Combine Data From Multiple Worksheets Into One
Nov 13, 2006
I have 5 worksheets (all formatted the same) with data inputs from row 19 to 119 and columns A to BA. After row 119 I have several sums based on the data that is being entered on rows 19 to 119, I don't want this data being copied over. In most cases all rows from 19 to 119 will not be used, so I would only like to copy the rows that have data. To complicate matters, there are times when there will be blank rows within rows that have data. For example rows 19 to 25 will have data and 26 will be blank but rows 27 to 38 will have data. The blank rows are identified by column A (Job Number) being blank. This occurs because a job is dropped from the schedule and is no longer necessary.
In the end, I would like to have a button using VBA that will first clear the data in the new sheet (the sheet that is being populated with the information) and then re-populate it with updated data from the 5 worksheets.
View 8 Replies
ADVERTISEMENT
May 23, 2014
I have data in multiple worksheets and I want it all combined in 1 excel sheet. The 1st worksheet is named as A and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. 2nd worksheet is named as B and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. and there are some more worksheets like that. The start point of data will always be same but can end till any row. Can I get a code for collating all together in one sheet,
View 9 Replies
View Related
Aug 13, 2009
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
View 11 Replies
View Related
Sep 20, 2009
I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
View 9 Replies
View Related
Feb 22, 2014
I have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
View 4 Replies
View Related
Mar 26, 2009
I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
View 4 Replies
View Related
Aug 14, 2006
I need to transfer a lot of data from many worksheets into one worksheet. The columns are all uniform, but the rows are not. I’d like some VBA code that would look at worksheet A(1) and copy the first entire row where column A is not blank and paste it to the first blank row in another worksheet titled “A(Combined)”. The code would then copy the second blank row in A(1) and paste it into the next blank row of “A(Combined)”. The code would continue until all rows with data in column A are transferred to “A(Combined)” and then proceed to worksheet A(2), etc. and do the same. See the attached workbook
View 3 Replies
View Related
Dec 27, 2013
Code to merge worksheets from different workbooks stored in different location.
I have a sheet called "Master" in all the workbook I want to combine.
I have a unique password for all the workbook as well.
All the workbooks are stored in different folder location.
I would like to do a paste special values when the consolidation takes place.
View 1 Replies
View Related
Sep 7, 2006
I'm trying to combine data from several worksheets (one sheet per workbook) into a single, consolidated master worksheet for reporting purposes (filters and pivot tables). We do not need to keep formulas for the master worksheet, only values and formats. Individual worksheets are used by different users to capture case data in a Human Services field. Column headings are identical, but rows contain data on individual cases. I'm trying to find a relatively easy way to combine multiple worksheets into a single master. After I establish the worksheets and technique, it will be operated by extremely basic users so I've been reluctant to use extensive macros.
Because of complex reporting needs, the exact combination of worksheets being combined for reporting may vary. For example, one time I may combine Tom, Dick and Harry, another time Tom, Dick and Bob, and yet another time Tom, Dick, Bob and Harry. Obviously, one method is to cut and paste the rows into a single worksheet. Are there more elegant solutions that could easily be handled by very basic users? Worksheets are stored in a single folder along with a separate worksheet used for validation rules (as you can guess, this would ideally be a database application but for various economic and political reasons we are using Excel). One possibility, if straightforward, is to use Access to consolidate data then export it back to Excel for analysis. I've scoured the various threads but have not found a situation mirroring mine. The number of rows for each worksheet is generally less than one hundred, but there will be a few exceeding several hundred. Total numer of rows of the resultant master worksheet will not exceed 10,000.
View 4 Replies
View Related
Jun 28, 2014
I have multiple files in a folder.
The files are named:
File1.xls
File2.xls
File3.xls
....and so on; the number of files varies. I am trying to write a macro, to combine all *.xls files in one workbook having each file as a separate worksheet.
View 2 Replies
View Related
Jul 28, 2014
I have about 30 Excel files, each with multiple tabs. Each file has a tab called "Invoice." I would like to create one workbook with all 30 Invoice tabs. As of not I am manually copying and pasting, which takes a while. There has to be an easier way, and I found this VB script to combine entire workbooks.
Is there any way I can run this and get just that Invoice tab and not all tabs on all files?
Sub GetSheets()
Path = "C:UsersdtDesktopdt kte"
Filename = Dir(Path & "*.xls")
Do While Filename <> ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
For Each Sheet In ActiveWorkbook.Sheets
Sheet.Copy After:=ThisWorkbook.Sheets(1)
Next Sheet
Workbooks(Filename).Close
Filename = Dir()
Loop
End Sub
View 3 Replies
View Related
Jan 30, 2014
I have one workbook with 6 worksheets, each sheet has a table with the same headings, different data, each sheet is named south, east,erie central south & west, how can i pull them all into one summary sheet? and have it constantly update? using the = and referencing each sheet won't work as they will grow and overlap each other?
View 9 Replies
View Related
Jun 14, 2014
I have groups of folders that I need to extract "Sheet2" from each workbook and assemble them into one workbook. Along the way I want to rename the sheets to the file name (-xls). I have assembled this code so far but it is broken
Code:
Sub CombineSheets()
Dim sPath As String
Dim sFname As String
Dim wBk As Workbook
Dim wSht As Variant
[Code]....
View 9 Replies
View Related
Feb 26, 2014
adapt the code write by TURBO at [URL]....
I'm trying to add more sheets to consolidate the data from different worksheets
What I want it to do is to consolidate each worksheet in every excel file into one workbook that will have the same worksheet structures as the child files
If every excel file has {Sheet1,Sheet2,Sheet3} structure The Master Consolidated workbook should have the same structure but with all the date copied from the child excel files.
Attache it's also an example
Test xls files2.zip
View 5 Replies
View Related
Feb 15, 2013
I wanted to see if it were possible to combine multiple worksheets into one new worksheet, but without duplicating columns with the same heading, enabling the data to fall into the correct column if it's shared in multiple worksheets, and adding columns if their unique. Furthermore, if there are a few "leading" columns, i.e. ones that are shared in every sheet and never move from where they are, to include those as the leading columns in the new sheet. I'm unable to post an attachment, but I'll try to paint a picture. This is on a much smaller scale than intended, but I want to combine Sheet 1 and Sheet 2 to form Sheet 3 (which I've manually copied to look how I would want it to look if the formula/code works properly). Columns A, B, and C are the "leading" columns I was referencing, whereas any of the following columns may or may not be shared in the various worksheets, but should still be included and combined if they're the same. There also might be a different number of columns depending on the sheet. I consider myself somewhat of an intermediate user, and I am familiar with using VBA codes for formulas should that be the proper remedy.
View 2 Replies
View Related
Mar 18, 2008
I am trying to copy raw data from two worksheets (Sheet2 = "550 Report (raw data)" & Sheet3 = "305 Report (raw data)"), that I cannot edit, over to a new worksheet (Sheet1 = "Exception Management") that I can edit. I have been successful in coding Sheet2 to come over correct, but am having problems with Sheet3 because of a few issues:
1st: Column A on both sheets contain a unique alpha-numeric identifier that can be used to identify records that can be combined. Sheet3 will sometimes contain multiple records for a single Sheet2 record.
2nd: Matching rows from Sheet3 will always be done based on Sheet2 column A (So I need to search through Sheet3 column A based on all values in Sheet2 column A).
3rd: The dataset is MUCH larger than my example files. Sheet2 normally contains 700+ rows of unique identifiers with 56 columns of data. Sheet3 is pretty much as-is, except ususally 1/10th the number of rows as Sheet2.
Here is the code I am experimenting with:
Private Sub CommandButton1_Click()
Sheets("Exception Management").Select
' Prepare Exception Management sheet for new data
Cells.Select .......
View 9 Replies
View Related
Oct 5, 2009
I would like to combine the data (in table format) on 900 different worksheets in one workbook (file) below each other, on one worksheet.
The data are in colombs B,C,D,E & F on all of the 900 different worksheets. The number of rows differs on each of the 900 different worksheets.
View 14 Replies
View Related
Feb 10, 2010
I have 2 sheets in the same workbook (sheet 1 & 2) with one matching column (A) of info and need them to combine and fill the missing data. Each sheet has identical column heading and the amount of data is not the same; sheet 1 has ~2000 rows and the other ~5000. Sheet 1 is consolidated so I would like to fill in the missing cells from sheet 2.
Ex. Sheet 1.......
Ex. Sheet 2.....
As you can see, the missing cells in sheet 1 could be filled from the data in sheet 2; also note that the above info is on different rows (and will be random for each case). I only want the columns to fill in that have a matching email, the other 3000 rows in sheet 2 do not match with sheet 1 and I don't want the rest of it to transfer over.
View 4 Replies
View Related
Jul 3, 2012
I am trying to combine data from two separate worksheets onto one so it can be sorted for printing. Using the macro recorder, and the search function on the forum, I managed to ham-fist my way through most of it - except for one issue.
How can I have Excel/VBA go to the first open cell in column A before it pastes the 2nd batch of information? I get an "object required" error with the MyRange variable.
Code:
Sub UpdateSortedTab()
Dim MyRange As Variant
' Removes Old Information
Sheets("Sorted").Select
Columns("A:E").Select
Selection.Delete Shift:=xlToLeft
' Copies Bench Stock Information
[Code] ........
View 5 Replies
View Related
May 14, 2012
I have 2 nearly identical workbooks and I need to update historical data from the old workbook into the newer one.
My current Coding Snippets that I want to use look like the following:
Code:
Sub UpdateWorkbook()
Dim ws As Worksheet
Dim r1 As String
Dim r2 As String
Dim r3 As String
Dim r4 As String
Dim r5 As String
Dim r6 As String
[code]....
Now, this code isn't working I suspect because the Copy and PasteSpecial Functions don't work the way I wish to.
View 4 Replies
View Related
Jan 8, 2014
My workbook contains information about investigations. Each investigation gets a number and a line in the workbook. Many infos are stored: dates, subject, ...
A dynamic table contains all those informations, which allows me to manipulate data pretty easily.
Issue: For one of the characteristics of the investigation (let's say names), several results might have to be entered. For example, one investigation can have 3 different names, the next one only 2 and another one can have 6.
This causes a problem regarding the manipulation of the data.
Right now I have 10 columns "name 1" "name 2" .... and only those who need to be filled are filled. I can't however efficiently manipulate the data. For example, George could have been entered in "name 1" for the investigation 1 and in "name 2" for another investigation. Using a pivottable, to track George I'd have to select him in all 10 columns.
It seems to me the best choice would be to somehow index the names into a single column with each name linked to its investigation number..
With the index function I have 2 issues:
- It starts by going down the 1st column, then goes to 2nd, ... where I'd want all names of 1 row then names of 2nd row.
Solved this with this formula:
I turned my "names" columns in a ranged name "Names"
but - When fields are empty I get 0s. When I try to remove them with an if statement, it'll just give me empty cells. I'd prefer to skip the empty cells.
Also, I don't know how to 'link' them to my investigation number...
I have this (dynamic) table:
investigation number name 1 name 2 name 3
001 George Paul
002 Chris George Suzy
And I want something like this:
Investigation number Names
001 George
001 Paul
002 Chris
002 George
002 Suzy
View 14 Replies
View Related
Dec 11, 2008
Is it possible to combine datas from over 200 cells (all cells are from the same row) in one cell? I have tried CONCATENATE function and e.g. =A1&B2&... but is there shorter formula for this?
View 4 Replies
View Related
Sep 2, 2009
I have attached a spreadsheet. I have a data set with ID's in column A and data in columns to the right. If an ID has only one entry then there will only be a value in column B if an ID has 2 entries then there will be a value in Columns B and C, if they have 3.......... And so on....
In my attached file I have created a macro that filters each column and copies the values to another sheet. If an ID had 5 entries (B-F) I would want to have 5 rows for that ID. The attached example macro does what I want but the real data has over 50 columns. Is there a more efficient way of doing this?
View 4 Replies
View Related
Jun 19, 2007
so basically, here's an example of what I have. The spaces in between represent different cells:
Name Corporation Type Group
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 1
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 2
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 3
What I want to have is instead of having 3 rows in this instance, I want to have a macro that looks at rows and if it finds multiple rows with the exact same name, corporation, and type, it merges the rows to look like this:
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 1, Council 2, Council 3
In some instances, I have 3 rows that might match, some its 2, some its 10, it varies.
View 2 Replies
View Related
Jun 8, 2013
I have a set of data with 5 columns. The first column is ID. Now I have the same ID recorded several times with different data (in the other 4 columns) against the ID. I want to concatenate the data with the same ID into the same row. The data has already been sorted by ID. If it is the first time this ID appears, record the whole 5 columns. If the ID appears again, then record only the 3rd, 4th and 5th column. When I run my code, I got error 'subscript out of range (Error 9)' . It seems that the array I use has only 5 columns. But I don't know how to modify this.
VB:
Sub Patient_Detail()
Dim n As Integer 'index of rows to record to
Dim i As Integer 'index of column to record from
[Code].....
View 7 Replies
View Related
Mar 6, 2013
sample1.xlsx
Sample file attached. How do I combine the data in columns B-E into column A? Obviously in my sample file you'd use a simple cut/paste but my actual file has hundreds of columns and rows so cut/paste isn't an option. I need to move all the data into column A.
View 4 Replies
View Related
Feb 22, 2012
I have a table with multiple rows for some employees and single rows for others. Each employee has a unique identifier.
Employee IDT1T2T3T4123Net salesmarket assetsmarginsspeed to market123Net salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time delivery180unit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
Is there a way in which I can restructure the data so that the multiple rows for any single employee are added into subsequent columns in one single row? e.g.
Employee IDT1T2T3T4T1bT2bT3bT4b123Net salesmarket assetsmarginsspeed to marketNet salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time deliveryunit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
The table has approximately 15000 rows & c. 30 columns in the original format. I can use basic excel, but I've never dipped into macros or anything very complicated...
View 1 Replies
View Related
Dec 27, 2012
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor
[code].....
View 3 Replies
View Related
Jan 6, 2014
Context: My workbook contains information about investigations. Each investigation gets a number and a line in the workbook. Many infos are stored: dates, subject, ...
A dynamic table contains all those informations, which allows me to manipulate data pretty easily.
Issue: For one of the characteristics of the investigation (let's say names), several results might have to be entered. For example, one investigation can have 3 different names, the next one only 2 and another one can have 6.
This causes a problem regarding the manipulation of the data.
Right now I have 10 columns "name 1" "name 2" .... and only those who need to be filled are filled. I can't however efficiently manipulate the data. For example, George could have been entered in "name 1" for the investigation 1 and in "name 2" for another investigation. Using a pivottable, to track George I'd have to select him in all 10 columns.
I could maybe
- Write all names in 1 cell, separated by something and use somemorething to virtually split that
- Write each name in a row below, with the other characteristics copy-pasted (although then if I have 2 names and thus 2 rows, Excel will consider I have 2 different investigations).
- ???
View 2 Replies
View Related
Mar 17, 2014
I am trying to combine data from multiple columns into one column. The way my data is set up there shouldn't be any columns that have data in the same row. See below for my example.
[IMG][/IMG]
View 9 Replies
View Related
