does not contain any value like "Verify", Validate" or "Evaluate"
Verify This.
N
Need to Highlight Cell of Column B as the Value of Column A contains words like "verify", "validate", "evaluate" but corresponding cell value in column B does not hold value "Y".
I'm trying to discover the best way to accomplish formatting a cell by filling it a certain color based on 2 of 3 criteria of other cells.
Column A has the title of the field. Cells B1:D1 have one of 3 values: Nothing/blank, Complete, or x. If all of the x's are gone within the range of B1:D1, I'd like to automatically format cell A1 to fill in Blue (or any color).
A1__________________B1_________________C1_____________D1
Generic Name______Complete_______________x_____________
If the 'x' in C1 is changed to the value of 'Complete', I'd like A1/Generic Name to be filled in with a color.
I have a simple spreadsheet. A column for a persons name and 31 columns, one for each day of the month. I want to apply conditional formatting, either fill color or border color, to the date column of the current date when the spreadsheet is opened.
View 2 Replies View Relatedhow I can change the color of an autoshape based on a value in a cell?
View 4 Replies View RelatedI have a detailed note inside biweekly.xls, it explains everything in context.
Two excel sheets, one is updated manually (Vikki's Yearly Averages.xls), while the other is for reporting (biweekly.xls)
The coding will all be in biweekly.xls.
First, it needs to take a date to the right of a name from biweekly.xls and use the month and year from that date for the search.
Then it needs to look in VYK.xls under the name and copy every entry starting in the year specified and month specified and ending at the current date.
I have a worksheet that when a row changes based on the value of column B, I want to remove all of the formulas found in the row but keep the existing values, and then change the color of the row.
In the sample file attached, when the value is "Closed", that row will keep the existing values and then it gets grayed out. Rows that are still marked "Open" need to retain the formulas in case other information changes.
I have tried copy/paste special using autofiltering but that doesn't work because of the hidden lines. This file changes on a daily basis and I need a quick way to update the file.
SampleFile.xlsx
