Comma In Each Cell To Separate Numbers
Apr 18, 2008I want to put in each cell a Punctation mark (comma), like this: ,
... when I have in each cell a number
I don't know how;
I want to put in each cell a Punctation mark (comma), like this: ,
... when I have in each cell a number
I don't know how;
For example the cell contains 1,M2,M7,M1,M8:2,M15,M9,M4,M5:3,M3,M6,M14,M11,M12:4,M10,M13 and I need to create M1, M2 , M3 ..etc columns and attach the coresponding number to each one of them. For instance M2,M7,M1,M8will get 1 and so forth and so on. I was acutally thinking using the Notepad to replace the , with a TAB space and paste them back in to my data set and create some IF statements. On the other hand running VBA scrip would make it even easier. However I would preffer to use a function (that I am not 100% familiar with) and leave the VBA scrip out of the question for the moment.
View 12 Replies View RelatedI receive a large spread sheet weekly, one or the column contains comma separated values (CSV), I need to separate those values 1 per cell. Maximum CSV is 5; I would need to get the output to 5 cells next to them, Example,
Source data
(A1) 10,11,12,13,14
Output needed
(B1) 10
(C1) 11
(D1) 12
(E1) 13
(F1) 14
(note, not all field contain 5 values, but they all contain at least one)
I wanted to separate my cell values with comma into a column
Item
DepIDs
No
IDA
1
2000
1
2000
[Code]...
the output will be below table,
Item
IDA
DepIDs
1
2000
2000
[Code]...
I have a data set that I wish to look up the data from one column and if it is greater then 0 write it in another column separated by commas. Here is an example:
The data is dates that a service was provided and how many time that day it was done and not everyone gets the service on the same days. I would like to summarize the days of the month that service was provided not number of times into 1 cell.
A B C
Row 1 November
Row 2 1 5 15
Row 3 1 0 2
Row 4 0 1 3
November is in A3
If A2 is greater then 0 I want to write A1 A2 If A2 and A3 is greater then 0 I want to write A1 A2, A3 If A2 is 0 and B2 is greater then 0, I want to write A1 B2
When the entry in a cell is of the format e.g 3,4 is there any way to find the value 3 or 4 in that cell?
Attempts like:
Cells(i, 1).Value = variable (e.g variable=3)
or
Set cell_found = Cells.Range("A1:A10").Find(variable, lookat:=xlWhole)
do not find the cell with the 3 (or 4). The above work fine when 3 or 4 are alone in the cell. Is there anyway to find these values in the cell?
I basically need to grab all the numbers going down in a row and get them into one cell in Text format with a comma between them.
A1
5293
5294
5295
5296
5299
5300
5301
5302
5303
5304
5305
B1
What I need in Text format
5293,5294,5295……
I'm a basic excel user really and cannot find a function that will allow me to complete the following:
CELL A1 includes the following sequence of numbers: 1,2,1,0,2,3
I would like to know how to put a formula/function into CELL B1 that sums up the sequence of numbers in CELL A1 (i.e 1+2+1+0+2+3)
I found code on this site after searching a long time that has worked well in a larger macro I'm writing for use in Excel 2003 usage. However, I'm stumped on how to achieve the following on the attached sample: find and remove the number in A2 from the list in E2 then count the individual numbers seperated by commas in E2 and post the results in G2 Repeat the same sequence for C2, D2 and F2
View 8 Replies View RelatedI am trying to separate the data in my spreadsheet. I will attach the spreadsheets and explain below. T
The column labeled number has entries that include commas. I need each number entered separated and put into its own row and I need the remaining data from the original row duplicated to the new rows.
Here is an example using the first entry.
Original entry
November Wiseman 1,2,11 Bluen Medical CA
How it needs to be separated
November Wiseman 1 Bluen Medical CA
November Wiseman 2 Bluen Medical CA
November Wiseman 11 Bluen Medical CA
I have an excel sheet I create with lots of inventory items distributed amongst several locations. The first column is a location field where several 1-2 digit location codes are seperated by commas. I would love to get the macro to copy each row, once for each location code, onto a new tab as a new longer list. Because the amount of data per row varies, I need the entire row to be copied to the new tab....
View 10 Replies View RelatedI have a 5K rows of data, each including a cell (AD) of multiple number values, separated by comma. I would like to create a new row for each unique number in column AD such that there remains only one unique value for every AD cell.
If possible, I would prefer an in-cell formula rather than a macro.
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
I am working with reference numbers which follow the following format:
first section:
E
G
WS
Second Section
PH
PP
HBP
PR......................................
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
Actual
Result
london#123;new york#34;
london;
new york;
delhi#145;chennai#54;
delhi;
chennai;
hyderabad#748;
hyderabad;
[code]....
removing the # and numbers from text and add new line after ; symbol. So it would save me a lot of time in preparing status.
I need a formula (a VBA script won't work, as it also has to work in a google docs version) that concatenates numbers taken from a specific range in a single row with ", " in between, but only if 2 conditions in the particular column those numbers are in are matched.
Let's say, my numbers are in Row 1, from B1 to N1.
My conditional values are in Rows 5 and 6 respectively, also from B to N.
Values in Row 5 are text strings (Names of people), Values in Row 6 are Dates.
I want the numbers from Row 1 to be concatenated, but only if a particular Name and a date from a specific month are in the same column.
Row 1: 1 2 3
Row 5: Name Name Name
Row 6: Date in Feb, Date in March, Date in March
Upon selection of a month and name in a dropdown cell menu, i want the output to look like this:
Name+March -> 2, 3
Name+February -> 1
I need to list 4 digit numbers in each section followed by commas, but whatever I do it goes to 3digits (e.g. I need "1234,5678,9123" and as soon as I hit Enter it goes to "123,456,789,123"). It wont work to format as text because I have a whole bunch of 12 digit numbers to break up into 4.
View 9 Replies View Relatedmake a macro wich it's going to sort comma delimited number in the correct order.. see attached file to get the wanted reult..
View 5 Replies View RelatedI'm looking to insert a comma between letters and numbers like seen below using Windows 7 and Excel 2013. I'd prefer to do this through a formula and not a VBA script. I know this is easy to do if you know how many characters strings are going to be and the format stays consistent.
ABCD90bj10r7
ABCD,90,bj,10,r,7
ABCD90rt8r7
ABCD,90,rt,8,r,7
iFH15jr7ri12
iFH,15,jr,7,ri,12
iFG155jr8ri11
iFG,155,jr,8,ri,11
iFG15jr8ri9
iFG,15,jr,8,ri,9
I am using excel at the moment with a card playing program. using the excel sheet they provided the details of what cards are dealt are exported to the worksheet and there is a simple table like so
Player Cards
............................................................
Player 1/ 24, 27, 16
Player2/ 1, 5
The information is fed through one number at a time as the cards are dealt for a total of three rounds sometimes it is only two rounds and are delimited by a comma all in the same column. I would like if possible to have these numbers appear in separate columns. that is
Card 1 / Cards 2 / Card 3
Player 1
Player 2
IS this possible. briefly i want this to happen so I can use the Vlookup function as the numbers that come through each stand for a card value but using Vlookup only the first number works and the following return an NA value as it is impossible as far as I know to have every possible combination represented in a table . If there is a way of tweaking Vlookup so it recognises the comma delimiter and in the vlookup column it will show all converted numbers then i'm all ears otherwise any help on how to split would be much appreciated. Quickly I did try using the text to columns function when i did this however in the new destination it showed only the first number and discontinued showing the others in the original as well. Additionally in this function the 'preview of selected data' does not show selected data but some sort of link =programme_name_card_gamecard_1 somethig like that. Sorry for the long one.
I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
View 11 Replies View RelatedI want to separate the texts and numbers in a column A1.Please find the attachment.
sampleworkbook.xlsx‎
creating a formula to separate the text from the numbers into 2 separate columns.
Examples are:
A1= Angel Romero 260.00
A2= Wieben Chiropractic Clinic 74.00
A3= R Ricardo Ramirez Dds 340.00
The 'Text to Column' function does not work because there is no fixed width and no deliminater. To add in a deliminater, like a "", is an option but there are thousands of cells to do this to.
As you can see, using LEFT, RIGHT and MID functions become tricky since the deliminater would be a "space" but there are often several "spaces" in the string of characters.
Is there a way to SEARCH or FIND the first number and let that be the deliminater?
I have cell with lot of texts, punctuations and numbers all mixed together,
example :
private-4089 AND road ESCORT,trailer-4111 & test vehicle
I need to remove all texts and keep the numbers only: 4089, 4111
then I hope I can do text to column to put each number in a cell
I have an address with numbers. Sometimes has only address number and sometimes the appartment also. I want to separate those numbers in two different columns.
Like the attachment : SAMPLE.xlsx
How do I get the numbers from column A to B:X ?
ABCDE1Alaska 111012211 171114317 1913 419 15 5Texas 610 711 813 915 10Utah 1112 1214
I have text in column F that have numbers at the begining of the text. Unfortunately not all the number are of the same lenght. what is the way I can separate them from the text.
example:
87VADTREVINO GROUP79403HEITKAMP SWIFT7O554HEITKAMP SWIFT
Suppose I have SPSS/HR/AF00093, and I want to take from right just 00093, how it is possible?
I want to do this in excel sheet...
I was able to create a macro to sort two columns in ascending order and then calculating their difference in the 3rd column via a macro, which work only when all the numbers were matching. if there's a mismatch then i had to separate them manually.
I am pretty much new to Macros and was thinking how do i make a macro which would compare the two columns and move the ones to the bottom which do not match?