Pair Matching/linking
Jun 2, 2007
I have used excel to create a list of matching pairs, which I want to link together. The problem is, all I have been able to create is a very long list of matching pairs, and no way to link all the pairs together. My sheet looks like this.
a b
1 100 200
2 200 300
3 300 400
4 300 500
5 600 700
6 800 700
The first row shows that 100 goes with 200, and the other rows continue defining which blocks go together. What I need is a way to summarize all the blocks that link up, ie get 100-200-300-400-500 and 600-700-800 from this list of relationships. Can't do it with a lookup because some blocks link to multiple other blocks.
View 4 Replies
ADVERTISEMENT
Mar 14, 2009
I am having a problem in using lookup formula. Unfortunately for some entries it does not give the exact matching pair but one upper. I have attached the excel sheet. Please correct me where is the mistake. More about the sheet:
One column contains the alphabets from a certain language and second column contains corresponding unicodes. I want to search the unicode of a particulat alphabet using "lookup". Cell C4 is the key value. D4 uses lookup to get unicode value
View 2 Replies
View Related
Nov 4, 2008
I have a pair of digits in col B, that I would like to match with the digits in in col D, and display those matches in col E. If possible I would delete the duplicates in col E, and show results in col F.
View 9 Replies
View Related
Nov 19, 2012
I am trying to make code to randomly pair up players. I have found code which makes a button that randomly pairs up players in a list but I want to make it so that ? players are paired with ? other players instead of everyone at the same time so that a person dosn't get paired with more then one player at a time.
E.g. take the first 6 players in a last and pair them with the second 6.
This is the code I found:
Private Sub CommandButton1_Click()
Dim x As Range, RanRng As Range, z As Range, oRes, Ray
Dim i As Integer, j As Integer, real, oSt As Integer, cl As Range
Dim oCol As Integer
Set RanRng = Range(Range("A1"), Range("A" & Rows.Count).End(xlUp))
[Code] ........
View 1 Replies
View Related
Apr 23, 2007
I have two lists that represent pairs of electrical connectors. List_1 is Male Connectors, and List_2 is the mating Female Connectors. The lists are built so that when side-by-side, a mating pair line up next to each other.
I'm trying to build a User Interface that presents the connectors as pairs, but also aloow the user to select EITHER member of the pair.
My first thougt was to use a Listview or a Listbox with 2 columns. Either way, the user selects a full row, rather a single entry in a row.
I finally ended up building a userform with 2 Listboxes adjacent to each other, and a Vertical Scrollbar Control to the right of the pair. I added the following code to the form, to scroll both Listboxes simultaneously:
Private Const Display_Lines As Long = 7
Private Sub ListBox1_Click()
Me.ListBox2.ListIndex = -1
End Sub
As far as that goes, it works fairly well. The user scrolls up and down using the Scrollbar control, and paired entries remain adjacent to each other. The user can select an entry from either Listbox, and I can easily harvest that choice through code.
I was hoping, however, that I could support people who use the keyboard for navigation.
Focus on one of the Listboxes, then navigate using the up and down arrow keys. When the user gets to the end of the list, the value of the Scrollbar control increments or decrements as required, thus re-populating the lists. I just can't get this to work in a way that is not cludgey. I have worked through about a half-dozen possible methods, and each one has some hitch that makes it either hokey or unworkable.
View 9 Replies
View Related
Dec 11, 2009
How to make Rumble 3 digits from pair's
View 9 Replies
View Related
Feb 4, 2014
we want to add/concatenate the values of first column and show the result in next column. The problem is fully explained in the comment section of the sheet attached. But still if you are having in getting the problem
View 6 Replies
View Related
Mar 16, 2014
I have list of county roads and would like to organize them by odd number and pair. Macro that can change the pair number first then the odd number here is an example
ORIGINAL LIST
COUNTY ROAD 32 & COUNTY ROAD 55
COUNTY ROAD 36 & COUNTY ROAD 55
COUNTY ROAD 51 & COUNTY ROAD 48
COUNTY ROAD 48 & COUNTY ROAD 35
[Code] ...........
View 4 Replies
View Related
Jan 5, 2009
************************************************************************>Microsoft Excel - Book2.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2B3B4B5B6B7B8B9B10B11B12B13B14B15B16B17B18B19B20B21B22B23B24B25B26B27B28B29=ABCD1 amount Abs amtMark x when paried up 2 (43,746.73)43746.73x 3 43,746.73 43746.73x 4 43,746.73 43746.73 5 (60,579.30)60579.3 6 (60,579.30)60579.3x 7 60,579.30 60579.3x 8 (98,416.85)98416.85x 9 98,416.85 98416.85x 10 98,416.85 98416.85 11 (500,000.00)500000 12 (500,000.00)500000 13 (500,000.00)500000 14 (500,000.00)500000x 15 500,000.00 500000x 16 (700,000.00)700000 17 (700,000.00)700000 18 (700,000.00)700000x 19 (700,000.00)700000x 20 (700,000.00)700000x 21 (700,000.00)700000x 22 (700,000.00)700000x 23 (700,000.00)700000x 24 700,000.00 700000x 25 700,000.00 700000x 26 700,000.00 700000x 27 700,000.00 700000x 28 700,000.00 700000x 29 700,000.00 700000x Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
****** http-equiv="Content-Type" content="text/html; charset=utf-8">****** name="ProgId" content="Word.Document">****** name="Generator" content="Microsoft Word 11">****** name="Originator" content="Microsoft Word 11"> Hi everyone,
I can't figure out how to mark a "x" for the paired up figures in column A as shown in the above spreadsheet using a formula(e) and/or VBA. At the moment I'm doing this manually. Imagine doing this for thousands of line... once a week
View 9 Replies
View Related
Dec 22, 2009
I have two sheets of data: sheet1 and sheet2. Data in sheet 1 and sheet 2 are in pair, ex: row1 and row2 is 1 pair, row 3 and row 4 is one pair ect…I need a program that start from each pair in sheet1 and search for it in sheet2, if that pair already exist somewhere in sheet2, then cut that pair from sheet1 and paste it into sheet3.
View 12 Replies
View Related
Jan 17, 2013
In A1
01234
In B1:k1
01 02 03 04 12 13 14 23 24 34
I am looking for a formula that will combine each digit together as a 2 digit value
Is this even posible?
The value in A1 could range from a 3 to 9 digit value.
View 3 Replies
View Related
Oct 23, 2013
I want to create a simple worksheet that takes a list of names (All of the members of my family) and Randomly selects another name from that same list and matches them to it ( I don't want to say "paired" because I want each person to have a one way relationship to the other, in other words just because personA is matched to personB, i don't want personB to automatically be paired to personA) I hope that makes sense. Once every name on the list is matched with a person I would like to move that name to a database that I can track each year. The practical application of it is this: Each year our family randomly draws names and we are tasked to buy a new x-mas ornimate for that person, ideally you would not get the same person 2 years in a row, and the person that you have does not have you in return simply to add more variety and the database would track who had who each year.
Code:
Sub test()
Dim a, i As Long, temp, n As Long
a = Range("b2", Range("b" & Rows.Count).End(xlUp))
Randomize
With CreateObject("System.Collections.SortedList")
For i = 1 To UBound(a, 1)
[Code] ......
View 1 Replies
View Related
May 30, 2014
Excel user that has been manually computing a 6000 row spreadsheet. Here is sample data and what I need. Column A goes through the alphabet (A,B, C, etc.) and Column B is numbers from 1-65. I need Column C to count the number of rows for each alphabet/number pair. K, 28 has 3 rows; K, 33 has 1 row; L, 21 has 4 rows; etc.
Column A
Column B
Column C
K
28
3
K
28
3
K
28
3
[code]....
View 2 Replies
View Related
Mar 19, 2008
This is my Excel dilemma: creating roundrobin pairs.
For a given list of numbers, I need to generate pairs where each number is paired with all the other numbers without creating a duplicate pair.
For example: 1,3,4,6... (dynamic)
Pairs: 1-3, 1-4, 1-6, 3-4, 3-6, 4-6
Results should be generated in two columns. Column A would be ID1, Column B would be ID2 (the combination of both would be the pair created)
ID1ID2131416343646
I have basic ideas for a macro but the loop within a loop and the OFFSET for the next row is something I really can't put together.
View 9 Replies
View Related
Jun 10, 2008
I need to randomly pair players together to form teams.
For example:
Saturday morning, there are 19 golfers signed up to play together, but want to paired randomly.
This is what we currently do:
In cells A1:A27 I type their names. In B1:B27, I type their handicaps.
We then use a deck of cards to randomly draw teams. We do this by pulling 4-A's, 4-k's, 4-Q's, 4-J's, and 3-10's from the deck. We shuffle these cards and then go down the names in colum A and assign each palyer a card and place the card value into column C. We then highlight all three columns and sort by column C to form teams.
This works ok, but the problem is they all tee off at the same time and need a "super quick" process to form teams in seconds.
The only variable that I might see being a problem is the # of players vary each time they play. There might be 12 one day and 51 the next. We have to form teams into 4 somes and 3 somes, based on the total number of players we get.
View 9 Replies
View Related
Apr 8, 2008
I have an unknown number of rows that represent parts and 6 columns that represent part dimensions. I need to find and output matching pairs of parts that are within certain dimensional tolerance ranges.
For example:
Dimension 1 Dimension 2 to Dimension 6
Part 1
Part 2
to Part X
-I would need the code to check if Dimension 1 of Parts 1 & 2 were within a certain range and if Dimension 2 of Parts 1 & 2 were within a range etc. then (if all of them were true) output them as a pair. Otherwise, it would continue to search for paired parts. Once a pair is found, those parts can't be used again. How can I do this?
View 6 Replies
View Related
Feb 1, 2007
I have a master worksheet that contains a lot of datas. Example below:
Invoice # Code Customer Money
1 1101 a 10
2 1102 a 20
3 1102 b 30
4 1103 c 40
5 1104 d 50
6 1101 a 60
7 1103 c 70
After creating a pivot table with code, customer as Row and money as Data, I get this:
Sum of money
Code Customer Total
1101 a 70
a Total 70
1102 a 20
a Total 20
b 30
b Total 30
1103 c 110
c Total 110
1104 d 50
d Total 50
Grand Total 150
Suppose now, I have another data named Rate that I need to associate with each pair of Code and Customer. See below:
Sum of money
Code Customer Total Rate..................
View 2 Replies
View Related
Jan 20, 2013
My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.
When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.
I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).
for example:
p1
data
data
data
data
p2
data
data
data
data
[Code] .....
needs to become:
p1
data
data
data
data
[Code] .....
I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).
View 5 Replies
View Related
Nov 19, 2009
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
View 12 Replies
View Related
Mar 28, 2007
Here's what I have.. (on a much smaller scale)
http://www.jmetenterprises.com/produ...pics/excel.jpg
(notice how the lines that match are now even.)
[Edited by admin~ *Link* to large images, don't display them]
View 9 Replies
View Related
Feb 15, 2009
I am attaching a worksheet which shows what I would like to see. I am having difficulty writing the formula. The database I have is a list of forex trades. Each trade is made at a specific time, and involves a specific currency pair (such as EURUSD). I want to summarize the trades in a table which sums up a week's trades for each pair. (see worksheet).
View 5 Replies
View Related
Feb 27, 2014
I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...
And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2
Table 1:
50025
50026
50086
Table 2: Considering that name, age and location is each in separate cell
50025JohnSecond25Location 1
60085EmilyThird 20Location 2
45454Wilhelm Fourth35Location 3
10000RoseFifth 60Location 4
50086JohnySixth 45Location 5
65501JacobSeventh18Location 6
50026Jackie Eighth22Location 7
And the outcame should be that it finds the value from Table1 in Table2 and copy's information in Table 1 like this:
50025 JohnSecond25Location 1
50026 Jackie Eighth22Location 7
50086 Johny Sixth 45Location 5
View 2 Replies
View Related
Feb 20, 2014
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
View 1 Replies
View Related
Jan 27, 2014
see attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.
Exemple.xlsx
View 6 Replies
View Related
Jan 28, 2010
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
View 9 Replies
View Related
Jun 20, 2014
It is quite standard to create links between workbooks, and generally I do this by inserting an "=" sign in the cell I want data to appear in for Workbook 1, I then open workbook 2 where the desired data is and click on the cell housing the data I want.
I just went to do this, and upon putting the = sign in the cell I want in workbook 1 and clicking in workbook 2 nothing happens except my cursor is now in workbook 2 and the = sign just remains alone in the workbook 1 cell.
If, however, I put an = sign in a cell in workbook on and then click another cell in that sheet or a cell in another worksheet but in the same workbook a proper link is created, so the problem seems to be isolated to links to other workbooks.
View 1 Replies
View Related
May 27, 2008
I've attached a basic excel file with an example of the problem I need to solve. As you can see, if you select "No" to "Do they have a pet?" then conditional formatting blocks out the next field. The problem with that is, it still allows you to enter a value into the "Type" field which is skewing my results. Is there a way to allow a value in "Type" ONLY if there is "Yes" in "Do they have a pet?". I would also like it to delete the value in "Type" if I later select "No" instead of just covering it up. Is this possible? I'd like to avoid the scripting route if at all possible but I'm not sure it is...
Also, I have two linked spreadsheets, one pulls the totals off the other. However, If I add rows into the original it does not update the total formulas in the second sheet. Is there a way to make it do this automatically?
View 10 Replies
View Related
Aug 5, 2008
I am working with excel2003. I have to different workbooks in which on is a Bill of lading that is used to show the items being shipped. The other workbook has a list of the items that we ship.
On the BOL I want to be able to type in the "L" number (or I.D. number) in D14, D19, D24, D29. By typing in the L-number I want it to automatically bring up the product name into cells E14, E19, E24 and E29. With the exact name of the item it will help prevent employee error. I want it to also bring over the exact weight over from the flavor list in cell range C5:C28.
I have the FlavorCodes range with all the L-numbers on the BOL in cell range U9:U48. I thought I had it set up correctly but when I select the L-number in the drop down list in cells E14, E19, E24 and E29 I get error code #NA. I thought I defined the cell range but it is still not working.
The workbooks are attached below.
View 12 Replies
View Related
Dec 1, 2008
I have a problem and wanted to know if there was an easier way to create links to various worksheets. I have a folder with 59 worksheets. The names of the Worksheets are the weeks of the year(example LA-01-01-09) I have another workbook with 13 worksheets one for every month and a sheet that totals the whole year up.
What I want to know is how can I create a link to everyone of those weekly sheets to go to my monthly sheets,so when data is entered into the weekly sheet the monthly sheet will update automatically? The weekly sheets are setup exactly the same. I'm looking only to pull row 3 columns c:d:f:g:h:i over to my monthly sheet.
I have an example of my weekly sheet and monthly sheet.
View 6 Replies
View Related
Jun 9, 2009
I have a Form that when the 'SUBMIT' button is clicked, I would like to validate the information and then write it to a 'MASTER SHEET'. However, the validation has gotten lengthy and I have opted to put the validation code in a separate Module to keep my general code a little cleaner.
PROBLEM:
The original code would kick you back to the form if something was wrong via a 'END SUB', but as now the SUB is on a different Module, it isn't working.
Here is the pertinent code on the general code sheet: ....
View 13 Replies
View Related
