I would like to filter between a date range. the dates i need to filter between are in cells A1 and A2. this range contains the start and end of month. It is referenced from another sheet in the same workbook (='Job List'!C2).
i want to filter; greater than or equal to A1 and less than or equal to A2. How I can do it using the advanced filter method. My data range is C2:C9.
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI have a date in a cell that when it is less than today() (so yesterday's date) would turn red and the 5 cells to its immediate right would also turn red, if the date is still current then it would be green and so would the right hand cells.
View 4 Replies View RelatedI have one excel sheet. In the first column there are various Project Codes and in the first row there are various date. Cells in the matrix contains 0 or 1 value. If value is equals to 1 that means the project was on hold during this months and if the cell value is null of 0 (Zero) it means the project was active. For a project in a particular row there are several times a project went on hold and now I want a date range showing the project's hold duration. If project went on hold more than one time the result should also give different range for each time when project went on hold.
follow the link to view the excel file.
http://www.excelforum.com/attachment...3&d=1336994800
[IMG]http://www.mrexcel.com/forum/data:image/png;base64,
iVBORw0KGgoAAAANSUhEUgAABAAAAAMACAIAAAA12IJaAAAgAElEQVR4nOy9e3gT153/P99fd7vd77fxV+3udtO06fr3PL
[code].....
I have a range (D5:BU5) that I will have various dates in each cell. At the end of the row is a percentage block. It has the formula count=(D5:BU5)/70 which gives me a percentage complete. The fun begins where some dates are based off annual, semi-annual, and quarterly. What I want to do is be able to delete cell values so they are not reflected in the final percentage. I know there is a marco that deletes the entire row but that is too much I just want a target cell.
View 3 Replies View RelatedI am very new to VBA. I need to have a code that will hide/unhide cells based on a date range.
Cell A1 contains the formula for todays date, based on that answer, I want to hide/unhide columns based on a weekly date range.
Ex.:
Today is 03/18/2014 I want excel to say If A1(Today) is greater than 03/14/2014 and less than or equal to 03/21/2014 then unhide column E and hide the rest.
Then let's say Today is 03/22/2014. I want excel to say If A1(Today) is greater than 03/21/2014 and less than or equal to 03/28/2014 then unhide column F and hide the rest.
columns in questions are D-AC
I am using Excel 2007.
Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.
28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell
I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.
For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.
Is it possible to be able to select a range of dates, and a time interval, and then to automatically fill in cells in a column? to be more specific, I want to be able to select, say 1 Jan 2013 to 31 dec 2013 in one box, then specify a time interval, for example "hourly" and then a column is populated with each interval, i.e. 1 jan 2013 00:00, and then the next one is 1 jan 2013 01:00 etc. I have tired the normal automatic fill tool but it never seems to get it right. It works for the first few days then it all goes funny.
View 3 Replies View RelatedI'm creating a project calendar in Excel and for each task I have a Start Date (A) and End Date (B) in adjacent cells. To the right are corresponding date cells like a timeline set up with 52 cells representing weeks of the year. I.e Week 1 (C) starts at 02 Jul 12, Week 2 (D) starts at 09 jul 12 etc. up to 24 Jun 14 (BF).
Start Date
End date
02-Jul-12
09-Jul-12
[Code]......
When a start date and end date are entered in the respective columns, I need to have the color start on the cell for that range in the timeline and that color should carry out to the end date cell in the timeline. A bit like a Gantt chart but not to that detail.
I am trying to get a row of cells to highlight a percentage based on a date range
Below is an example of what my spreadsheet will look like, very simple for managers to read and understand but I am stuck on how i can get this to display the right way.
In the example i would need the Jan column to colour for a certain percent for 21 days and continue to feb for 26 days. Im not sure if this makes sense but this is what they are asking for. Colour bars to simple show the percent of days off each month.
Name Start Date End Date Jan Feb Mar
Dale 11/01/14 26/02/14 21 days 26 days
I have attached the spreadsheet for an example : Book1.xlsx‎
I'm trying to build a report whereby i collate the first punch in and the last punch out from a set of data.
This is a sample data:
02-May-1409:00
02-May-1419:14
05-May-1409:31
05-May-1419:38
06-May-1409:31
06-May-1412:56
06-May-1413:10
06-May-1420:11
07-May-1408:36
07-May-1412:45
08-May-1408:45
08-May-1412:35
08-May-1413:23
08-May-1419:54
My result should be the following:
02-May-1409:00
02-May-1419:14
05-May-1409:31
05-May-1419:38
06-May-1409:31
***these cells should be filtered out
06-May-1420:11
07-May-1408:36
07-May-1412:45
08-May-1408:45
***these cells should be filtered out
08-May-1419:54
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
I want to be able to show only the dates whose months are selected in the drop down in cell A1. I've been able to do this with a Macro that I must run every time I change A1; however, I was wondering if there was a way to have the macro done automatically. I've been trying the Worksheet_Change options with little command. In addition to all of the If/Thens, I've also tried the If/ElseIfs as well:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$2" Then
If Target = "January" Then
ActiveSheet.Range("$A$2:$C$14").AutoFilter Field:=1, Criteria1:= _
xlFilterAllDatesInPeriodJanuary, Operator:=xlFilterDynamic
[Code] .....
I have some data in sheet1 with 10 columns and 5000 rows.
I want to filter the data with 2 criterios.
When I go to 4th column and Click custom filter, I will give one criteria and select "or" and give another criteria. SO I will get the result in sheet1, I need to copy the data and paste the same in sheet 2 with the header.
The problem is, I need to filter more than 20 times giving the criteria and copy the result and paste in sheet 2 one after the other.
So i need a macro to solve this time consuming work.
I just paste the two criteria either in a text box or some cells and run the macro. the macro has to filter the data in sheet1 based on my input.( that is criteria1 or criteria 2) and the result should be pasted in sheet2 with the headers.
Again I delete the values in my input cell, and paste the new values, and run the macro, that result should be pasted after the first result, with the header. (would be great if that is pasted leaving one row above, that is if the first result is pasted in sheet 2 till 10th Row, then the send result should be pasted in 12th row and so on..
the similar kind of question with some changes, I posted in the below link with
http://www.excelforum.com/excel-prog...in-sheet2.html
When using a Pivot Table I regularly filter on known data specific to me i.e. WBS codes.
Column ‘A’ contains the WBS Codes which can be as many a 1000, however, I only need to filter out the 10 or so I require, and currently I uncheck all the records and manually scroll through the list to check the ones I require.
In order to speed things up I recorded a macro which works fine, however, If I need to check any new codes I would have to record the macro again, as I tried to edit the Macro and all it does is to un check all the other codes I don't need.
Is it possible to create a Macro that picks up a range of data that is then used to filter on. (i.e. only the records I require)
I'm trying to add a line of code to filter some data based on a date in the range cell C3.
This is my code;
[Code] ....
It doesn't seem to work.
I have data contained in 4 columns. Column A is name, Column B is ID, Column C is Company, Column D is amount. There are duplicate names in column A and duplicate ID's in column B (ID's have correspending Company Names in Column C). I want to have a list so that this combination shows up only once, and then the amount next to it will be the sum of all.
Example:
DataABC DTom9730-003Company B100 Joe10242-001Company A200 Tom9730-003Company B300 Joe10242-001Company A400 Sam9730-003Company B100 Desired ResultTom9730-003Company B400 Joe10242-001Company A600 Sam9730-003Company B100
Is there any way to allow autofiltering and sorting even with locked cells within the range to be sorted? I've conditionally locked some cells based on user input, and at the end of my vb code I have allowsorting and allowfiltering. But I want to sort cells that are locked even after that. Does anyone know if that's even possible with VB?
View 4 Replies View RelatedI have a named range of values on Sheet2 (GPI). Sheet1 is an OLAP pivot table containing row label (GPI 14) and values (Net Rx Count) only.
Unfiltered this list is over 7,000 rows. I need VBA code to display only those rows where the GPI 14 value matches any value in the named GPI range on Sheet2.
In other words how can I display the select rows without manually selecting the items of interest AND without manually hard coding the values in the code as they will change.
Below is 1 of the many codes I tried. This appears to be the most intuitive but I get an 'invalid procedure" error at Set my PivotTable...
'Sub PivotAnalysis()
'
Dim myPivotTable As Excel.PivotTable
Dim myPivotField As Excel.PivotField
Dim myPivotItem As Excel.PivotItem
[Code]....
On a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click()
Sheets("Details").Select
Dim pt As PivotTable
Dim Employee As String
Dim SDate As String
Dim EDate As String
[Code]...
I need to filter and clean the criterion based on another column cells.
If the R column has the value 1, then it is filtered and cleaned only the cells of column J
My spreadsheet needs to stay current with the strange layout.
[Code] ....
Attached File : LayOutStranger.xlsx‎
I would like to only view (or otherwise mark) the highest value cells (in column g) for each category (column c),
View 3 Replies View RelatedIs there any way witch i can use to make the auto-filter range bigger than 1000 cells?
View 2 Replies View Relatedbased on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data.
Set 1 (hours)
Employee number, date, hours
12345, 1-2-2014, 6
12345, 1-3-2014, 8
12345, 1-10-2014, 8
Set 2 (periods)
Employee number, start date, end date
12345, 1-1-2014, 4-1-2014
12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this.
12345, 1-2-2014, 6, 1-1-2014, 4-1-2014
12345, 1-2-2014, 8, 1-1-2014, 4-1-2014
12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
I have an 'existing results table' as per my attached sample.
I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample.
I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range.
Please can someone show me the formula on my attached sample?
Please see my example in red.
I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
I just got into the world of PowerPivot, Excel 2013 and Pivot Tables and am in the process of creating a Dashboard which I will then be uploading to SharePoint 2013.
On top of page I added the new timeline filter which I've linked to my pivot charts. Now what I would like to do, is create an additional pivot chart which looks at whatever date range has been used in the timeline filter and subtract 5 years from that. So, when I select a date range of November 2013 - December 2013 in timeline filter, the additional pivot chart will show the details for November 2008 - December 2013. This is where I get stuck.
I'm using two SSAS cubes which I'm combining together in PowerPivot and then display in Pivot Tables and Pivot Charts.
I like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.
View 8 Replies View Related