Compare To Table
Aug 2, 2006
I am green to Excel, but I am trying to create a worksheet for my own use. I have written a 2 column table of calculated numbers. Now I have another number generated that I wish to compare to the first column in the table. The generated number will not be an exact match. If the generated number is greater than a first column number but less than the next first column number, I wish to return the associated 2nd column number. Is this possible? There will be over 1000 numbers to compare. Is there one single string of code that will work for all comparisons? I can write this with if statements, but each cell is unique and I don't think I will live long enough to write 1000 cell.
View 9 Replies
ADVERTISEMENT
Dec 16, 2009
I have a sheet (name “master”) that I need to compare against data in a table. For each row, I am looking at two columns of information that I need to compare against the data table. The columns are (1) “State of Sale” and (2) “Associate ID”. I need to determine if the associate is allowed to make sales in the state that is identified, which requires looking at the data sheet.
This steps I need to take are as follows:
1 – grab the associate ID and determine if it is in the data sheet. If the ID is not in the sheet, then “No record found”. Else, go to next step
2 – if the ID was found in the data sheet, then the next step is to grab the “State of Sale” and compare against the data table. Go to the row of ID in question, and then go to the column of the State code in question. If there is an “x” in the intersecting cell, then sale is “ok”. If there is not an “x”, then “sales violation”.
View 2 Replies
View Related
May 9, 2014
I would like to compare % difference between date range through pivot table
Date RangeProductAmt
1st weekABC1000
2nd WeekABC2000
3rd WeekABC1259
1st weekXYZ3000
2nd WeekXYZ4000
3rd WeekXYZ2500
How to plot a Pivot table to compare the % difference between 3rd Week Vs 2nd Week Vs 1 Week for each product through pivot table?
View 2 Replies
View Related
Apr 24, 2008
I wrote a macro for a pivot table.
Range("A1").Select
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"Export!R1C1:R3000C53").CreatePivotTable TableDestination:="", TableName:= _
"PivotTable4", DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
ActiveSheet.PivotTables("PivotTable4").AddDataField ActiveSheet.PivotTables( _
"PivotTable4").PivotFields("Reference"), "Count of Reference", xlCount
With ActiveSheet.PivotTables("PivotTable4").PivotFields("ACN received date")
.Orientation = xlRowField
.Position = 1
End With
What i want to know is if there is a code line to test if "Non Processed" value exists in column "Status" and then hide the value.
Now, if the macro does not find one value just gives me error.
View 7 Replies
View Related
May 6, 2008
I have built a macro that tests to see if a date in a range is before the Period Start Date, and if it is, then the labor rate in that same row (3 Columns Over) should be escalated by the appropriate AWI. My code below works, but I am wondering if there is a better way than using offset(0,3) to prevent a code breakdown if columns are inserted between the Date and Rate columns. The date range is names "DATES" and the rate column in names "RATES"
Sub CountTheCells()
Dim cell As Excel.Range
Dim i As Integer
For Each cell In Sheet2.Range("DATES")
If cell.Value < Sheet2.Range("POPS") Then
i = i + 1
End If
Next
MsgBox ("You have " & i & " Rates that will be escalated b4 the POP Begins")
yesno = MsgBox("Would you like to Escalate the Dates and Rates?", vbYesNo)
If yesno = vbNo Then
MsgBox ("Not Done")
Else..........................
View 2 Replies
View Related
Aug 9, 2012
I have 29 excel files with some number of worksheets from 1 to 4. The name of the worksheets are the same in all the spreadsheets. Then I've a got a pivot table. I have to compare some data (3 columns) from the pivot table to the numbers from all these sheets from 29 excel files.
How to do it in a most efficient way?
View 4 Replies
View Related
Jun 18, 2014
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
View 1 Replies
View Related
Feb 21, 2014
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx‎
View 3 Replies
View Related
Mar 10, 2009
I have two ranges of numbers stored as text on two different sheets.
The first one is from product code and the second is from product category.
The problem is both ranges are of different lengths and I have to find out if a product from the right is part of a particular product category. Even if the length is different the first digits are indicative of the belonging of a code. For example 1234 and 12345 are “family”-their first 4 digits match.
Just to give you an example of what is desired:
Category____ Code
2200 ________22002
2323________ 232347
So, the loop should do the following:Compare the first string from the “Category” column to each and every entry on the right, if a match exists (we have no match here for 2200) write “ok” next to it.
Next trim one digit from the right from every string in the “Code” column.
Compare same first string from the “Category” column to each trimmed string from “Code” column (here we should have a match 2200=2200)
Write “ok” next to it
Now the loop goes to the second string from “Category” column and for this one we will have to trim 2 digits from the right of each string in “Code” column to achieve the result (2323=2323) and so on.
View 9 Replies
View Related
Jan 18, 2007
I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
View 2 Replies
View Related
Jun 12, 2013
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
View 2 Replies
View Related
Feb 1, 2010
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
View 14 Replies
View Related
Mar 14, 2014
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
View 2 Replies
View Related
Apr 14, 2009
I would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
View 3 Replies
View Related
Mar 27, 2012
I have a very large excel data file, which I want to analyse using pivot tables. The problem is that while most of the columns are headed with the variable name (e.g. country) and have the list of variables displayed under that heading for each observation (e.g. Italy), the years are spread across the columns - i.e. the heading for column X is not "Year", but is 2003, with the next column being 2004, etc.
Is there a quick way I can re-arrange the data so that the layout is consistent and so that I can use it for pivot tables? I have way too many observations to do this by hand.
View 1 Replies
View Related
Sep 11, 2009
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
Table 1
Team 1Team 2Team 3Team 4Team 4Team 5Team 5ABABCity 12531642City 231173705City 367891125City 436251348
Table 2
City 4City 2City 1City 3Team 4BTeam 2Team 5ATeam 4ATeam 1Team 3Team 5B
View 2 Replies
View Related
Sep 8, 2009
Data Table including-
List of Identifying Code Numbers for customer invoices
Multiple repetitions of individual Identifying Code Numbers in list
Various data in table range including Various Values of invoices from different dates for each repetion of Identifying Code Number.
- Wish to find largest invoice for each Individual Identifying Code Number in the table without using a pivot table.
i have tried combining Max and Large functions with Vlookups etc.
View 9 Replies
View Related
Oct 5, 2011
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
View 2 Replies
View Related
Apr 26, 2012
Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
View 3 Replies
View Related
Dec 17, 2012
I have a table with list of equipments and asset number assigned as primary key, I wanted to have a history movement of these equipments but my idea is somehow not logical and very primitive to update every time 2 excel sheets:
ie:
asset no
description
received by
day
[Code].....
View 2 Replies
View Related
Mar 13, 2013
Table 1
January-12
February-12
March-12
Table 2
Sr. No
Name
Dep
Lates
CL / SL
AL
Lates
CL / SL
AL
Lates
CL / SL
AL
[Code].....
View 1 Replies
View Related
Jun 2, 2013
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
View 9 Replies
View Related
Feb 25, 2014
When I add a table in Excel, I can choose from Table Styles, different styles that set one color for even rows and another color for odd rows.
Is there a way to say to this Table Style that assign one color for rows that have the same string in column A in consecutive rows and another color when the string in colum A changes?
I mean,
If A1= XYZ, A2=XYZ assign blue to row 1 and 2.
If A3:A9=FTG assign green to rows 3 to 9.
If A10:A13=LLKF assign blue again to rows 10 to 13.
If A14:A22=WUR882 assign green again to rows 14 to 22.
and so on.
View 2 Replies
View Related
Jul 15, 2014
I have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description
1/1/2014
1/2/2014
1/3/2014
Cheese Burgers
2
3
4
Hot Dogs
5
12
6
Beverages
2
5
3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description
Date
Quantity
Cheese Burgers
1/1/2014
2
Hot Dogs
1/1/2014
5
[Code] ....
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
View 3 Replies
View Related
Jul 24, 2008
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies
View Related
Nov 5, 2008
I want to accomplish something like this but slightly different:
[url]
I have the same issue but a bit more complex. In my case I have an additional amount of columns (let's say dimensions). So for the example given (sales per month) I would add two columns for 4 different regions and 5 machine types (just examples).
The output (that would serve as pivot tabel input) would then have to be a 4 x 5 x 12 x 4 = 960 row database table.
I have tried to accomplish it by customizing the given code but that provedto be beyond my powers ;o)
and some 3rd party software [url]and [url] but non of them is doing what I'm looking for.
The code I'm looking for ideally would count the number of columns and unique records per column and construct the database table from that. So I am looking for flexibility in the number of dimensions also...
View 6 Replies
View Related
May 23, 2013
I have a workbook with two worksheets,
sheet 1 contains student data, name dob, actual age, raw score and an empty column standardized score
sheet 2 contains a conversion table, using the actual age from sheet one you locate the age in the top row of table in sheet 2, and using the raw score from sheet 1 you locate the matching raw score from the first column of the table in sheet 2, going down and acrosss until you meet this gives you a standardised score
i want the standardized column in sheet one to fill by using a formula which looks at the table in sheet two locates the two values and returns the result.
View 5 Replies
View Related
Jun 5, 2014
I'm trying to see if you can look up multi columns for a number and when it finds it return back to one column and return that data?
I am trying to sort out territories for a state I work on; the territories are divided up by zip codes.
i.e.
A B C D
territory 1 12345 54321 11222
territory 2 22222 33333
territory 3 44444 55555
and what I want is to say put a formula in cell B3 on Sheet 1 pointing to cell C3 that has zip code 33333. I want it to then take that and look in Sheet 2 and search A1:D3 and when it finds 33333, return "territory 2" back to cell B3 on Sheet 1.
View 3 Replies
View Related
Jul 14, 2014
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
View 2 Replies
View Related
Mar 19, 2014
I have a list of parts in a table. I am manually copy/pasting this list to another sheet in my workbook and then using DATA→Remove Duplicates to get a shortened list. Is there a way to automate this process?
In the attached workbook I want the yellow cells to auto-fill for me.
I get a lot of lists in the format on the left hand side so I want excel to automatically format them for me so that I can use the output on the right.
List Sorting Help.xlsx‎
View 1 Replies
View Related
