I have an unknown number of rows that represent parts and 6 columns that represent part dimensions. I need to find and output matching pairs of parts that are within certain dimensional tolerance ranges.
For example:
Dimension 1 Dimension 2 to Dimension 6
Part 1
Part 2
to Part X
-I would need the code to check if Dimension 1 of Parts 1 & 2 were within a certain range and if Dimension 2 of Parts 1 & 2 were within a range etc. then (if all of them were true) output them as a pair. Otherwise, it would continue to search for paired parts. Once a pair is found, those parts can't be used again. How can I do this?
I have two numerical columns of different length. One presents the signal and another one the background. Most of the background numbers are found in the signal column but they are not exactly the same and not located in the same rows. The numerical values are the same within some tolerance that I can specify. What I am trying to do it to remove all the background values from the signal column.
I am trying to replicate a method , it reads: 'any data point that changes by more than or less than 10% from the previous value, and does not remain at the new level for more than 6 days, should be removed.'
Thats a bit vague. The process is going to involve if statements, etc. I've attached an excel spreadsheet with some solutions I've tried. Neither of which work. The aim is to get the same answers as the highlighted column. Columns B and C replicate the method answer, but do not state the process. The letters L represent values less than 25. Its the letters D I'm trying to eradicate.
I have a DDE linked cell that is constantly updating (cell A1), I want then to have a cell (cell B1) that changes only when cell A1 differs from value currently in B1 by a certain percentage, then check B1 for the same tolerance level against A1, and repeat. I can do this in a number of ways in VB, however when VB code is running causes the DDE link not to update and since the update is constant I cannot use selectionChange and Change VB Worksheet function result in the same error.
I use this formula to calculate if a move is out of tolerance =IF(ABS(B1)>=1,"Y","N") This will work on most of the stuff we load. I would like to modify it to if b1 = "Crude" then use =IF(ABS(B1)>=.5,"Y","N"), or if B1 = "Resid" then use IF(ABS(B1)>=2.0,"Y","N"). Is it possible to include the 3 tolerance bands in one formula?
I am successfully using VBA to check a cell on one sheet against a cell on another sheet.
How easy would it be to check if this is the same OR less than 2 or more than 3? I have done part of this using nested formulas but cant find anything to help me with the syntax in VBA
The code I am using is
If W1.Cells(a, 3).Value = W2.Cells(b, 3).Value Then
I have a large amount of data pertaining to many different runs in which I am given the mass to charge ratio of a compound. My goal is to identify these compounds, and to ease this process I am trying to find a formula that would “line up” near identical masses while providing a blank if no mass was found in that run. For example, if I have:
It would be important to have some sort of tolerance setting, as the readings are not always exactly the same. Also, I’d normally have about six runs of data to line up.
What I need to do is write a macro that will find duplicates in Column A, within a changeable tolerance, say 0.1 (10%).
After finding all duplicates within a tolerance in A, I need to make another "Master" worksheet with the Duplicates from A, and their counterpart in B. So if A1 and A4 where within 10% of each other, the "Master" worksheet would contain:
A1 B1 A4 B4
using the values, giving:
1020.00242-89.84 1021.494-80.41
I tried using SUMPRODUCT and some other functions but just can't seem to put my finger on this one. I'm sure it's not hard and am overlooking something.
I am trying to apply conditional formatting to multiple columns based on a percentage varience of the value in the first cell of each column. I'm sure this is not a new concept however I have been unable to find any advice when searching. I have attached an example of my problem as a picture speaks a thousand lines of code.
I'm trying to identify where a set of values 'agree' within a specified tolerance.
I have a list of scores from different sources, and wish to both average them (easy to do) but also to identify how well they 'agree' by flagging those which have a difference above a specified tolerance. The numbers are all integers, and the tolerance will be an integer.
To give an example, I might have cells with values (2,3,2,2) and these agree within a tolerance of 1. If I had cells of (2,4,2,2) these wouldn't agree. I'd like to flag (by the creation of an 'X' within a separate column) where these cells do not agree.
I've done this previously by using chained If and Or statements (e.g. if A1 = D1 or A1 = D1+1 etc etc) but this is laborious and means I have to change logic every time I add a new sample.
Is there a way of specifying a range of cells (e.g. A1,D1,H1, J1) and seeing if the values of these cells agree to within a stated tolerance? I'm happy to define named cells to specify and argument/attribute.
I need to be able to get a true/false from a tolerance percent.
Here is an example of what I am trying to do
cell a2 is Nitrogen cell b2 is (Known gas%) 2.4800% cell c2 is (unknown gas%) 2.4963% cell d2 is =b2-c2 and I get the answer no trouble there. what I need is to take the answer in cell d2 and set a plus/minus 2% tolerance in cell f2 and get a true/false comparison.
I have some code that consolidates data from 4 sheets in different workbooks into one sheet on a separate workbook. I'd like to add a validation check to make sure that all rows are copied and pasted.
Specifically, I would like to total the # of rows in each worksheet and compare that # to the total # of rows in the consolidated worksheet. On some of the worksheets, the code deletes the header row and/or the last row. So, the count of the rows should happen after those rows are deleted. If not all the rows are copied, a message box should pop up saying "Not all rows copied".
The full code is posted in the linked post below which includes the workbook names, sheet names, etc.:
It's a worksheet for testing milk tanks. The issue is as follows:
Column F = Chart Error/This can be either a positive or negative whole number Column G = Tolerance/This is always a whole positive number
Problem is I want Column H = Status to say "Pass" or "Fail" based on meeting the Column G number. But it's only the number itself (not whether it's Positive or Negative) that matters in determining the P/F status.
Examples:
Column F= -20 Column G= 15 Column H= Fails
or
F= 20 G= 15 H= Fails
The formulas I've been coming up with will show one or the other as Failing but not both + or - numbers if they fail to meet the G Column tolerance number.
I have a pair of digits in col B, that I would like to match with the digits in in col D, and display those matches in col E. If possible I would delete the duplicates in col E, and show results in col F.
I am trying to make code to randomly pair up players. I have found code which makes a button that randomly pairs up players in a list but I want to make it so that ? players are paired with ? other players instead of everyone at the same time so that a person dosn't get paired with more then one player at a time.
E.g. take the first 6 players in a last and pair them with the second 6.
This is the code I found:
Private Sub CommandButton1_Click() Dim x As Range, RanRng As Range, z As Range, oRes, Ray Dim i As Integer, j As Integer, real, oSt As Integer, cl As Range Dim oCol As Integer Set RanRng = Range(Range("A1"), Range("A" & Rows.Count).End(xlUp))
I have two lists that represent pairs of electrical connectors. List_1 is Male Connectors, and List_2 is the mating Female Connectors. The lists are built so that when side-by-side, a mating pair line up next to each other.
I'm trying to build a User Interface that presents the connectors as pairs, but also aloow the user to select EITHER member of the pair.
My first thougt was to use a Listview or a Listbox with 2 columns. Either way, the user selects a full row, rather a single entry in a row.
I finally ended up building a userform with 2 Listboxes adjacent to each other, and a Vertical Scrollbar Control to the right of the pair. I added the following code to the form, to scroll both Listboxes simultaneously:
Private Const Display_Lines As Long = 7
Private Sub ListBox1_Click()
Me.ListBox2.ListIndex = -1
End Sub
As far as that goes, it works fairly well. The user scrolls up and down using the Scrollbar control, and paired entries remain adjacent to each other. The user can select an entry from either Listbox, and I can easily harvest that choice through code.
I was hoping, however, that I could support people who use the keyboard for navigation.
Focus on one of the Listboxes, then navigate using the up and down arrow keys. When the user gets to the end of the list, the value of the Scrollbar control increments or decrements as required, thus re-populating the lists. I just can't get this to work in a way that is not cludgey. I have worked through about a half-dozen possible methods, and each one has some hitch that makes it either hokey or unworkable.
I have used excel to create a list of matching pairs, which I want to link together. The problem is, all I have been able to create is a very long list of matching pairs, and no way to link all the pairs together. My sheet looks like this.
a b 1 100 200 2 200 300 3 300 400 4 300 500 5 600 700 6 800 700
The first row shows that 100 goes with 200, and the other rows continue defining which blocks go together. What I need is a way to summarize all the blocks that link up, ie get 100-200-300-400-500 and 600-700-800 from this list of relationships. Can't do it with a lookup because some blocks link to multiple other blocks.
we want to add/concatenate the values of first column and show the result in next column. The problem is fully explained in the comment section of the sheet attached. But still if you are having in getting the problem
I have list of county roads and would like to organize them by odd number and pair. Macro that can change the pair number first then the odd number here is an example
ORIGINAL LIST COUNTY ROAD 32 & COUNTY ROAD 55 COUNTY ROAD 36 & COUNTY ROAD 55 COUNTY ROAD 51 & COUNTY ROAD 48 COUNTY ROAD 48 & COUNTY ROAD 35
************************************************************************>Microsoft Excel - Book2.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2B3B4B5B6B7B8B9B10B11B12B13B14B15B16B17B18B19B20B21B22B23B24B25B26B27B28B29=ABCD1 amount Abs amtMark x when paried up 2 (43,746.73)43746.73x 3 43,746.73 43746.73x 4 43,746.73 43746.73 5 (60,579.30)60579.3 6 (60,579.30)60579.3x 7 60,579.30 60579.3x 8 (98,416.85)98416.85x 9 98,416.85 98416.85x 10 98,416.85 98416.85 11 (500,000.00)500000 12 (500,000.00)500000 13 (500,000.00)500000 14 (500,000.00)500000x 15 500,000.00 500000x 16 (700,000.00)700000 17 (700,000.00)700000 18 (700,000.00)700000x 19 (700,000.00)700000x 20 (700,000.00)700000x 21 (700,000.00)700000x 22 (700,000.00)700000x 23 (700,000.00)700000x 24 700,000.00 700000x 25 700,000.00 700000x 26 700,000.00 700000x 27 700,000.00 700000x 28 700,000.00 700000x 29 700,000.00 700000x Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
****** http-equiv="Content-Type" content="text/html; charset=utf-8">****** name="ProgId" content="Word.Document">****** name="Generator" content="Microsoft Word 11">****** name="Originator" content="Microsoft Word 11"> Hi everyone,
I can't figure out how to mark a "x" for the paired up figures in column A as shown in the above spreadsheet using a formula(e) and/or VBA. At the moment I'm doing this manually. Imagine doing this for thousands of line... once a week
I have two sheets of data: sheet1 and sheet2. Data in sheet 1 and sheet 2 are in pair, ex: row1 and row2 is 1 pair, row 3 and row 4 is one pair ect…I need a program that start from each pair in sheet1 and search for it in sheet2, if that pair already exist somewhere in sheet2, then cut that pair from sheet1 and paste it into sheet3.
I want to create a simple worksheet that takes a list of names (All of the members of my family) and Randomly selects another name from that same list and matches them to it ( I don't want to say "paired" because I want each person to have a one way relationship to the other, in other words just because personA is matched to personB, i don't want personB to automatically be paired to personA) I hope that makes sense. Once every name on the list is matched with a person I would like to move that name to a database that I can track each year. The practical application of it is this: Each year our family randomly draws names and we are tasked to buy a new x-mas ornimate for that person, ideally you would not get the same person 2 years in a row, and the person that you have does not have you in return simply to add more variety and the database would track who had who each year.
Code: Sub test() Dim a, i As Long, temp, n As Long a = Range("b2", Range("b" & Rows.Count).End(xlUp)) Randomize With CreateObject("System.Collections.SortedList") For i = 1 To UBound(a, 1)
Excel user that has been manually computing a 6000 row spreadsheet. Here is sample data and what I need. Column A goes through the alphabet (A,B, C, etc.) and Column B is numbers from 1-65. I need Column C to count the number of rows for each alphabet/number pair. K, 28 has 3 rows; K, 33 has 1 row; L, 21 has 4 rows; etc.
I need to randomly pair players together to form teams.
For example: Saturday morning, there are 19 golfers signed up to play together, but want to paired randomly.
This is what we currently do: In cells A1:A27 I type their names. In B1:B27, I type their handicaps.
We then use a deck of cards to randomly draw teams. We do this by pulling 4-A's, 4-k's, 4-Q's, 4-J's, and 3-10's from the deck. We shuffle these cards and then go down the names in colum A and assign each palyer a card and place the card value into column C. We then highlight all three columns and sort by column C to form teams.
This works ok, but the problem is they all tee off at the same time and need a "super quick" process to form teams in seconds.
The only variable that I might see being a problem is the # of players vary each time they play. There might be 12 one day and 51 the next. We have to form teams into 4 somes and 3 somes, based on the total number of players we get.
I am having a problem in using lookup formula. Unfortunately for some entries it does not give the exact matching pair but one upper. I have attached the excel sheet. Please correct me where is the mistake. More about the sheet:
One column contains the alphabets from a certain language and second column contains corresponding unicodes. I want to search the unicode of a particulat alphabet using "lookup". Cell C4 is the key value. D4 uses lookup to get unicode value
