I am trying to make a certain cell range turn red on the week that a cell has listed.
What this is being used for is to track the work of our contractors, and I currently have this set up to auto calculate the jobs that are being done and when, but I would also like to include something in there that when the contractor is set to head back to India, that day forward is listed as "red" under his name. This will allow me to see if I need to extend his work based on the number of hours he has left in his jobs. I will attach the picture of it...on the top you will see dates, and the pivot table on the bottom shows when he will need new work, but I am going to add a field that has the date he is set to leave, this is what I want the coloring of fields to go off of! ...
I've an excel sheet...where I want to color the cells on the basis of following condition:
If Cell E is non-empty then cell A, Cell B, Cell C, Cell D, Cell F, Cell G, Cell H and Cell I can not be empty. If any one of the cell is found empty then color the respective cell in red!!If collectively all the cells Cell A, Cell B, Cell C, Cell D, Cell F, Cell G, Cell H and Cell I contains a value and Cell E is empty then highlight the Cell E in red color.
I have two columns, A and B (I technically have a lot more in my sheet but to make it simple just focus on these two columns). The two columns are Company Name and then Company Color. I want to write a macro that based on what color is in Company Code (B1:B500) to highlight Company Name (Column A) based on those values in column B.
I had an report and the rows of the report needs to be colored based on another cell value. My layout looks like this:
A1B1C1D1AVG 1011121330 14151617100 18192021400
For each cell, i need to compare the value of cell with that value in AVG coloumn and if condition is met, cell should be colored. Eg : If first cell value under A1 is Less than 0.2 * AVG of first row then color of the cell A2 should be red. After coloring the entire rows, then i should check and color the header row based on the color of Rows.
I tried first one, i,e coloring the rows based on conditional formatting and then written VB code to compare the color of rows and colored the header row. But the color index used in conditional formatting and the code are mismatching and the desired output is not coming.So decided to write code for coloring the rows cell.
I had this question earlier and I dont know if it just isnt a regularly answered section so I though i would ask it here.....better yet I will just link to the other page so you can see whats up. Hopefully i will get a few more hits on it in this thread.
Here is my attachment with data in first sheet and expected output in second sheet. Have given comments in second sheet for better understanding.
Data is of a debt collection, in sheet column F "form #" denotes loan form numbers and column L "paid" denotes the amount received or not received.
In this Form # are unique and form number will repeat with different paid amount.
Entire row to be colored based on the sum value of paid column amount of respective form number.
1. non repeated single form number with negative value of paid - Orange color
2. repeated form numbers with sum of values in paid column as positive value - only entire row of form number with negative value in blue color
3. repeated form numbers with sum of values in paid column as negative value - first form number row to be colored with yellow and rest of repeated form numbers with purple color and its sum value (negative value should be made available in yellow line of the Form # group to the right of right most column data)
4. form numbers and paid column of value "0" - pink color
I tried recording and edited macro only for the logic of paid value "0" and confused with other logics and declaring variables...
I need this chart to show 3 bar colors based upon values from b5:b14 (data column). This chart is based upon the last 10 draws, so since there are 3 positions, the hit frequency expectancy would be (10 draws/3 positions = 3.33 rounded to 3). So now I would like my bar graph colors RED for any values above "3" in b5:b14 (data column), GREEN for any values equal to "3" in b5:b14 (data column) and BLUE for any values below "3" in b5:b14 (data column).
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
Cells in column B need to be colored red if they are equal to 50% of the cells in column C in the same row, or if the cell in column C in the same row is 100.
With a range of cells (a1:ao41) I want to color several cells depending on the value of that particular cell and another color when that particular and a corresponding cell have both the same value. It's some sort of sociogram The first row and column both contains names of students. Let say the students have to choose the three most populair ones to work with and the three most unpopulair ones. Positive ones get the color blue, negative ones get the color yellow. That's easy to do with conditional formatting. But now comes the tricky part. If for instance Student 3 chooses Student 7 and Student 7 chooses Student 3 the color of both cells have to be green if both positive and red if both negative. That's also do-able with conditional formatting, but it most be much easier to do with VBA. I just don't know how .
I have reviewed many a thread today looking up how to color in cells c11 through c20 without conditional formating.
if these cells have a time less than 01:00 then they turn green if these cells have a time greater than 01:00 then they turn red if the time is equal to 01:00 then they turn white.
I'm trying to work out how to have cells R11 - Rxx generate the correct date, based on the rest of the calculations.
Please note that the attached is a crude cut down version of the larger spreadsheet, for the purpose of highlighting my problem.
SO, if E7 is changed, subsequently the values in K11:Rxx will be respectively updated.
D12 and G12 are entered manually. (although I'll probably make these drop downs or date choosers at some point...)
Depending on the value in E7 and time in D12, the required break period is listed in K11: Kxx.
The time that these periods of rest are required to occur before is then calculated and listed in O11:Oxx.
I need R11:Rxx to calculated the appropriate date from these calculations, relative to the date in G12.
For example, the rest required in K11, is required on the same day, as such it need to populate with the value in G12.
However the rest required in K13:Kxx, is required by a time (O13:Oxx) on the following day - G12+1
In some case, this time variance could run over 2 or more days.
I figure it's got something to do with the value in D12 also including the date of 0/1/1900.
I'm happy to add hidden cells for formulas/results to work around it, as the end product will print as an A4 document, where many cells will be locked. Would prefer not go with any VBA unless it's my only option as I haven't done any VBA stuff as yet.
NB (the value in P5 is static only in this example)
I'm creating a project calendar in Excel and for each task I have a Start Date (A) and End Date (B) in adjacent cells. To the right are corresponding date cells like a timeline set up with 52 cells representing weeks of the year. I.e Week 1 (C) starts at 02 Jul 12, Week 2 (D) starts at 09 jul 12 etc. up to 24 Jun 14 (BF).
Start Date End date 02-Jul-12 09-Jul-12
[Code]......
When a start date and end date are entered in the respective columns, I need to have the color start on the cell for that range in the timeline and that color should carry out to the end date cell in the timeline. A bit like a Gantt chart but not to that detail.
I have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting: Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
i hav sheet containing list of employee number, think it is a labour camp, each room have four labours, each have a unique code. I made sketch in excel and enter all labour number in each cell, border them look look like a room, i have 120 rooms like that.
Now the problem :D, i hae different national labors
I have seperate list having their national according to their employee code.
Now i wanna color thier cell according to their national
I am searching a code and formula for last 45 days...
My question is that I would like to have a macro that runs on this basic file and creates a bar graph with the data. Then it utilizes the RGB values in the column to change the specific bar for that row.
DONNAS [Single cell, 1st row] 09/08/2003 15:34 [Single cell ( date and time combined) 2nd row]. Do you know of any way that I can move the name, date and time from the above cells to three separate columns on the same row?
I am currently using a piece of code (within a bigger piece) that colours the dates in two columns based on how close it is to the current date. It works fine but sometimes the sheet it is looking in has over 3500 rows so it is taking for ever (well over 6 mins)
The code is
HTML Code:
Sub ColDate() 'date case opened application.ScreenUpdating = False Dim MyRg As Range Dim F As Range Dim DateDiff As Long Set MyRg = Range("g1:h" & Range("H" & Rows.Count).End(xlUp).Row) For Each F In MyRg
Is there anyway to have columns automatically be hidden based upon a cell value? I have a column for each month, and I would only like to show months that have occured, and keep future months hidden from view. I have the current month end date in cell a1 and the following columns each have a date as the header?
I have a date in a cell that when it is less than today() (so yesterday's date) would turn red and the 5 cells to its immediate right would also turn red, if the date is still current then it would be green and so would the right hand cells.
Attached simplified sheet gives background - but need to update the cells in the aggregate monthly table C44:C55 based on data in single cell above, and according to the correct month. Need do this without the previous months data changing.
Month is determined by cell E8 and data to be updated to the agg month range is to come from cell C15. The month date will change automatically as will the data in C15.
I have one excel sheet. In the first column there are various Project Codes and in the first row there are various date. Cells in the matrix contains 0 or 1 value. If value is equals to 1 that means the project was on hold during this months and if the cell value is null of 0 (Zero) it means the project was active. For a project in a particular row there are several times a project went on hold and now I want a date range showing the project's hold duration. If project went on hold more than one time the result should also give different range for each time when project went on hold.
I would like to filter between a date range. the dates i need to filter between are in cells A1 and A2. this range contains the start and end of month. It is referenced from another sheet in the same workbook (='Job List'!C2).
i want to filter; greater than or equal to A1 and less than or equal to A2. How I can do it using the advanced filter method. My data range is C2:C9.
