Here is my attachment with data in first sheet and expected output in second sheet. Have given comments in second sheet for better understanding.
Data is of a debt collection, in sheet column F "form #" denotes loan form numbers and column L "paid" denotes the amount received or not received.
In this Form # are unique and form number will repeat with different paid amount.
Entire row to be colored based on the sum value of paid column amount of respective form number.
1. non repeated single form number with negative value of paid - Orange color
2. repeated form numbers with sum of values in paid column as positive value - only entire row of form number with negative value in blue color
3. repeated form numbers with sum of values in paid column as negative value - first form number row to be colored with yellow and rest of repeated form numbers with purple color and its sum value (negative value should be made available in yellow line of the Form # group to the right of right most column data)
4. form numbers and paid column of value "0" - pink color
I tried recording and edited macro only for the logic of paid value "0" and confused with other logics and declaring variables...
I have a large set of data regarding the activities going on in particular rooms. The data contains activity name, start time, day, duration, room and size.
I would like to select all rows that contain a cell in the activity name column which contain the words 'VideoConference'.
I have tried to Search, Select All then index the remaining data using =iferror(index(etc. However some activities occur in more than one room and all variables apart from 'Room' are the same. Thus when I have tried to index the room column I get the same room for both rows.
ps the raw data set consists of +28000 rows so I can not simply look through and copy.
I am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit Sub RemoveBH() Application.ScreenUpdating = False Dim intcount As Long For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
My data is in sheet 1 (Not yet printed). I would like to move automatically entiry rows (sometimes more then one) to sheet 2 (Printed) based on one cell's value. Here is a screenshot:
For example when I enter into Sheet 2 '264450' then row 2 would have been moved to Sheet 2.
And also with multiple rows, if I enter '264461' then row 4 and row 6 would have been moved to sheet 2 as well. I wouldn't like to enter a value more than once.
I know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
I have been trying to find a way of formatting an entire row based on the contents of cells in each column. However i come unstuck when trying to make the column dynamic. Below is an example:
Month 2010 2011 2012
[Code]....
The idea is that i say current year is 2011 and all rows where C contains an a will turn green. What i would like to achieve is that when i change current year to say 2012 the conditional formatting adjusts so that it looks at D instead of C.
I had an report and the rows of the report needs to be colored based on another cell value. My layout looks like this:
A1B1C1D1AVG 1011121330 14151617100 18192021400
For each cell, i need to compare the value of cell with that value in AVG coloumn and if condition is met, cell should be colored. Eg : If first cell value under A1 is Less than 0.2 * AVG of first row then color of the cell A2 should be red. After coloring the entire rows, then i should check and color the header row based on the color of Rows.
I tried first one, i,e coloring the rows based on conditional formatting and then written VB code to compare the color of rows and colored the header row. But the color index used in conditional formatting and the code are mismatching and the desired output is not coming.So decided to write code for coloring the rows cell.
I have two columns, A and B (I technically have a lot more in my sheet but to make it simple just focus on these two columns). The two columns are Company Name and then Company Color. I want to write a macro that based on what color is in Company Code (B1:B500) to highlight Company Name (Column A) based on those values in column B.
I am trying to make a certain cell range turn red on the week that a cell has listed.
What this is being used for is to track the work of our contractors, and I currently have this set up to auto calculate the jobs that are being done and when, but I would also like to include something in there that when the contractor is set to head back to India, that day forward is listed as "red" under his name. This will allow me to see if I need to extend his work based on the number of hours he has left in his jobs. I will attach the picture of it...on the top you will see dates, and the pivot table on the bottom shows when he will need new work, but I am going to add a field that has the date he is set to leave, this is what I want the coloring of fields to go off of! ...
I need this chart to show 3 bar colors based upon values from b5:b14 (data column). This chart is based upon the last 10 draws, so since there are 3 positions, the hit frequency expectancy would be (10 draws/3 positions = 3.33 rounded to 3). So now I would like my bar graph colors RED for any values above "3" in b5:b14 (data column), GREEN for any values equal to "3" in b5:b14 (data column) and BLUE for any values below "3" in b5:b14 (data column).
I'm going nuts trying to figure out what formula I could use to give me totals in columns Q and R of the attached file. Basically, in the Weekly Totals column, I want to populate how many Customers and Bags were handled according to each ship name (the data is in the table to the left). Any suggestions would be GREATLY appreciated, I'm taking stabs in the dark but am not coming up with anything that works.
I've an excel sheet...where I want to color the cells on the basis of following condition:
If Cell E is non-empty then cell A, Cell B, Cell C, Cell D, Cell F, Cell G, Cell H and Cell I can not be empty. If any one of the cell is found empty then color the respective cell in red!!If collectively all the cells Cell A, Cell B, Cell C, Cell D, Cell F, Cell G, Cell H and Cell I contains a value and Cell E is empty then highlight the Cell E in red color.
I need to put a macro in the toolbar which copies data from another worksheet. The trick is I have several worksheets and want the one macro to pull data from different columns based on which worksheet is active. So I need to test the name of the active worksheet in my logic.
I'm trying to count the number of rows in a dataset where column A is something, B is something, C is something, D is not something, D is not something else, and column E > 0 OR F is something but I just can't get the result I want.
My actual dataset is a staggering 294,000 rows and 46 columns so here's a simplified version:
This is a logic based macro that needs to compare values in 1 column above a specific cell and take action until the column has no more data. Here's what I'm trying to do (and I've also attached a sample of desired results):
1) I want user to input starting cell. So I need to create a button for that.
2) This is where the logic begins and I'm having difficulty. From cell defined in button, I move up one cell in that column and compare that value to the original cell.
If the value is greater than original cell then logic needs 2 outcomes:
a) move up 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to the right or 1c. b) move up 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value one cell to the right or 1c.
I have a sheet as shown in the picture below. If the cells in Column N has some values that are the result of some calculations. How ever if there are more than one of it, the entire row has to be deleted.
Eg:The value in Column N 816.323 has 3 rows below each other.Only one has to be there.There can be upto 10 values one after other in this way.
I tried to write a progrma by using loops and cehcking if ther is value in the cell,go to cell below and if there is value,delete the row in a loop of 10 times.But it didnt work
I've got spreadsheet I use to control the inventory of my user equipment; who has it, what is it, where is it, etc.
I'd like to "lock" multiple consecutive cells of each row so that they never seperate. This is because they need to be together. However, periodically, I need to move, sort, or rearrange the sheet.
Is there a way I can "idiot proof" this so that these cells never come unlocked from each other?
There is no vba involved (primarily because I don't know how), and no other scripting either.
I have a list of projects in several rows and at the column "K" is the status of the project, according to the status of the projects if the status is completed I want cut this entire rows and paste to another sheet calls Projects_Completed by using a macro
After running advanced filtering through VBA like that:
[Code] ........
Excel returns a couple of rows which fit the Criteria. How to display these rows in a textbox in the userform? (all I've managed to display in it is one cell).
I've been tasked with developing a macro that will generate schedules. For background, we're taking a QuickBooks Customer file and exporting it to be picked up by the macro. I've got that part working, but now I need to delete various rows based on certain criteria.
The spreadsheet has a field for Job Status which we use to define whether an account is under contract (2 in QuickBooks), or some other status. Basically what I need to do is delete the entire row of data where JobStatus (Column R) is anything but 2.
I came across this code that selects (and extends) cells between the active cell and the next cell with data.
Is it possible to modify this so that it selects the entire Rows ?
Code: Sub Test() If Selection.Select "" Then Range(Selection, Selection.End(xlDown)).Select Range(Selection, Selection.End(xlToRight)).Select Else Range(Selection, Selection.End(xlToRight)).Select End If End Sub
