Compare Format In VBA
Mar 18, 2009how to compare format in VBA
eg: I want to check if a particular cell has this format "MM/DD/YYYY hh:mm"
ADVERTISEMENT
Compare 2 Worksheets In Different Format?
Aug 15, 2013I have 2 worksheets I need to compare. One of the worksheets is sent to me from a vendor and its not in the same format (regarding the order of column labels). What would be the most efficient method to compare these two spreadsheets in a way that I can call out anything that is not in BOTH spreadsheets?
For example, if John Doe shows in spreadsheet A but not in spreadsheet B, can I get that to call out? Likewise if its in B but not A? Im basically trying to locate all discrepancies between the two.
Not sure if I have to get both worksheets in the same column order or not
How To Compare Cells And Format Conditionally Over Whole Sheet
May 30, 2014I wish to compare two sheets [Sheet1 and Sheet2] within one workbook and format the second sheet conditionally, based on an exact match to the first sheet.
Cell by cell, I can add the specific conditional formatting rule to each cell but this is tedious and its hard to see where I have applied the conditional format and where not.
So I tried to construct a macro to apply to a range of cells.
I tried to assign the logical result of the compare test to a cell outside of the range[lets say on Sheet2, A1] , and then format the range cells based on that logical value. I think my error is in conditional format criterion but I am a bit stuck.
[Code] .....
Find, Compare And Assign A Value For Schedule Format.
Jul 30, 2009I have a schedule database the one I need to transform some cell values in time format. The thing is that I have the format as follows, and I was trying to set a macro to convert every "*" in 15 min value without succcess.
Example
Associate below works as folllows:
Sat 3:30 - 8:30 Mon: 4:00 - 8:00
Sun 2:30 - 5:45
*(start) represents 0:15 min value.
I need to transform the *'s and sum the time format and place the value below the START and STOP column.-
Note: (disregard dots)
Agent: Julia Roberts
Day Start Stop 00:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00
Sat.............................................** **** **** *** **** **
Sun.....................................** *** **** ***
Mon ...............................................**** **** **** ****
etc
Conditional Format - Compare To An Adjacent Column Of Numbers
Sep 15, 2009I have a column of numbers (column A) which I'd like to compare to an adjacent column of numbers (column B) and, by row, determine if the number is larger.
If it is, I'd like to place a different colour on the cell. What is the formula I need to use to accomplish this?
Ex:
Col A Col B
30,000 5,000 - A is larger than B, therefore A is formatted RED
20,000 20,000 - A is the same as B, therefore no format applied
10,000 15,000 - A is less than B, therefore A is formatted GREEN
Excel 2013 :: Pivot Table Compare Current Data With Refresh Data And Format New Values?
Jun 18, 2014vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
Compare Column A To Column B Then Highlight / Format Any Duplicates
Mar 17, 2014Trying to compare a list of names in 2 columns. Column A has a short list of names I'm looking for in the long list of Column B.
How can you create the macro that does...
If any value in Column A matches any value in Column B
Then format (bold, highlight, etc...)
How To Compare Multiple Values Including TIME And Compare Rate
Feb 21, 2014Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx‎
Compare, Truncate, Compare Again, Write (VBA)
Mar 10, 2009I have two ranges of numbers stored as text on two different sheets.
The first one is from product code and the second is from product category.
The problem is both ranges are of different lengths and I have to find out if a product from the right is part of a particular product category. Even if the length is different the first digits are indicative of the belonging of a code. For example 1234 and 12345 are “family”-their first 4 digits match.
Just to give you an example of what is desired:
Category____ Code
2200 ________22002
2323________ 232347
So, the loop should do the following:Compare the first string from the “Category” column to each and every entry on the right, if a match exists (we have no match here for 2200) write “ok” next to it.
Next trim one digit from the right from every string in the “Code” column.
Compare same first string from the “Category” column to each trimmed string from “Code” column (here we should have a match 2200=2200)
Write “ok” next to it
Now the loop goes to the second string from “Category” column and for this one we will have to trim 2 digits from the right of each string in “Code” column to achieve the result (2323=2323) and so on.
Compare Date: Compare The Date From The User Input And The Date Listed
Jan 18, 2007I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
Userform Date Format Reverting Back To Us Format On Change Event
Aug 10, 2009I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
Convert Cells With Percentage Format To 'same' Decimal In A Column With Mixed Format
Jun 7, 2006I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies View RelatedConverting Times Stored In Date Format To Number Format?
Mar 31, 2014One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies View RelatedTime Format: Format Cells To Contain Minutes, Seconds And Hundredths
Oct 15, 2009How can I format cells to contain Minutes, Seconds and Hundredths of seconds to be used in calculations eg 1.24.99 means 1 minute and 24.99 seconds. Example calculation is: 1.24.99 - 1.24.90 =0.0.09
View 2 Replies View RelatedFormat Climatic Data From A Weather Station Into A Desired Format
Feb 11, 2009I need to format some climatic data from a weather station into a desired format. There are a lot of cut&paste and transposing involved. I think it will be easy but tedious for anyone trained in VB to write a macro but unfortunately I am not. I've tried recording a macro but it turns out that it is not general enough to deal with all the spreadsheets that I've got.
I've attached a spreadsheet which shows the original format (in sheet 1) and the desired format (in sheet 2). To briefly describe, I only need the temperature data for 8am and 2pm, the rest of the information in sheet 1 is useless to me.
Macro Or VBA - Search General Format Convert To Date Format
Oct 26, 2012Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
Excel 2010 :: Number Format Keeps Switching To Date Format?
Aug 1, 2013I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
Save Conditional Format Colour But Delete Condition Format
Dec 19, 2006I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
Vlookup Function: Re-format The Information Into A Horizontal Format By Week
Feb 3, 2007I have a forecast which is sorted by product code by week vertically. I need to create a lookup to re-format this information into a horizontal format by week. I have started this by transposing the information as my attachment shows but I am hoping there is a lookup formula which will be easier and quicker. I have attached the actual document and the data I want to sort is Sheet 2. I have started in Sheet 1. I want to look up the code in column A, then lookup the week number which would be B2 in Sheet 1 and return the value of that Code in that week from Sheet 1.
View 2 Replies View RelatedChange Cell Format Based On Existing Currency Format
Jun 12, 2008I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies View RelatedConvert Data In Invalid Format Into Correct Format
May 1, 2014I have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from
MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
Save Number As Text In Txt Format Wo Changing The Format
Mar 1, 2007In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
Format Email Generated By Sheet To Have An HTML Format
Jan 24, 2010I'm trying to format my email generated of excel sheet to have an HTML formal before they are sent out using MS Outlook.
I have googled, searched your forums and also tried to figure out a solution with the existing helps on the internet. I need help on how to format emails genarated out of my excel sheet. I know a bit of HTML syntax but a newbie to VBA. I'm guessing the formatting has to be done in the Emailbody text function in my code.
I'm also trying to understand the logic behind the code and also learning excel vba bit by bit at the minute.
Copy And Paste Actual Format From Conditional Format?
Apr 12, 2012I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies View RelatedMacro To Change Date Format To General Format
Oct 17, 2012I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies View RelatedSome Dates In Format Not Being Converted Into Normal Date Format?
May 23, 2014I have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013
Change A Date In Text Format Into Regular Format
Jan 10, 2007I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
Format Cell: Changing The Format Of Sheet2 To Exactly Like The Following Image Below
Jun 27, 2007I need in changing the format of sheet2 to exactly like the following image below.
*there are some codes in sheet2 which I think is the place to change the format.
Pasted European Date Format Coverting To US Format
Mar 19, 2008I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
Format Currency As Correct German Format
Jan 23, 2009I have a spreadsheet which needs to display currency in the correct format dependant upon whether a contract is in English or German Law. Excel defaults currency format as €310,000.00 however in German this needs to be €310.000,00 i.e. with the decimal point and comma in opposite positions. Does anyone know what expression I can use to format it as the latter?
View 2 Replies View Related
