I have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub
I was searching through this site and found this macro ...
View 9 Replies View RelatedI want to insert a command button and assign a macro, I have the developers toolbar available with the controls section and on all other spreadsheets i can then select insert and choose the required button, however on the particular workbook i want to use the insert button is greyed out and not available.
i already use macros in this workbook and they work fine from keyboard shortcuts but i would like to make one of them run from a command button
Is there a simple setting somewhere which i may have turned off inadvertently previously or could the problem have anything to do with the macros themselves?
Using excel 2003. Cannot insert command button on a spreadsheet we have. Almost all icons in the control toolbox are unavailable when Im on this specific spreadsheet. Any new documents I open work fine. Is there some kind of protected spreadsheet that wouldnt allow for a button, picture, textbox label to be inserted???
I didnt make the original sheet but am just editing and improving it.
I would really appreciate any advice you could give, I have attempted to attach a jpg showing the greyed out icons in my controltool box
I want to use to use Command button for Inserting column or row....
View 1 Replies View RelatedI am using excel 2010, i try to insert active x control command button insert but " cannot object insert" like this message came?
View 3 Replies View RelatedI currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
I'm using excel 2010 and I need a command button to add rows to the end of the dynamic table.
View 3 Replies View RelatedI am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
I have a monthly log that I need to keep to track expenses and customers visited. The log is segmented into 12 parts corresponding with each month.
I need to be able to add multiple lines via an input box while maintaining the formulas and formatting of the 2 rows directly above the forms command button (because both lines are filled with a different color) but not the contents?
There will be 12 command buttons in all and the new rows should be added at the bottom (directly above where the button is)
I found this and it works to some extent.
Sub FromFormsCommandBar2()
Dim Btn As Button
with ActiveSheet
Set Btn = .Buttons(application.caller)
btn.topleftcell.entirerow.insert
end with
End Sub
I have a command button that upon its click I would like to delete a specific row. I am using a vlookup which is giving me the row of the number I would like to delete. How do i go about deleting out this row?
this is also a radiobutton within the row that I would like to delete out as well. It is not named but it linked to column B within the row that I will be deleting.
I have a user form with combo boxes. The user selects items from the combo box and when they click the command button the selection is written to the spreadsheet. Each time the button is clicked it adds an item to the sheet making a list of items. I am trying to assign a number to each item when the command button is clicked so I have numbered list. Here is my code so far:
Private Sub cmdbtnAdd_Click()
Dim RowCount As String
'Writes user inputs to Active Worksheet when Add Item Button is clicked.
RowCount = Worksheets("Sheet1").Range
("A1").CurrentRegion.Rows.Count
With Worksheets("Sheet1").Range("A1")
.Offset(RowCount, 0).Value = ' This is where I have been trying to code in the numbering
.Offset(RowCount, 1).Value = Me.Combobox1
.Offset(RowCount, 2).Value = Me.ComboBox2
End With
End Sub
I have sheet1 having two formulas. Ideally I can copy and paste the formula to the entire column, However this then populates , say 3000 cells unnecessarily which slows down excel performance or increases size of the file.
I am looking for a vba ( this is used to open userform) To include copy formula from filled cell above to next empty row ( cells will be in column K & L)
So every-time userform is opened, the formula is copied to next empty row.
[Code] .....
When you click on a command button what would the vba code be to copy the data from the active excel workbook active sheet so that it ends up in the active word document?
I want the values from:
Cell A1 value in Excel to bookmark name "Text1"
Cell A2 value in Excel to bookmark name "Text2"
Cell A3 value in Excel to bookmark name "Text3"
to be copied into the active word document.
i have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
View 9 Replies View Relatedhow to put together a macro for a command button that deletes rows with certain text in a docyment - which worked fine a week or so ago - but now the macro will not work.
I made changes to the document - but made sure i also made changes to the code.
figuring out a code for a command button.
I have 2 sheets open with the following set up:
Sheet1
A2 = Name (chosen off sheet2)
A3 = Job Title (chosen off sheet2)
A4 = Department (chosen off sheet2)
Sheet2
Column A = List of names
Column B = Corresponding Job Title
Column C = Corresponding Department
I need to be able to choose a name off sheet2, click the command button and it send selected name, job title, and department to sheet1 to the respective cells.
In one spreadsheet, I want to have a command button that will hide all rows where the date column (column A) shows a date older than one week from today. When this button is clicked again, all rows will unhide again. Preferably the Command button title would change to reflect whether it is on the hide or show cycle (for example "Click to Hide all older than one week" and then "Click to Show all events") .
View 9 Replies View RelatedIn sheet1 I have different dates include different month as well.
I want to copy and paste current month data to sheet2 with command button.
delete rows of a report which contains $- or zero value but not row with Beginning Balance. Data begins from Column B to Column E. Some records may need to be deleted completely from Account Number down to Subtotal rows plus one empty row, if the Subtotal amount is $- or zero. Below is the sample data and how the finished sheet should look like. The report will comes in thousand of line. I don't have knowledge in programing but believe it can be done through VBA.
Account Number
211-00-5936-00-001-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
if Subtotal is $0, then delete the row starting from Account Number to Subtotal plus one empty row
211-00-5936-00-002-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
I have a row with about 230+ columns, a little over half of the columns have complex IF or Vlookup formulas. The goal would be to click a button on a UserForm (to create a new Client) to copy all row formulas to the next empty row.
View 5 Replies View RelatedI am trying to develop a system to allow me select different parts from multiple sheets and then add them into a bill of material on a separate sheet.
[URL] ...........
I have written some VB script the best I can and it includes a 'commandbutton' to make it easy for the user of the workbook to use.
This is how it works:
Go to 'Step 1 - Manifold 8640' tab and highlight one of the yellow cells.Once you have selected a yellow cell, you then click the 'select' button above.The value (along with other values) are copied to the 'Smart Calc' sheet.Then you go to 'Step 2 - Gland Plate' tab, select a yellow cell, click the 'Select' button.Notice how the 'Step 2 - Gland Plate' value is entered into a different group in the 'Smart Calc' sheet - this is great................BUT
The issue I am having is:
If the user goes to 'Step 1 - Manifold 8640' tab, highlights the desired yellow cell then presses the 'Select' button twice, it will add two lines of data in the relevant 'Step 1 - Manifold 8640' section....This is ok.But when the user clicks a third time, the 'Step 1' data will overflow into the 'Step 2' section of the 'Smart Calc' tab...because the script tells the data to look for the next available line to write to. This is what I am trying to avoid!
Instead, i would like a message box to popup to indicate to the user that they cannot add anymore data into into the 'Step 1' or 'Step 2' sections of the 'Smart Calc' tab until they clear the data from within the relevant section in 'Smat Calc'.
I would like to set limits on where each 'Step 1' or 'Step 2' data is written to the 'Smart Calc' sheet (so it is within its relevant section). As you can see the script basically looks for the next available cell but this isn't really good when the data 'overflows'.
Note that you are able to highlight the yellow cells in the 'Smart Calc' tab and press the delete key, it will delete the data to clear the line. That is how i designed it to work so if the user makes a mistake they are able to just delete the relevant line and enter new data.
I Need a button to insert three rows, Let say if I click on A1 and then press the button it will insert 3 rows below A1...
View 1 Replies View RelatedI have a macro that searches a column for a date and then selects the appropriate date. The next step is to then copy the row and insert a new one below the copied one and paste only the formulas and none of the data. I have tried several iterations but all of the seem to paste the data too.
View 6 Replies View RelatedIs it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedI'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
I am on office 2010
I am new to VBA programming so i might be making a obvious mistake. I am trying to create a macro that will insert rows depending on a cell value. I also need this to be executed from a command button rather then to occur immediately after the cell value is entered. So as a example
Lets say
Cell A2 has a value 20
Cell A3 has a value 3
Cell A4 has a value 5
when this data is entered and then a Command button poressed there should be
20 rows beneath cell A2
3 rows beneath cell A3
5 rows beneath cell A4
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.