Color Rows Based On Cells Being Greater Than/Less Than X
Jun 4, 2008I have a sheet contains information about employees absence:
- Staff number
- Staff name
- Date of Leave
- Date of Return
- Number of Days Lost
ADVERTISEMENT
Color Cells In Column Greater Than Corresponding Cell
Dec 8, 2006I have a list of numbers in two columns. All I want to do is that if the number in column B is larger than the number in column A I want it to be in red font. I know I need to use the Options>View - Zero Values.", "style="background: ...
View 6 Replies View RelatedMacro: Changing Color Of Coloumn Header Based On Rows Color
Jan 15, 2009I wrote a macro to color the cell values in the rows based on their average value. For eg if the cell value is less than 0.2 Avg, they should be red color,if value is between 0.2 and 0.5 it should be yellow. This part is working fine
Now based on the color of the rows cells , need to write a macro for the header one. Logic is Coloum header should be in red colour, if in one or more number of rows cells are red. same with yellow ones. Could you please help me out in solving this with logic.
Count Cells Containing Dates (greater Than 2014) Based On Filtered Cells
Jun 24, 2014I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)
I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.
Where it gets complicated is once i filter on the Zones;
I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.
I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -
=SUMPRODUCT(SUBTOTAL(3,OFFSET(IJ3:IJ999,ROW(IJ3:IJ999)-MIN(ROW(IJ1:IJ999)),,1))*(IJ3:IJ999>DATE(2014,12,31)))
Color Column Charts Based On Font Color Data Cells
Oct 27, 2009I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
Color Cells Based On Color Of Preceeding Cell
Nov 18, 2007I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
Macro To Color Cells Based On Their Font Color
Jun 18, 2008I have a spreadsheet that i download from the net daily, which is seperated into columns of information.
I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.
For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.
If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.
I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.
Cut And Paste Rows Based On Color
Dec 21, 2009I have an excel sheet with over 10,000 rows. Some of the rows are colored. (Light Green). I want a macro which starts from 1st colored row, cut or copy all the rows (including the colored row) before next colored row comes and paste it in the same workbook but different tab. It would also be good if macro creates the tab itself.
View 9 Replies View RelatedColor Rows Based On Row Citeria
Nov 29, 2006I have a range of data 9cols x 600rows which I want to apply 9 conditional formatting styles to. The range has other data in subsequent columns that I don't want the formatting applied to.
The condition is quite straight-forward, but I'm damned if I can find out how to do it. Only a single cell on any given row will contain data (it's a error if there's more than one value on the row). Based on the column the data is located in, I'd like to assign a background colour to the segment of the row being analysed.
Diagramatically (where * = blank)
Data (Action)
* * * * * * X * * (Colour this row segment some colour)
* X * * * * * * * (Colour this row segment another colour)
* * * X * * * * * (Colour this row segment another colour)
* * * * * * * * * (Colour this row segment another colour)
X * * * * * * * * (Colour this row segment another colour)
X * * * * * * * X (Colour this row segment red - error)
This is as far as I've got and it's not working.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
Dim cell As Range
Hide Rows Based On Color
Apr 4, 2008I have the following code to hide rows based upon whether or not the cell in column A is black or not.
Sub hide_black()
Dim Rng As Range
Dim MyCell As Range
Set Rng = Range("A2:A36635")
For Each MyCell In Rng
If MyCell.Interior.ColorIndex = 1 Then
MyCell.EntireRow.Hidden = True
End If
Next MyCell
End Sub
I was thinking of taking this one step further and having the rows hide automatically once the cell is turned black allowing the user to bypass having to click on a macro button.
Delete Rows Based On Fill Color
Aug 21, 2008i found a link to my problem in the subject title below,
http://www.ozgrid.com/forum/showthre...t=45580&page=2
The guy at the end of the post says he got it working in the end, but no one seems to have posted the final solution - could someone tell me if the solution is actually in the thread, and if so where!
My problem is outlined by this guy - basically i want to be able to delete rows in a range that have no fill color, and so keep the ones that are colored.
Filter Rows Based On Background Color
Oct 27, 2008how to filter rows based on the background color used in a cell? I need to make a macro that will filter/hide all rows where the cell in column B has the background color set to Yellow. Is there a way to test for that so I could get a true/false value in a column to filter by?
View 9 Replies View RelatedAutomatically Color Rows Based On Cell Value
Dec 10, 2007I currently use spreadsheets to report on backup processes.
I am trying to speed up this process and one thing that woudl help me is a function that will automatically fill the row with a colour depending on the choice in the dropdown box, so if you choose 'successful' from the dropdown list the row colour would fill to green and if you select 'failed', the row would change to red and a choice of 'completed/errors' would result in orange.
This process is currently done manually and often results in errors like a succesful result with a red filling.
Is there anyway to automate this process? i was trying to whip up a macro, but have been unsuccessful so far.
Color Cells Based On Adjacent Cells Being Empty & Add Text
Apr 2, 2008I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
Color Fill Multiple Rows Based On Condition
Mar 22, 2007Is there a way to color fill an entire row based on a value in a certain column? Say I have a large file and one column is "yes" or "no" If I wanted all of the "yes" rows to be colored -
View 5 Replies View RelatedFill Cells Color In Worbook Based On Other Cells
Jan 27, 2005how can I automatically fill cells with certain colors based on the value of the cell. (i.e. I want to search an entire workbook and fill cells with values between 80 and 99 green, 60 to 79 yellow and 0 to 59 red.)
View 9 Replies View RelatedColor Cells Based On Multiple Conditions Of Different Cells
Jan 15, 2008I’m trying to change color in cell B9 according to different conditions in Cell C9 (than on b10 according to c10 and so long until necessary - probably will be around 2000 lines). Since there are more than 3 conditions and in two cases condition depends on the color of the C Column, I can not use conditional formatting. I’ve searched and found similar forums here, but since I’m ignorant in VBA code, I couldn’t manage to make adjustments. So if you can help me with the code, I would really appreciate it!
Condition and Results required would be:
IF column C = “S” than on Column B = color cell light blue with white border
IF column C = “P” than on Column B = color cell Green with white border
IF column C = “A” than on Column B = color cell Yellow with white border
IF column C = “L” than on Column B = color cell Red with white border
IF column C = “C” than on Column B = color cell Dark Blue with white border
IF column C = “ ” than on Column B = color cell white
IF column C = “V” and has white background than on Column B = color cell white
IF column C = “V” and has a Dark Grey background than on Column B = color cell Dark Grey
I don’t know if the last two are feasible.
Delete Columns And Rows Based On Cell Fill Color
Jan 31, 2014I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
Color Cells Based On Others
Jun 25, 2007I have a long standing problem, i need to use some code that will search a range of cells , say j1 to j15, for a text "ship", gather the value from the equivalent h column cell and then use that value in futher code to colour some cells. So if the value returned is say 5, then colour the next 5 columns from column A whenever "ship" is typed.
View 9 Replies View RelatedColor Cells Based On Value Above/Below
May 29, 2008I have many cells in a column, where I would like to change the colour depending on the value in the cell above. If one cell is more than or equals 600 000 and the cell below is less than 600 000, then the lower cell should change colour to red.
This should be repeted for all cells in the column, until the last empty cell.
Sub macro()
x = 7
Do While Cells(x, 4).Value <> ""
If Cells(x, 4).Value >= 600000 _
And Cells([x + 1], 4).Value < 600000 Then _
Cells([x + 1], 4).Select _
Selection.Font.ColorIndex = 3
End If
x = x + 1
Loop
End Sub
For this code I receive the error code "Compile error: End if without block if".
Automatically Color Fill Rows Based On Changing Column Information
Jun 24, 2009I would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
ABCD 12345
ABD 12345
ABCD 12349
ABDF 12349
ABCD 12358
ABF 12358
Automatically Check Cell Has Value Greater Than Zero & Change Tab Color
Oct 14, 2009I have these two subs in my thisworkbook module.
They do not want to work together.
Is there a way to incorporate the two of them?
T
he first 1 just checks to see if a cell is greater than 0 and colors the Tab green.
The first 1 is this:
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
Dim ShArr As Variant
Dim RunMacro As Boolean
Dim sCounter As Integer
Color Cells Based On Difference Between Two Cells
Jun 3, 2008I have a 2 lists of manually entered values where the values in each row are related. They are related in the sense that if the difference between them is equal to or less than, a given amount then the cell containing one value is colored Blue. e.g.
COl A holds Value x while COl B holds value y. I need to check which value is entered in columns A and B and if a given difference or greater exists colour the cell in COl B. For example the relationship relevant to a COL A value of 21.0 is 11.0.
So, I enter the following;
A1 B1
21.0 13.0 <----------------No color Blue
I enter new values
21.0 9.5 <----------------B1 is blue.........................
Color Rows For All Cells In 1 Column Meeting Condition
Oct 26, 2007A friend is trying to change an entire row's color based on a specific cell's value in that row. He cannot use conditional formatting. This is the code he's tried, to no avail:
Sub temp()
totalrows = ActiveSheet.UsedRange.Rows.Count
For Row = totalrows To 2 Step -1
If Cells(Row, 25).Value = 4 Then
Rows(Row).Select
Selection.Font.ColorIndex = 3
End If
Next Row
End Sub
Counting Cells Based On Color
Jun 19, 2013Here's a link : [URL] .....
What I would like to do is create a column that will count the number of cells in each row whose background color is not red or yellow. The yellow background color was input manually, and the red background color was input through conditional formatting.
I have a spreadsheet full of GPS locations of different pumps on different dates. Each column represents a different pump, and each row represents a different date. The cells on this sheet contain one of two things - either a set GPS coordinates or the word "Repair" and a description of the repairs done. A few days ago I went through and checked the GPS coordinates to see which pumps were where every day during the past three years, and changed the background color of each cell containing GPS coordinates determined to be off-site to yellow. I then used conditional formatting to change the background color of each cell containing the word "Repair" to red. Now I need to go through and find out how many pumps were on location, not being repaired on each day.
Here's a link to a sample workbook. Any cell containing the word "GPS" just represents the fact that there are GPS coordinates in the cell. Their format is basically "(#####, #####)".
pump location example spreadsheet.xlsx
Returning A Row Of Cells Based On A Color
Apr 25, 2007I am having a bit of a problem writing a formula that works under the specific conditions that I need.
I have a range of 6 cells, A1:A6 which contain text
I have formatting that turns that row red based on specific conditions. The problem is that if A1:A6 is red, I then need the text in those cells to be copied to Sheet 2 B1:B6.
Copy Cells Based On Color
Mar 10, 2006i have att a workbook with 2 command buttons on sheet "quote"
one turns the selected cell red.
the other one i would to have select the red cells then copy to sheet1 then change the color back to white
Sum Cells Based On Color Index
Nov 13, 2006I am trying to use a function kindly listed by Dave, that allows for a SUM to be done on cells which have a certain color index. I have modified it very slightly, but unable to set the call to it without getting errors, perhaps someone can shed some light on what i am doing wrong. Dave's original code is
Function ColorFunction(rColor As Range, rRange As Range, Optional SUM As Boolean)
Dim rCell As Range
Dim lCol As Long
Dim vResult
lCol = rColor.Interior.ColorIndex
If SUM = True Then
For Each rCell In rRange
If rCell.Interior.ColorIndex = lCol Then
vResult = WorksheetFunction.SUM(rCell,vResult)
End If
Next rCell
Else
For Each rCell In rRange
If rCell.Interior.ColorIndex = lCol Then
vResult = 1 + vResult
End If
Next rCell
End If
ColorFunction = vResult
End Function.......
Excel 2010 :: Change Cell Color Per Greater Than / Less Than Formula?
Aug 30, 2013My formula is =IF((C2+E2)>D2,"WIN","LOSE") the new formula if I wanted the cells with "WIN" to be green, and the 'LOSE' cells to be yellow. Excel 2010
View 6 Replies View RelatedCount Cells Based On Cell Color
Apr 14, 2014I would like to count the number of orange cells, Green cells, Blue cells in the attached spreadsheet.
I have attached the sample file.. In my original file the cell colors will be a result of some conditional formatting.
Color Count test.xlsx‎
Test2.xlsx