i have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
View 9 RepliesI would like to use a command button to copy a row of data from one workbook to a column in another workbook. The row of data will have different values on a daily basis but will always be B2 through BE2. I would like the copied row of data pasted in the next available column to the left in the other work book.
View 3 Replies View RelatedI have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
I've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click()
With Range("Q9")
.Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27"
.Value = .Value
End With
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies View RelatedI have been looking at summing closed workbooks here and decided that due to the problems people are facing I would be better off opening the workbooks
I have a command button that makes the cells switch between 2 sets of data.
The second set of data is held in a second workbook and needs to be recalculated every time. Works fine if the workbook is open but only returns the saved values if closed.
If have added some VBA to the Command Button that opens the 2nd spreadsheet, however, is there a way to get it to open in the background rather than on top of the sheet I am working on.
My humble approach has been to write a macro and then edit it to go back to the original sheet I have been working like so:
Private Sub CommandButton1_Click()
'
' OpenABC Macro
' Macro recorded 21/04/2009 by martin.lucas
'
' Keyboard Shortcut: Ctrl+Shift+M
'
ChDir "L:CustomersABCABC Stats"
Workbooks.Open Filename:="L:CustomersABCABC StatsMasterABC.xls", _
UpdateLinks:=0
Windows("TopLine Management.xls").Activate
End Sub
Can this be done without the user knowing it has happened.
and can a check be done so that excel does not try to open it again if it is already open.
I inserted a Command Button ("Button1") in a Worksheet ("Sheet5"). I want to disable this button while the vba is running. How do I refer to this form control from vba?
View 1 Replies View RelatedNot to sure if it can be done but i would like to have a button on my spread sheet that once pushed it automaticaly saves my worksheet as a PDF in a selected company folder in my documents.
I know if you go to file and save as PDF, then save in selected folder will work, just looking for a quicker way so my staff just needs to push one button on the worksheet and it does it all. (dummy proofing the form i guess)
I need to enable and disable command buttons in my code. These command buttons are located on sheets. I assume that I can simply set the Enable property, but I am having trouble referencing the command button. I thought I could simply reference it by name but that is not working.
View 3 Replies View RelatedThe data in 4 specific cells in C:UsersOfficeDropboxWB1 needs to (upon clicking command button) be copied to the next available blank cell in 4 specefic rows in C:usersOfficeDropboxWB2.
WB1 Specific Cells List
Sheet1!A4
Sheet1!Q7
Sheet1!N22
Sheet2!E3
Data from these cells are to be copied to the rows listed below respectively.
WB2 Destination Rows (Next available blank row)
Sheet1! Row B
Sheet1! Row D
Sheet1! Row F
Sheet1! Row J
I gather from reading other posts that sending this data within the same WB is fairly easy, is it easy to do between WB's though as i must have seperate WB's?
I am trying to enable a command button on opening the Workbook, However it dosent work. I have placed the command button on the worksheet. Programatically it gets disabled on clicking it once. So i want it to be reactivated on reopening the Workbook.
View 5 Replies View RelatedI want to hide a command button when a worksheet is protected and unhide when the sheet is unprotected.
View 14 Replies View RelatedWhat command should I use if I want to activate sheet1 by clicking a coomandbutton1 on sheet2?
View 5 Replies View RelatedI am using following command to check if a command button with 'Email This Page' written on it Exists in active worksheet or not. It always gives not present.
Dim s As String
On Error Resume Next
s = Application. CommandBars(1).Controls("Email This Page").Caption
If Err.Number = 0 Then
MsgBox "It exists"
Else
MsgBox "Not here"
End If
On the attached example, i have a check-box with controls cell M4.
There is also a command button on here, which i want to be visible when the cell value of M4 is "TRUE" and not visible when the cell value is "FALSE".
I assume i need to write some code into the worksheet to do this but don't know what to do.
I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies View RelatedI am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies View RelatedI have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies View RelatedThis is what i have but its not working.
Code:
Private Sub UserForm_Initialize()
CommandButton4.Enabled = Not (Sheets("0").Range("J8") = "Off")
End Sub
I have sheet1 having two formulas. Ideally I can copy and paste the formula to the entire column, However this then populates , say 3000 cells unnecessarily which slows down excel performance or increases size of the file.
I am looking for a vba ( this is used to open userform) To include copy formula from filled cell above to next empty row ( cells will be in column K & L)
So every-time userform is opened, the formula is copied to next empty row.
[Code] .....
I'm having a problem creating a Reset All command button that will remove user entered unlocked cell values from an entire workbook save for one specific worksheet. So for example, I have five tabs labeled as "DTF", "Week 1", "Week 2", "Week 3" and "Week 4". I want one single command button (placed in the "DTF" worksheet) to remove all of the unlocked cell values from "Week 1" to "Week 4".
View 9 Replies View Relatedi have a workbook with two sheets. i have a command button on sheet 1 that inserts another worksheet from another workbook based on a cell value in sheet 1. i would like this specific command button on sheet 1 to be hidden or disabled until a value is entered into a certain cell on sheet 1 that matches a value in a named range on sheet 2.
View 7 Replies View RelatedI have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub
When you click on a command button what would the vba code be to copy the data from the active excel workbook active sheet so that it ends up in the active word document?
I want the values from:
Cell A1 value in Excel to bookmark name "Text1"
Cell A2 value in Excel to bookmark name "Text2"
Cell A3 value in Excel to bookmark name "Text3"
to be copied into the active word document.
figuring out a code for a command button.
I have 2 sheets open with the following set up:
Sheet1
A2 = Name (chosen off sheet2)
A3 = Job Title (chosen off sheet2)
A4 = Department (chosen off sheet2)
Sheet2
Column A = List of names
Column B = Corresponding Job Title
Column C = Corresponding Department
I need to be able to choose a name off sheet2, click the command button and it send selected name, job title, and department to sheet1 to the respective cells.
In sheet1 I have different dates include different month as well.
I want to copy and paste current month data to sheet2 with command button.
I am trying to develop a system to allow me select different parts from multiple sheets and then add them into a bill of material on a separate sheet.
[URL] ...........
I have written some VB script the best I can and it includes a 'commandbutton' to make it easy for the user of the workbook to use.
This is how it works:
Go to 'Step 1 - Manifold 8640' tab and highlight one of the yellow cells.Once you have selected a yellow cell, you then click the 'select' button above.The value (along with other values) are copied to the 'Smart Calc' sheet.Then you go to 'Step 2 - Gland Plate' tab, select a yellow cell, click the 'Select' button.Notice how the 'Step 2 - Gland Plate' value is entered into a different group in the 'Smart Calc' sheet - this is great................BUT
The issue I am having is:
If the user goes to 'Step 1 - Manifold 8640' tab, highlights the desired yellow cell then presses the 'Select' button twice, it will add two lines of data in the relevant 'Step 1 - Manifold 8640' section....This is ok.But when the user clicks a third time, the 'Step 1' data will overflow into the 'Step 2' section of the 'Smart Calc' tab...because the script tells the data to look for the next available line to write to. This is what I am trying to avoid!
Instead, i would like a message box to popup to indicate to the user that they cannot add anymore data into into the 'Step 1' or 'Step 2' sections of the 'Smart Calc' tab until they clear the data from within the relevant section in 'Smat Calc'.
I would like to set limits on where each 'Step 1' or 'Step 2' data is written to the 'Smart Calc' sheet (so it is within its relevant section). As you can see the script basically looks for the next available cell but this isn't really good when the data 'overflows'.
Note that you are able to highlight the yellow cells in the 'Smart Calc' tab and press the delete key, it will delete the data to clear the line. That is how i designed it to work so if the user makes a mistake they are able to just delete the relevant line and enter new data.
I have what is probably a simple request to all the VBA experts out there, and simply want to take a template sheet in a workbook and copy it across to 100 sheets numbered/named 101 -200, and add the name of each sheet as a text reference, e.g. sheet name 101 will have a cell within the worksheet that refers to sheet 101.
I have attached a simplified spreadsheet which indicates what i'm trying to achieve.
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View Related