Color Cells Within Tolerance Percentage

Sep 13, 2007

I am trying to apply conditional formatting to multiple columns based on a percentage varience of the value in the first cell of each column. I'm sure this is not a new concept however I have been unable to find any advice when searching. I have attached an example of my problem as a picture speaks a thousand lines of code.

View 8 Replies


ADVERTISEMENT

Compare DDE Linked Cell For Percentage Tolerance Of Last Value

Aug 6, 2008

I have a DDE linked cell that is constantly updating (cell A1), I want then to have a cell (cell B1) that changes only when cell A1 differs from value currently in B1 by a certain percentage, then check B1 for the same tolerance level against A1, and repeat. I can do this in a number of ways in VB, however when VB code is running causes the DDE link not to update and since the update is constant I cannot use selectionChange and Change VB Worksheet function result in the same error.

View 6 Replies View Related

Check If 2 Cells Are The Same To A Tolerance

Mar 3, 2007

I am successfully using VBA to check a cell on one sheet against a cell on another sheet.

How easy would it be to check if this is the same OR less than 2 or more than 3? I have done part of this using nested formulas but cant find anything to help me with the syntax in VBA

The code I am using is

If W1.Cells(a, 3).Value = W2.Cells(b, 3).Value Then

View 4 Replies View Related

Excel 2007 :: Create Bar Chart That Changes Color Based On Percentage Range

Aug 7, 2012

I am trying to create a bar chart that changes color based on a percentage range. Any advice on how to do this? I am using Excel 2007, Windows XP, Sharepoint 2010.

View 1 Replies View Related

Formula To Set Up Tolerance

Aug 8, 2009

I use this formula to calculate if a move is out of tolerance =IF(ABS(B1)>=1,"Y","N") This will work on most of the stuff we load. I would like to modify it to if b1 = "Crude" then use =IF(ABS(B1)>=.5,"Y","N"), or if B1 = "Resid" then use IF(ABS(B1)>=2.0,"Y","N"). Is it possible to include the 3 tolerance bands in one formula?

View 9 Replies View Related

Color Column Charts Based On Font Color Data Cells

Oct 27, 2009

I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.

After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.

I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.

View 9 Replies View Related

Compare Numbers With Tolerance

Jul 6, 2007

I have two numerical columns of different length. One presents the signal and another one the background. Most of the background numbers are found in the signal column but they are not exactly the same and not located in the same rows. The numerical values are the same within some tolerance that I can specify. What I am trying to do it to remove all the background values from the signal column.

View 8 Replies View Related

Line Up Data With Tolerance

Jul 17, 2007

I have a large amount of data pertaining to many different runs in which I am given the mass to charge ratio of a compound. My goal is to identify these compounds, and to ease this process I am trying to find a formula that would “line up” near identical masses while providing a blank if no mass was found in that run. For example, if I have:

Run1
185.041
196.073
200.454
667.175


Run2
185.040
196.074
398.452
667.175

Run 3…etc

I would like to have it arranged:

Run1Run2
185.41185.040
196.73169.074
200.4540.00000
0.00000398.452
667.175667.175

It would be important to have some sort of tolerance setting, as the readings are not always exactly the same. Also, I’d normally have about six runs of data to line up.

View 8 Replies View Related

Compare Values With Tolerance

Jul 25, 2007

I am trying to replicate a method , it reads: 'any data point that changes by more than or less than 10% from the previous value, and does not remain at the new level for more than 6 days, should be removed.'

Thats a bit vague. The process is going to involve if statements, etc. I've attached an excel spreadsheet with some solutions I've tried. Neither of which work. The aim is to get the same answers as the highlighted column. Columns B and C replicate the method answer, but do not state the process. The letters L represent values less than 25. Its the letters D I'm trying to eradicate.

View 2 Replies View Related

Color Cells Based On Color Of Preceeding Cell

Nov 18, 2007

I am looking for a very simple script that will achieve the following:

On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:

From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.

View 5 Replies View Related

Macro To Color Cells Based On Their Font Color

Jun 18, 2008

I have a spreadsheet that i download from the net daily, which is seperated into columns of information.

I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.

For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.

If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.

I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.

View 9 Replies View Related

Find Duplicates Within A Percent Tolerance

Oct 26, 2008

Below is a short segment of my excel spreadsheet:

A B
1020.00242-89.84
1020 -88.11
1021 -85.3
1021.494-80.41
1021.49 -86.98
1030.04 -89.4
1030.042 -88.26
1030.94 -79.98
1030.933-81.5
1030.961-85.87
1040.0418-88.77
1040.391-87.3
1040.291-82.94
1040.016-84.12
1049.82 -84.7


What I need to do is write a macro that will find duplicates in Column A, within a changeable tolerance, say 0.1 (10%).

After finding all duplicates within a tolerance in A, I need to make another "Master" worksheet with the Duplicates from A, and their counterpart in B. So if A1 and A4 where within 10% of each other, the "Master" worksheet would contain:

A1 B1
A4 B4

using the values, giving:

1020.00242-89.84
1021.494-80.41

I tried using SUMPRODUCT and some other functions but just can't seem to put my finger on this one. I'm sure it's not hard and am overlooking something.

View 9 Replies View Related

Testing For Values That Vary Within Specific Tolerance?

Apr 22, 2014

I'm trying to identify where a set of values 'agree' within a specified tolerance.

I have a list of scores from different sources, and wish to both average them (easy to do) but also to identify how well they 'agree' by flagging those which have a difference above a specified tolerance. The numbers are all integers, and the tolerance will be an integer.

To give an example, I might have cells with values (2,3,2,2) and these agree within a tolerance of 1. If I had cells of (2,4,2,2) these wouldn't agree. I'd like to flag (by the creation of an 'X' within a separate column) where these cells do not agree.

I've done this previously by using chained If and Or statements (e.g. if A1 = D1 or A1 = D1+1 etc etc) but this is laborious and means I have to change logic every time I add a new sample.

Is there a way of specifying a range of cells (e.g. A1,D1,H1, J1) and seeing if the values of these cells agree to within a stated tolerance? I'm happy to define named cells to specify and argument/attribute.

View 2 Replies View Related

Formula For True/false Tolerance Percent

Aug 7, 2009

I need to be able to get a true/false from a tolerance percent.

Here is an example of what I am trying to do

cell a2 is Nitrogen
cell b2 is (Known gas%) 2.4800%
cell c2 is (unknown gas%) 2.4963%
cell d2 is =b2-c2 and I get the answer no trouble there. what I need is to take the answer in cell d2 and set a plus/minus 2% tolerance in cell f2 and get a true/false comparison.

View 4 Replies View Related

Multi Value Lookup With Tolerance For Rounding Differences

Sep 4, 2008

a lookup and match of two values.

For example, in Sheet1 I have a unique transaction reference number and a £ value.

eg. 60231568 £38.05

In the next sheet (Sheet 2), I have a summary of data, and I need to return the company name...

60231568 £38.04 Company X
60231568 £15.12 Company Y
60231568 £10.11 Company Z
60245871 £105.11 Company Q

The look up needs to match trans no, amount (within 3 pence threshold) and return in this example company X.

View 9 Replies View Related

Compare And Pair Rows Within Tolerance Range

Apr 8, 2008

I have an unknown number of rows that represent parts and 6 columns that represent part dimensions. I need to find and output matching pairs of parts that are within certain dimensional tolerance ranges.

For example:
Dimension 1 Dimension 2 to Dimension 6
Part 1
Part 2
to Part X

-I would need the code to check if Dimension 1 of Parts 1 & 2 were within a certain range and if Dimension 2 of Parts 1 & 2 were within a range etc. then (if all of them were true) output them as a pair. Otherwise, it would continue to search for paired parts. Once a pair is found, those parts can't be used again. How can I do this?

View 6 Replies View Related

Pass Or Fail Using Both Positive And Negative Numbers Against Tolerance

Aug 20, 2012

It's a worksheet for testing milk tanks. The issue is as follows:

Column F = Chart Error/This can be either a positive or negative whole number
Column G = Tolerance/This is always a whole positive number

Problem is I want Column H = Status to say "Pass" or "Fail" based on meeting the Column G number. But it's only the number itself (not whether it's Positive or Negative) that matters in determining the P/F status.

Examples:

Column F= -20
Column G= 15
Column H= Fails

or

F= 20
G= 15
H= Fails

The formulas I've been coming up with will show one or the other as Failing but not both + or - numbers if they fail to meet the G Column tolerance number.

View 6 Replies View Related

Percentage Of Cells That Start With X If Corresponding Cells Have Data

Mar 1, 2009

I need to calculate the percentage of cells in one column that have data in them compared to those that do not. This is easy enough to do by itself but here's where it gets tricky for me. I need this percentage calculated only when cells in a different column contain data.

Here's the specifics. All of the row and column references are exactly what I'm looking to have in my worksheet. If A5:A200 contain any value then I want to know the % of the cells in F5:F200 that have a value in them compared to the same number in F5:F200 that contain no value. I would like the answer to show up in B2.

Part of the issue is that cells A5:A200 already have a formula in them so I think that would count as a value. The one thing that might help is the fact that A5:A200 values that I'm looking for ALWAYS start with TN so that could be used as the search function. The reason why I need to base it on a value in A5:A200 is that the sheet is blank until I enter data in the rows. I can't have the blank rows below the last data that I've entered on the sheet count towards the percentage that I'm looking for.

Basically it's a sheet that I enter installations and service calls on. The information always has a TN# associated with it. Which through a formula is automatically populated in the same row in the A column. I track the installation or service call and when it's completed I enter a completion date in the F column in the same row.

I am trying to be able to keep track of the percentage of jobs completed (completion date entered in column F) compared to incomplete (cells in column F that have no completion date) but it has to only look at rows that actually have information entered in them which I think should be done by column A. column D5:D200 is where I enter the main information and there is no formula entered in the cells in column D so if it's easier to base it on that column then that's fine.

View 3 Replies View Related

Add Percentage To Multiple Cells All At Once?

Jul 6, 2012

i have a price list that I need to upgrade I will show how it is set now and what I need to do.

A1 B1 C1 D1 E1
=E1*1.25 59.99

Result $74.99

when i try to make E1 to a furmula (=E1+10%) it dose not work!!!

I need to add 10% to E1 so A1 is incresed 10% how do I do That

by the way I have much more cells than A1 it gose down to A123 and that is only page one.

View 3 Replies View Related

Calculate Percentage Between Two Cells

Jun 26, 2007

in A1 I have 57 in B1 I have 75 so if I calculate percentage between those two I should get somewhere around 5% instead I'm getting 76%,

what am I doing wrong, in C1 I have =A1/B1 and then formated under percentage.

View 6 Replies View Related

Calculating Percentage Difference Between Cells

Dec 5, 2013

Formula "(Cell-Cell)/ABS(Cell)"

When calculating percentage difference do I always subtract the smaller number/cell from the larger number/cell, then divide by the smaller number/cell or vice versa? Maybe I am over thinking it, but it is confusing the heck out of me

I provided an example below to illustrate a spreadsheet I work on. The numbers go up and down. I want to know how I should go about setting up the formula. If I need to ensure the smaller number is always subtracted from the bigger number, it will require a lot of manual intervention on my part.

Row 3 is =(b2-b1)/ABS(b1)Row 4 is =(b2-b1)/ABS(b2)Row 5 is custom. I went through each cell and made sure the smaller number was being subtracted from the larger number, then divided by the smaller number

PercDiffExample.xlsx

View 4 Replies View Related

Pull Extra Percentage Into Below Cells?

Jan 4, 2013

1st Quarter Goal23306.67%
2nd Quarter Goal00.00%
3rd Quarter Goal00.00%
4th Quarter Goal00.00%

The 306% cell has (B2+B3+B4)/7.5 in it to get that value. I need to dump any access percentage above 100% into the next quarters goal. so 2nd should be 100 and 3rd should be 100 and 4th should be 6.67.

View 8 Replies View Related

Taking Percentage Of The Larger Of Two Cells

Sep 19, 2006

I hope my title was clear enough, but I’m not sure how to set this up. I have numbers in cells B4 and B13. I want to take the largest of these two numbers and multiply it by 0.85. I then want to take this number and compare it to a number in cell B23. If B23 is greater than the larger of B4 and B13 X 0.85, I want B33 to display “No” in a boldfaced red font. If B23 is less than the larger of B4 and B13 X 0.85, I want B33 to display “Yes” in a normal black font. This formula will be in cell B33.

View 5 Replies View Related

Add 2 Cells Show As Percentage Of 3rd Cell But Still Allow For 0 Values

May 23, 2013

I am trying to add 2 cell values together then show the total as a % of a value in a 3rd cell, however I also need it to allow for 0 values in the chosen cells without displaying an error message or it messes up the average formula elsewhere on the sheet?

View 2 Replies View Related

Decrease Decimals If Cells Formatting Is In Percentage

Feb 27, 2014

Is it possible through a macro that the cells where numbers is in percentage format should not show any decimal points (is should not roundoff) just decimal points should not visible. I am aware that this can be done by "decrease decimal" but data will be across thousand of rows manually it will be very time consuming.

I have attached a sample worksheet : Percent.xlsx

View 3 Replies View Related

Calculating Percentage Based On Dynamic Cells

Dec 15, 2008

I need to calculate the percentage based on self populating score. however I want excel/formula to ignore any cells which has "NA" in it so that it calculates the percentage based only on the cells having Numbers.

Now these Cells which contain Numbers might or might not contain numbers based on the "IF" function which decides wether the cell will have numbers or will remain "blank" or have "NA". To understand better please have a look at the enclosed sample (that would explain my need better)

View 4 Replies View Related

Compare Words Between Two Cells And Get Matching Percentage

Apr 19, 2010

I have a column with 10,000+ lines, and lots of them are duplicated.

I have a formula that tells me how many times they are duplicated, but it only looks for 100% matching cells.

Now, lots of cells are partially duplicated, for example:

A1 - Team Abcde
A2 - Team Abcde Fghi
B1 - Team Abc

I would like to have a formula giving me a percentage of how two cells are similar to each others by checking the words. In this case, B1 is 50% similar to A1 because only the word 'Team' is duplicated. B1 is only 33,34% similar to A2.

View 14 Replies View Related

Highlighting Cells To Show Percentage Complete?

Feb 20, 2013

I am trying to calculate a percentage complete based on what a cells color is, the function must count the cells of a certain color (signifying in this case that something is complete for a particular "area") and distinguish that from cells in the same data range that aren't colored and calculate the percentage that are complete.

View 3 Replies View Related

Divide 2 Cells & Express Result As Percentage

Oct 6, 2006

I need to divide Cell "A" with Cell "B" and put have the final sum in Cell C. e.g. Cell A===10 Cell B=2 Therefore, I want Cell C to say 5

View 6 Replies View Related

Format All Percentage Cells To X Decimal Places

May 17, 2008

I would like to do the following: * Format numeric cells (cells with a percent sign) to zero decimal places. I have a set of macros that I am combining to clean up a data set and these are two of many (removing blank lines, duplicates, blue/bold, etc.)

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved