When you click on a command button what would the vba code be to copy the data from the active excel workbook active sheet so that it ends up in the active word document?
I want the values from:
Cell A1 value in Excel to bookmark name "Text1"
Cell A2 value in Excel to bookmark name "Text2"
Cell A3 value in Excel to bookmark name "Text3"
to be copied into the active word document.
In sheet1 I have different dates include different month as well.
I want to copy and paste current month data to sheet2 with command button.
I would like to use a command button to copy a row of data from one workbook to a column in another workbook. The row of data will have different values on a daily basis but will always be B2 through BE2. I would like the copied row of data pasted in the next available column to the left in the other work book.
View 3 Replies View RelatedItem Name, Description, Price
It's written somewhere in my spreadsheet with these headings. Sometimes they're an item of one or two. So regardless of the count, the whole bunch should be transferred to Word. my word file has some headings then in the middle should be where the data be placed then the bottom part is additional comments again.
EXCEL FILE
partNumber
Description
Unit Cost
Qty
Std cost
JGC123XLT
Paper Towel Holder for use in the factory. This item is sometimes used also at home. We always give customer total satisfaction with this item. Please contact our sales rep for inquiries
$ 12.00
1
$ 12.00
Paper Towel Holder for use in the factory. This item is sometimes used also at home. We always give customer total satisfaction with this item. Please contact our sales rep for inquiries
$ 12.00
1
$ 12.00
by the way my word doc still has headings and some notes and comments at the last part. I need to put the table in the middle after the opening information. is this something we can do in excel?
Or maybe, is it possible that the table is already fix in the Word doc and the data will just be dumped in. So the table formatting can be retained.
If possible could someone please tell me why the below code is not calling the normal.doc macro "testy" and any solutions.
The code opens a new document, pastes the text from the clipboard and then fails to run the wanted macro.
I have sheet1 having two formulas. Ideally I can copy and paste the formula to the entire column, However this then populates , say 3000 cells unnecessarily which slows down excel performance or increases size of the file.
I am looking for a vba ( this is used to open userform) To include copy formula from filled cell above to next empty row ( cells will be in column K & L)
So every-time userform is opened, the formula is copied to next empty row.
[Code] .....
Currently I am going back and forth between an excel document and a word document cutting and pasting values from the excel spreadsheet into tables in word. The task is a regular occurance therefore I wish to create a Macro that can automate this procedure. Both the excel and word documents are fixed templates therefore once a Macro is created it can be applied to all future work of similar nature.
Each table in the word document contains 6 rows of values in a single column. The excel data is arranged in a table that is 6 rows by x number of columns (how ever many sets of values there are for the particular job) therefore x determines how many tables must exist in the word document. I move between the excel and word document cutting and pasting each column into each table. This is not so time consuming if x=10 however on occasion x=100+ and it does take time.
I have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub
i have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
View 9 Replies View RelatedI have a macro set up in Excel that formats and deletes rows matching a citeria. Once the macro runs I then manually copy the data across into Word. I would like to automate this.
I would like the macro to copy over any cells containing data iinto a new word document. I also have standard text that I would like to include at the beginning and end of the word document. With the excel data being placed in the centre.
I have searched the web and tried a couple of macros with no luck. All the macros state "' requires a reference to the Word Object library: ' in the VBE select Tools, References and check the Microsoft Word X.X object library"
I am unsure how to reference this - but I have checked and found that the object library ticked is Microsoft Word 11.0 Object Library.
Looking for a way to open outlook in minimized state with excel commandbutton? seems like all the code for email put the email in outbox,and will not send.
View 5 Replies View RelatedI have managed to create a command button in excel 2007 that performs a macro upon a click. But, after re-opening the workbook, I am unable to right click on the button to recall the properties window.
View 2 Replies View Relatedfiguring out a code for a command button.
I have 2 sheets open with the following set up:
Sheet1
A2 = Name (chosen off sheet2)
A3 = Job Title (chosen off sheet2)
A4 = Department (chosen off sheet2)
Sheet2
Column A = List of names
Column B = Corresponding Job Title
Column C = Corresponding Department
I need to be able to choose a name off sheet2, click the command button and it send selected name, job title, and department to sheet1 to the respective cells.
I am trying to attach a hyperlink to a command button in excel 2003. I open the control toolbox, select command button and place it on the worksheet. with the button selected and in design mode I click on the hyperlink button on the toolbar and allocate the hypelink address. Click on the button and it works fine untill I exit design mode then the button stops working.
View 8 Replies View RelatedI am building a code based on a command button in a row, which will check is a worksheet exists (message), if not create a worksheet from a template (from another worksheet specific to a on a cell value in the same row), rename the worksheet based on a cell value in the same row.
I am having some success for each task with exception to relative cell values .....
As the code will be specific to the row (one button per row) Questions:
how to i determine the location of the button that is clicked? (I assume once this is established i can use to pull values in the same sheet on certain columns....?)
I am using excel 2010, i try to insert active x control command button insert but " cannot object insert" like this message came?
View 3 Replies View RelatedWe just upgraded to Excel 2007 from Excel 2000 and have run into a challenge relating to labeling a form command button. It appears that the length of text for a command button label has been shortened to 31 characters when setting the name using VBA. No such limitation shows up when I manually create such a button.
Following is the code that used to work to create the button and label in VBA (Excel 2000):
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] .....
If I change the string I want to use for the label to 32 characters, or less, this code works (Excel 2007).
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] ....
I have to admit that this is the last item that I thought would break!
I am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
Excel 2007 I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Code:
Excel 2007: I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
I'm using excel 2010 and I need a command button to add rows to the end of the dynamic table.
View 3 Replies View RelatedI am trying to develop a system to allow me select different parts from multiple sheets and then add them into a bill of material on a separate sheet.
[URL] ...........
I have written some VB script the best I can and it includes a 'commandbutton' to make it easy for the user of the workbook to use.
This is how it works:
Go to 'Step 1 - Manifold 8640' tab and highlight one of the yellow cells.Once you have selected a yellow cell, you then click the 'select' button above.The value (along with other values) are copied to the 'Smart Calc' sheet.Then you go to 'Step 2 - Gland Plate' tab, select a yellow cell, click the 'Select' button.Notice how the 'Step 2 - Gland Plate' value is entered into a different group in the 'Smart Calc' sheet - this is great................BUT
The issue I am having is:
If the user goes to 'Step 1 - Manifold 8640' tab, highlights the desired yellow cell then presses the 'Select' button twice, it will add two lines of data in the relevant 'Step 1 - Manifold 8640' section....This is ok.But when the user clicks a third time, the 'Step 1' data will overflow into the 'Step 2' section of the 'Smart Calc' tab...because the script tells the data to look for the next available line to write to. This is what I am trying to avoid!
Instead, i would like a message box to popup to indicate to the user that they cannot add anymore data into into the 'Step 1' or 'Step 2' sections of the 'Smart Calc' tab until they clear the data from within the relevant section in 'Smat Calc'.
I would like to set limits on where each 'Step 1' or 'Step 2' data is written to the 'Smart Calc' sheet (so it is within its relevant section). As you can see the script basically looks for the next available cell but this isn't really good when the data 'overflows'.
Note that you are able to highlight the yellow cells in the 'Smart Calc' tab and press the delete key, it will delete the data to clear the line. That is how i designed it to work so if the user makes a mistake they are able to just delete the relevant line and enter new data.
How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
I have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
I am creating a userform in Excel 2007 which requires a user to pick their name from a drop down box then press Ok, what i want to do is disable the Ok button until the user field has been selected.
View 1 Replies View Relatedhow to copy data from one workbook to another workbook.
here's the process
1. Button upload is in book1 sheet 1
2. Copy data from book to book 1 sheet 2
Here's my code for starters.
[Code] ....
The data in 4 specific cells in C:UsersOfficeDropboxWB1 needs to (upon clicking command button) be copied to the next available blank cell in 4 specefic rows in C:usersOfficeDropboxWB2.
WB1 Specific Cells List
Sheet1!A4
Sheet1!Q7
Sheet1!N22
Sheet2!E3
Data from these cells are to be copied to the rows listed below respectively.
WB2 Destination Rows (Next available blank row)
Sheet1! Row B
Sheet1! Row D
Sheet1! Row F
Sheet1! Row J
I gather from reading other posts that sending this data within the same WB is fairly easy, is it easy to do between WB's though as i must have seperate WB's?
I am making a timesheet which has a UserForm with textbox and 3 command buttons namely Search, IN and OUT. The program works like this, user type his id no., then clicks on search, once id match command buttons for IN and OUT are enabled. User clicks on IN button then current time which tags as NOW() will be pasted on the worksheet. Same goes with the OUT button. I was able to make them work that way. The problem here now is, the data being entered are vulnerable for data-re entry. What I mean is, if a certain user has already a recorded IN time, if he clicks on the IN time again, the data will be overwritten. Is there a way that once the user has already a recorded IN time, the IN button will be disabled for that user since he has already a recorded IN data?
View 14 Replies View RelatedI have 9 columns with various data and true/false checkboxes. Column 9 is labelled "Delete" and also contains a true/false checkbox. If column 9 is checked (True) and then a command button is pressed the corresponding row of data is deleted.what would the command button code be.
View 1 Replies View RelatedIs it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedI have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..