Combine Duplicate Data From Different Rows?
Jul 25, 2012
I have a table (is populated in a macro already) that has two header rows (1 & 2), inputs a blank row on row 3, then starts data input on row 4. The data can potentially run to row 1000. The columns that are used are B through M. The part name is in column B and the quantity is in column C. The part name can repeat with a different quantity and be put in a different row than a previously entered value. I need to combine those x number of rows based on the match of the part name and sum the quantities then delete the remaining matches. Columns D-M are not unique.
I have attached a sample. The sample is very simple with just two matches but the matches can more than two. The matching rows are highlighted. duplicate rows.xls
View 9 Replies
ADVERTISEMENT
Oct 30, 2013
I have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
View 1 Replies
View Related
May 13, 2014
I have 500 rows of data with 6 columns. Columns A,B,C,D,E are text, and column F is values.
I'm looking for a formula where I can say for any of these rows where the data in columns A through E match each other in those rows, combine them into one row of said text, with column E values totaled. I thought I could use SUMIFS for this, but I only know how to define SUMIFS with the criteria being a specific cell/text/value for which it should search on. In my example, the data in the cells can be anything, I just need rows to be "collapsed" to one row for like data.
View 2 Replies
View Related
Jan 17, 2013
combining 2 rows of data if certain conditions are met. I have attached an example of my worksheet for reference.
Example.xlsx
What I want to happen is if a number in column J is followed by an "x" then the values in columns AQ and AR should be combined with the row of the same number (e.g. if 236x is in column J2 then the values in AQ2 and AR2 should be combined with AQ3 and AR3 because 236 appears in column J3, the same process needs to be repeated for 237x with 237 etc.).
View 3 Replies
View Related
Mar 13, 2007
I am hoping to combine repeated data into single rows. The best way for me to explain is to attach a spreadsheet with an example of how the data is and how I would like it presented. The spreadsheet has comments to highlight this.
View 3 Replies
View Related
Jun 19, 2007
so basically, here's an example of what I have. The spaces in between represent different cells:
Name Corporation Type Group
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 1
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 2
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 3
What I want to have is instead of having 3 rows in this instance, I want to have a macro that looks at rows and if it finds multiple rows with the exact same name, corporation, and type, it merges the rows to look like this:
Vicki SchweitzerAon ConsultingBusiness GroupCouncil 1, Council 2, Council 3
In some instances, I have 3 rows that might match, some its 2, some its 10, it varies.
View 2 Replies
View Related
Aug 8, 2008
I need to combine data from multiple rows to single rows, for certain fields only. The database is large and can described as having an ID column, followed by columns 2 to n that do not need to be combined, followed by columns n+1 to N that do.
I've attached a sample dataset along with the desired outcome. For the purposes of illustration the sample uses n=3 and N=5 but the actual dataset has much larger dimensions.
View 9 Replies
View Related
Jun 8, 2013
I have a set of data with 5 columns. The first column is ID. Now I have the same ID recorded several times with different data (in the other 4 columns) against the ID. I want to concatenate the data with the same ID into the same row. The data has already been sorted by ID. If it is the first time this ID appears, record the whole 5 columns. If the ID appears again, then record only the 3rd, 4th and 5th column. When I run my code, I got error 'subscript out of range (Error 9)' . It seems that the array I use has only 5 columns. But I don't know how to modify this.
VB:
Sub Patient_Detail()
Dim n As Integer 'index of rows to record to
Dim i As Integer 'index of column to record from
[Code].....
View 7 Replies
View Related
Mar 7, 2013
My business I work for is a collection agency and from time to time our clients send us files that are beyond recognizable for our collection software to understand nonetheless import into our database.
The file was a PDF at first but I have since been able to convert to excel format.
The data isn't too scrambled just scattered throughout rows. I would like to have rows of patient data into one row.
The file after being converted was all in row A but I have since used text to columns to divide into separate rows. However now one patient information is on multiple rows and I need each patient info on one row.
The file looks like:
|A---------|B-------|C----------|
1.John-----|Doe-----|123 Main St|
2.New York-|NY------|
3.11100----|SSN----|Balance Owed|
I would like the data from multiple rows to continue on row 1 like this:
|A--------|B-----|C------------|D----------|E--|F-----|G----|H-------------|
1.John----|Doe---|123 Main St.-|New York---|NY-|11100|SSN-|Balance Owed--|
I am no programmer in the least and have very little to no experience in pivot tables.
This file has about 7000 accounts with patient info spread through 3-4 rows for each set of data.
How I could go about doing this without manually copying and pasting into additional columns on the same row. That will take hours if not days.
View 2 Replies
View Related
Feb 22, 2012
I have a table with multiple rows for some employees and single rows for others. Each employee has a unique identifier.
Employee IDT1T2T3T4123Net salesmarket assetsmarginsspeed to market123Net salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time delivery180unit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
Is there a way in which I can restructure the data so that the multiple rows for any single employee are added into subsequent columns in one single row? e.g.
Employee IDT1T2T3T4T1bT2bT3bT4b123Net salesmarket assetsmarginsspeed to marketNet salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time deliveryunit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
The table has approximately 15000 rows & c. 30 columns in the original format. I can use basic excel, but I've never dipped into macros or anything very complicated...
View 1 Replies
View Related
Jan 3, 2014
I have a dataset that, due to the nature of how it is generated, separates certain orders into separate rows. Which orders these are is irrelevant, I just need a quick and easy way to make excel re-combine these rows in to one entry, and sum up the data in one particular column in the process of doing this.
The separate entries of a single order can be identified by the data in 3 columns matching - I have attached an example.
The constituent parts of the same order can be identified when the country, city, and code columns all have matching data as you read down. E.g., where
Country City Code
a 1 12345
a 1 12345
a 1 12345
Where this is the case, I want excel to automatically sum the count of shops for this order and then delete all but one of these rows, with the remaining row now containing this summed figure. Failing this, a new worksheet being generated/a new column giving me this data would be good.
View 6 Replies
View Related
Jul 1, 2013
Basically, we have 2 tablets tallying data and writing to the same .csv file. That csv file is then copied into a front page of a much larger excel worksheet where the tallied data is sorted and used for a variety of reasons. This works perfectly using index and match when only 1 tablet is being used, however, when both tablets are writing to the same csv at the same time it creates 2 lines instead of 1 line.
For example 1 tablet might look like this:
Lot 45689 4 6 8 9 1 5
2 tablets looks like this:
Lot 45689 2 3 1 8 1 4
Lot 45689 2 3 7 1 0 1
for the tallies, i would imagine a =SUMIF function might suffice, but that doesn't solve my problem of there being 2 lines with the same lot #.
I am only dealing with this issue from the excel side, and have no control over the tablet functionality or the CSV file which further limits me.
Wanted to add that the Lot #s change daily and often so with my understanding of pivot tables this rules them out as a viable option.
View 10 Replies
View Related
Apr 23, 2013
excel.jpg
Basically I've made this up myself because what ill be working with has 100s if not 1000s of rows with many different product numbers that's quantities are different. What I've been able to do up to now is sort the spreadsheet by the product number so all the same rows are next to each other. My problem is however I need a speedy way of making these duplicate rows become one but add the total quantity basically everything in the left screenshot into the one on the right. What I've tried up to now is sorting them so there together and manually adding them up and putting them into one of the rows quantity, then delete the rest. takes to long. Another was to make a row underneath the rows I need into one but that takes more time than manually adding and deleting the rest.
View 9 Replies
View Related
Jan 27, 2010
I need to combine rows with that have the same column A value into one row. The duplication will be no more than 3 (ie 3 As, 2 Bs, 3 Cs, 1 D etc). I am looking for one of two options. 1) Ideally I'd like to be able to take 2 columns and turn them into up to 4 columns total. 2)Alternately, I can format the data to be in the correct columns to start, but will still need to merge the duplicate rows. The data can have any number of rows to start.
I've found something close, but it puts the new column data into ascending number order, which won't work for me because I need it to be in the specific order I input.(It also put all the data into one column, which I don't mind because I can do text to columns, but the order was the bugger.)
View 5 Replies
View Related
Aug 19, 2013
I have two sets of data and i would like to combine into one.
Problem is some may have duplicated part number.
My current method is copy & paste data from 2 different tab in to one and using data, remove duplicated to get what i needed.
View 1 Replies
View Related
Jun 5, 2013
I have attached a before and after image of what I am looking to accomplish.
In the before image, you can see that there are 3 rows of data
- a header
- a repeating model number (in column F) with accompanying data (values in columns G - J are the items of interest)
In the after image, you can see that I took the 3 rows of data and turned it into simply two rows of data
- a header
- the repeating model number
What I did however in the after image, as can be seen, is I took certain data values that appeared on the repeating row (columns G - J), and included them as PRICE, COST, BEGIN, and END values in new columns on row 2.
Is there a way to accomplish this via some functions or maybe even a VBA script?
View 3 Replies
View Related
Jul 28, 2013
with deleting duplicate entries in a spreadsheet that contains two names, a code number and a date. All rows with a duplicate number in column “B” should be deleted. Write a micro code? I have a few thousand of entries that need to be knocked out.
A sample file is attached : Example.xls
View 5 Replies
View Related
Mar 5, 2009
I require a formula that will show unique data in a specific rows or cells. Here are the data:
Raw Data
Col1
Row 1 A
Row 2 A
Row 3 B
Row 4 C
Row 5 C
The result should look like this (Note that the unique data are displayed in rows 6 to 8:
Col1
Row 6 A
Row 7 B
Row 8 C
View 5 Replies
View Related
Aug 15, 2008
I have a long (about 180 000 rows) list of part numbers, descriptions, prices and quantities. There are many duplicate part numbers. I need to go through and find the duplicates, add all their quantities into one cell and delete the remaining duplicates. I have used conditional formatting to find the duplicates easier but cannot use the remove duplicates button as it will delete the whole row and I need the quantity information in each row.
Any formula or macro I can set up to search the part number column (F) for duplicates and add the figures in the quantity column (J) and THEN delete the duplicate part number rows?
Maybe I need to put the new combined information in another sheet?
View 8 Replies
View Related
Jan 13, 2009
I have a spreadsheet that has thousands of rows of data with maybe 6 columns.
I would like to remove the duplicate rows but the problem I am facing is that I would like to use column A as the criteria.
There are some duplicates in column A but the issue is that the data in column B, C, D, etc may not be the same for each duplicate.
Easier to see in this image:
http://img127.imageshack.us/img127/6364/datajv6.jpg
So A1 is the same as A6
A1 has data in B1 and C1, no data in D1
A6 has data in B1, C1 and D1
I need to delete either row A1 or row A6, it is irrelevant which row it is but one of them has to go.
View 2 Replies
View Related
Jun 4, 2013
I have attached a before and after image of what I am looking to accomplish.
In the before image, you can see that there are 3 rows of data
- a header
- a repeating model number (in column F) with accompanying data (values in columns G - J are the items of interest)
In the after image, you can see that I took the 3 rows of data and turned it into simply two rows of data
- a header
- the repeating model number
What I did however in the after image, as can be seen, is I took the data that appeared on the repeating row (Row 3 from the Before image), and included the PRICE, COST, BEGIN, and END values in new columns on row 2.
The model number is the same of course, which is why I did it that way.
If the model numbers were different, I would have simply left it alone, as-is.
Is there a way to accomplish this via some functions or maybe even a VBA script?
By the way, if we have to dump all of this onto a new sheet, then so be it.
View 5 Replies
View Related
Feb 18, 2014
I need to merge rows with duplicate values in column A (Patient Name being the most important one), with columns B, C, & D usually having different isolated values as well. Columns E, F, G, H, & I are date columns, but the data is always going to be the number 1, meaning a patient was seen once that day (if they were seen two times that day for different reasons, information would be in an unmerged second row [same patient name listed in two separate rows], where columns B & C would be different). Column J is an autosum of columns E through I if that makes a difference. Column K is a notes column. The data that needs to be merged is always added to the bottom of the spreadsheet in order to show that a patient was seen on any given day, with columns B through K almost always being blank. Example:
Column A---------Column B---Col C----Col D--Col E--Col F--Col G--Col H--Col I--Col J---------Col K
Patient Name-----Therapist---Shared--%P----2/3----2/4----2/5-----2/6----2/7---Total Visits--Notes
Alice Alpha--------AB----------PT-------1---------------------------------------------0-------------blah
Boris Beta---------BC----------SELF----2----------------------------------------------0------------blahblah
Carl Carlisle-------CD---------PTA------3----------------------------------------------0
Carl Carlisle-------AB---------SELF-----2----------------------------------------------0
Donny Delta-------DE---------PT--------1---------------------------------------------0
Ernie Elephant-----EF---------PTA-------2---------------------------------------------0
Alice Alpha-----------------------------------------------1
Carl Carlisle--------------------------------------1--------------1---------------1
Ernie Elephant-------------------------------------------1---------------1
This is what I'm hoping it can look like:
Column A---------Column B---Col C----Col D--Col E--Col F--Col G--Col H--Col I--Col J---------Col K
Patient Name-----Therapist---Shared--%P----2/3----2/4----2/5-----2/6----2/7---Total Visits--Notes
Alice Alpha--------AB----------PT-------1---------------1-----------------------------1-------------blah
Boris Beta---------BC----------SELF----2----------------------------------------------0------------blahblah
Carl Carlisle-------CD---------PTA------3-------1--------------1---------------1------3
Carl Carlisle-------AB---------SELF-----2----------------------------------------------0
Donny Delta-------DE---------PT--------1---------------------------------------------0
Ernie Elephant-----EF---------PTA-------2--------------1---------------1-------------2
In this example Carl Carlisle is being seen for two different things, however how would it be written so the macro would know which Carl Carlisle row to merge with? I'm thinking that before running the macro I could manually enter the information into column B so it knows which Carl Carlisle row above to merge with.
Data always starts at row 14 (row 13 is frozen pane header column), and extends to a row that is different every week depending on how many people happen to be in the list.
I found something from this link that looks very similar to what I need, but with no knowledge of coding, I have no idea how it should be tweaked: Merge Duplicate Rows Keeping Data In Same Columns
I know I'm asking a lot, but the amount of time this takes to manually go through hundreds of rows of patient names every week is incredibly time consuming, and I have too many other things to stay on top of at work for this to drag me down day in and day out.
View 5 Replies
View Related
Jun 18, 2009
I need to concatenate and de-dupe. I want to find dupes, concatenate a column, and the delete the duplicate columns--all while maintaining data from other populated columns.
Here is the some example data:
#| Type | Name
1 | A | Bob
1 | B | Bob
1 | C | Bob
2 | B | Sally
2 | E | Sally
3 | A | Bill
3 | C | Bill
4 | E | Nancy
The result should look like:
# | Type | Name
1 | A, B, C | Bob
2 | B, E | Sally
3 | A, C | Bill
4 | E | Nancy
I am using Excel 2003.
View 5 Replies
View Related
Apr 7, 2014
I have a huge document that looks like this
Column A______Column B_____Column C
100/12__________B___________$
100/12______________________@
100/12______________________€
250/13______________________€
250/13______________________$
I want to keep in ColumnA all three rows of 100/12, because it has a value in Column B in one cell-which is the criteria, and remove the 250/13 because it has no value in cell B.
I was assuming that merging duplicates in column A, and than remove empty from ColumnB.
View 2 Replies
View Related
Jan 27, 2010
I'm in need of a formula, or another automated technique, to link a column of data from one worksheet to another. I have an input worksheet that I copy the raw data into that is formatted as follows:
COLUMN A
Row 1 12001
Row 2 12004
Row 3 12011
Row 4 12020
Row 5 13050
etc...
I need this import sheet to link to an output worksheet that would be updated automatically as new data is entered into the input sheet. However, I need the output sheet to copy the input values a specified # of the times and list them. For example, if the specified # was 3, it would be formatted as follows:
COLUMN A
Row 1 12001
Row 2 12001
Row 3 12001
Row 4 12004
Row 5 12004
Row 6 12004
Row 7 12011
etc...
I need the formula, or method, to be one that I don't have to continually re-enter as the data changes, as I have thousands of records to do this with. I've tried filling down, but autofill doesn't recognize an accurate trend. Is this something that I can accomplish by combining several fomulas, creating macros, or a combination of the both?
View 2 Replies
View Related
Sep 1, 2008
After sorting and filtering rows with in a set range I will have several rows that are almost duplicates. This is normal and expected due to how the workbook is used. Among these rows also will be several single rows that are not duplicates. It is important that I combine any two duplicates into one row. Example:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS101300PS9
2 NameA0XX15930777PS91200PS10
3 NameX1159XXP555FBX1545PS9
4 NameB0A1234P123PS101263PS9
5 NameB1A1234P123PS90512PS10
What I need is this end result:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS91200PS10PS101300PS9
2 NameX1159XXP555FBX1545PS9
3 NameB1A1234P123PS90512PS10PS101263PS9
Its important that the data in each column stay with in that same column. Also of course it needs to be on the same row with the same person (NameA and NameB). The Columns that would determine if its a duplicate are D and E . I would need this to be preformed via macro or some easy way so that others will not have a hard time. It will be on a protected Shared Workbook with Excel 2003. I've enclosed a Sample. How can I sort these or accomplish this and maintain the data where it needs to be?
View 5 Replies
View Related
Dec 11, 2008
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
View 5 Replies
View Related
Nov 1, 2007
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
View 9 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
View 9 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
View 9 Replies
View Related
