Combine Data From Multiple Rows
Jun 19, 2007
so basically, here's an example of what I have. The spaces in between represent different cells:
Name Corporation Type Group
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 1
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 2
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 3
What I want to have is instead of having 3 rows in this instance, I want to have a macro that looks at rows and if it finds multiple rows with the exact same name, corporation, and type, it merges the rows to look like this:
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 1, Council 2, Council 3
In some instances, I have 3 rows that might match, some its 2, some its 10, it varies.
View 2 Replies
ADVERTISEMENT
Jun 8, 2013
I have a set of data with 5 columns. The first column is ID. Now I have the same ID recorded several times with different data (in the other 4 columns) against the ID. I want to concatenate the data with the same ID into the same row. The data has already been sorted by ID. If it is the first time this ID appears, record the whole 5 columns. If the ID appears again, then record only the 3rd, 4th and 5th column. When I run my code, I got error 'subscript out of range (Error 9)' . It seems that the array I use has only 5 columns. But I don't know how to modify this.
VB:
Sub Patient_Detail()
Dim n As Integer 'index of rows to record to
Dim i As Integer 'index of column to record from
[Code].....
View 7 Replies
View Related
Feb 22, 2012
I have a table with multiple rows for some employees and single rows for others. Each employee has a unique identifier.
Employee IDT1T2T3T4123Net salesmarket assetsmarginsspeed to market123Net salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time delivery180unit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
Is there a way in which I can restructure the data so that the multiple rows for any single employee are added into subsequent columns in one single row? e.g.
Employee IDT1T2T3T4T1bT2bT3bT4b123Net salesmarket assetsmarginsspeed to marketNet salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time deliveryunit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
The table has approximately 15000 rows & c. 30 columns in the original format. I can use basic excel, but I've never dipped into macros or anything very complicated...
View 1 Replies
View Related
Nov 4, 2006
I have a 8500 row sheet with 40 series of data given for each "data set". This data is situated in four columns and ten rows, so that rows 1-10 contain one data set, rows 11-20 contain another data set, etc...
Does anyone have a simple VBE script that can grab this data and format it so that my data sets are arranged as 850 rows and 40 columns instead of the native 8500 rows and 4 columns?
View 7 Replies
View Related
Jan 10, 2012
I have a list of about 4,000 contacts each with about 2 or 3 products with us. Each product creates a new contact row.
I would like to merge each row with the same contact into one row.
I have attached an example : Example test.xlsx
View 14 Replies
View Related
Mar 4, 2013
I have a list of companies and employees, if a company has more than 1 employee listed, I need to combine all instances of the employees into 1 row per company separated by a comma.
OLD FILE: Sample.xlsx
NEW FILE: Sample.xlsx
View 9 Replies
View Related
Oct 4, 2012
At a high level, I have several thousand rows of data. For the sake of simplicity, assume there are two columns: 1) Name; and 2)A comment (optional, could be blank). See below for example..
Sheet 1
Row 1: Mike │ "Great to work with"
Row 2: Mike │ "Bad manager"
Row 3: Tom │ "Great guy"
Row 4: Mike │ (blank)
Row 5: John │ "Cool"
Row 6: Mike │ "Best boss"
On a separate sheet, I want to be able to somehow use a lookup function to combine all the comments for each name in a nicely formatted package (notice how I skipped the blank space so it wouldn't take up a line.
Sheet 2
="Comments for "&[ref to cell containing "Mike" in another sheet]
- Great to work with
- Bad manager
- Best boss
View 6 Replies
View Related
Jun 4, 2014
combining multiple rows of related data into one row but have not seen one that matches my situation. My experience level with excel only includes some basics like vlookup, match and recorded macros, although I have used vba code for a macro that met my needs. I have a parts list for a PCB that has many different parts. Some of the parts are used multiple times across different reference designations("Reference" column in the file). I have shown a desired format and the original format below. Since the item number has blanks across the reference designators I haven't found a solution that would work for me.
Desired output:
Item
Quantity
[Code]....
View 9 Replies
View Related
Jul 25, 2012
I have a table (is populated in a macro already) that has two header rows (1 & 2), inputs a blank row on row 3, then starts data input on row 4. The data can potentially run to row 1000. The columns that are used are B through M. The part name is in column B and the quantity is in column C. The part name can repeat with a different quantity and be put in a different row than a previously entered value. I need to combine those x number of rows based on the match of the part name and sum the quantities then delete the remaining matches. Columns D-M are not unique.
I have attached a sample. The sample is very simple with just two matches but the matches can more than two. The matching rows are highlighted. duplicate rows.xls
View 9 Replies
View Related
May 13, 2014
I have 500 rows of data with 6 columns. Columns A,B,C,D,E are text, and column F is values.
I'm looking for a formula where I can say for any of these rows where the data in columns A through E match each other in those rows, combine them into one row of said text, with column E values totaled. I thought I could use SUMIFS for this, but I only know how to define SUMIFS with the criteria being a specific cell/text/value for which it should search on. In my example, the data in the cells can be anything, I just need rows to be "collapsed" to one row for like data.
View 2 Replies
View Related
Jan 17, 2013
combining 2 rows of data if certain conditions are met. I have attached an example of my worksheet for reference.
Example.xlsx
What I want to happen is if a number in column J is followed by an "x" then the values in columns AQ and AR should be combined with the row of the same number (e.g. if 236x is in column J2 then the values in AQ2 and AR2 should be combined with AQ3 and AR3 because 236 appears in column J3, the same process needs to be repeated for 237x with 237 etc.).
View 3 Replies
View Related
Mar 13, 2007
I am hoping to combine repeated data into single rows. The best way for me to explain is to attach a spreadsheet with an example of how the data is and how I would like it presented. The spreadsheet has comments to highlight this.
View 3 Replies
View Related
Aug 8, 2008
I need to combine data from multiple rows to single rows, for certain fields only. The database is large and can described as having an ID column, followed by columns 2 to n that do not need to be combined, followed by columns n+1 to N that do.
I've attached a sample dataset along with the desired outcome. For the purposes of illustration the sample uses n=3 and N=5 but the actual dataset has much larger dimensions.
View 9 Replies
View Related
Mar 7, 2013
My business I work for is a collection agency and from time to time our clients send us files that are beyond recognizable for our collection software to understand nonetheless import into our database.
The file was a PDF at first but I have since been able to convert to excel format.
The data isn't too scrambled just scattered throughout rows. I would like to have rows of patient data into one row.
The file after being converted was all in row A but I have since used text to columns to divide into separate rows. However now one patient information is on multiple rows and I need each patient info on one row.
The file looks like:
|A---------|B-------|C----------|
1.John-----|Doe-----|123 Main St|
2.New York-|NY------|
3.11100----|SSN----|Balance Owed|
I would like the data from multiple rows to continue on row 1 like this:
|A--------|B-----|C------------|D----------|E--|F-----|G----|H-------------|
1.John----|Doe---|123 Main St.-|New York---|NY-|11100|SSN-|Balance Owed--|
I am no programmer in the least and have very little to no experience in pivot tables.
This file has about 7000 accounts with patient info spread through 3-4 rows for each set of data.
How I could go about doing this without manually copying and pasting into additional columns on the same row. That will take hours if not days.
View 2 Replies
View Related
Jan 8, 2014
My workbook contains information about investigations. Each investigation gets a number and a line in the workbook. Many infos are stored: dates, subject, ...
A dynamic table contains all those informations, which allows me to manipulate data pretty easily.
Issue: For one of the characteristics of the investigation (let's say names), several results might have to be entered. For example, one investigation can have 3 different names, the next one only 2 and another one can have 6.
This causes a problem regarding the manipulation of the data.
Right now I have 10 columns "name 1" "name 2" .... and only those who need to be filled are filled. I can't however efficiently manipulate the data. For example, George could have been entered in "name 1" for the investigation 1 and in "name 2" for another investigation. Using a pivottable, to track George I'd have to select him in all 10 columns.
It seems to me the best choice would be to somehow index the names into a single column with each name linked to its investigation number..
With the index function I have 2 issues:
- It starts by going down the 1st column, then goes to 2nd, ... where I'd want all names of 1 row then names of 2nd row.
Solved this with this formula:
I turned my "names" columns in a ranged name "Names"
but - When fields are empty I get 0s. When I try to remove them with an if statement, it'll just give me empty cells. I'd prefer to skip the empty cells.
Also, I don't know how to 'link' them to my investigation number...
I have this (dynamic) table:
investigation number name 1 name 2 name 3
001 George Paul
002 Chris George Suzy
And I want something like this:
Investigation number Names
001 George
001 Paul
002 Chris
002 George
002 Suzy
View 14 Replies
View Related
Dec 11, 2008
Is it possible to combine datas from over 200 cells (all cells are from the same row) in one cell? I have tried CONCATENATE function and e.g. =A1&B2&... but is there shorter formula for this?
View 4 Replies
View Related
Sep 2, 2009
I have attached a spreadsheet. I have a data set with ID's in column A and data in columns to the right. If an ID has only one entry then there will only be a value in column B if an ID has 2 entries then there will be a value in Columns B and C, if they have 3.......... And so on....
In my attached file I have created a macro that filters each column and copies the values to another sheet. If an ID had 5 entries (B-F) I would want to have 5 rows for that ID. The attached example macro does what I want but the real data has over 50 columns. Is there a more efficient way of doing this?
View 4 Replies
View Related
May 23, 2014
I have data in multiple worksheets and I want it all combined in 1 excel sheet. The 1st worksheet is named as A and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. 2nd worksheet is named as B and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. and there are some more worksheets like that. The start point of data will always be same but can end till any row. Can I get a code for collating all together in one sheet,
View 9 Replies
View Related
Nov 13, 2006
I have 5 worksheets (all formatted the same) with data inputs from row 19 to 119 and columns A to BA. After row 119 I have several sums based on the data that is being entered on rows 19 to 119, I don't want this data being copied over. In most cases all rows from 19 to 119 will not be used, so I would only like to copy the rows that have data. To complicate matters, there are times when there will be blank rows within rows that have data. For example rows 19 to 25 will have data and 26 will be blank but rows 27 to 38 will have data. The blank rows are identified by column A (Job Number) being blank. This occurs because a job is dropped from the schedule and is no longer necessary.
In the end, I would like to have a button using VBA that will first clear the data in the new sheet (the sheet that is being populated with the information) and then re-populate it with updated data from the 5 worksheets.
View 8 Replies
View Related
Jan 3, 2014
I have a dataset that, due to the nature of how it is generated, separates certain orders into separate rows. Which orders these are is irrelevant, I just need a quick and easy way to make excel re-combine these rows in to one entry, and sum up the data in one particular column in the process of doing this.
The separate entries of a single order can be identified by the data in 3 columns matching - I have attached an example.
The constituent parts of the same order can be identified when the country, city, and code columns all have matching data as you read down. E.g., where
Country City Code
a 1 12345
a 1 12345
a 1 12345
Where this is the case, I want excel to automatically sum the count of shops for this order and then delete all but one of these rows, with the remaining row now containing this summed figure. Failing this, a new worksheet being generated/a new column giving me this data would be good.
View 6 Replies
View Related
Jul 1, 2013
Basically, we have 2 tablets tallying data and writing to the same .csv file. That csv file is then copied into a front page of a much larger excel worksheet where the tallied data is sorted and used for a variety of reasons. This works perfectly using index and match when only 1 tablet is being used, however, when both tablets are writing to the same csv at the same time it creates 2 lines instead of 1 line.
For example 1 tablet might look like this:
Lot 45689 4 6 8 9 1 5
2 tablets looks like this:
Lot 45689 2 3 1 8 1 4
Lot 45689 2 3 7 1 0 1
for the tallies, i would imagine a =SUMIF function might suffice, but that doesn't solve my problem of there being 2 lines with the same lot #.
I am only dealing with this issue from the excel side, and have no control over the tablet functionality or the CSV file which further limits me.
Wanted to add that the Lot #s change daily and often so with my understanding of pivot tables this rules them out as a viable option.
View 10 Replies
View Related
Mar 6, 2013
sample1.xlsx
Sample file attached. How do I combine the data in columns B-E into column A? Obviously in my sample file you'd use a simple cut/paste but my actual file has hundreds of columns and rows so cut/paste isn't an option. I need to move all the data into column A.
View 4 Replies
View Related
Aug 13, 2009
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
View 11 Replies
View Related
Dec 27, 2012
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor
[code].....
View 3 Replies
View Related
Jan 6, 2014
Context: My workbook contains information about investigations. Each investigation gets a number and a line in the workbook. Many infos are stored: dates, subject, ...
A dynamic table contains all those informations, which allows me to manipulate data pretty easily.
Issue: For one of the characteristics of the investigation (let's say names), several results might have to be entered. For example, one investigation can have 3 different names, the next one only 2 and another one can have 6.
This causes a problem regarding the manipulation of the data.
Right now I have 10 columns "name 1" "name 2" .... and only those who need to be filled are filled. I can't however efficiently manipulate the data. For example, George could have been entered in "name 1" for the investigation 1 and in "name 2" for another investigation. Using a pivottable, to track George I'd have to select him in all 10 columns.
I could maybe
- Write all names in 1 cell, separated by something and use somemorething to virtually split that
- Write each name in a row below, with the other characteristics copy-pasted (although then if I have 2 names and thus 2 rows, Excel will consider I have 2 different investigations).
- ???
View 2 Replies
View Related
Mar 17, 2014
I am trying to combine data from multiple columns into one column. The way my data is set up there shouldn't be any columns that have data in the same row. See below for my example.
[IMG][/IMG]
View 9 Replies
View Related
Sep 20, 2009
I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
View 9 Replies
View Related
Feb 22, 2014
I have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
View 4 Replies
View Related
Apr 9, 2014
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies
View Related
Jan 15, 2010
I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies
View Related
