Compares The Numerical Value Of 2 Cells

Aug 31, 2007

I need to write a macro that compares the numerical value of 2 cells and give me a result as described below:

All the numbers would be either whole numbers or whole numbers + 0.5

Example 1:

The two values are both whole numbers then no action is taken.

Cell A = 5
Cell B = 5

or

Cell A = 7
Cell B = 5

Result = No action taken..................

View 14 Replies


ADVERTISEMENT

Function That Compares The Cells

Jun 25, 2009

this is an extract from a pivot table:
A B

N-CONTROX 18-jun 02-jul 16-jul Q-BETACICL 22-jun 01-jul

The left column is the product, the right the delivery day.

I need to Check and extract each product delivery days. For example, for Q-betacicl I should:

1.- in cell f1, use a Vlookup function to extract 22-jun. thatīs done.
2.- in cell f2, use an If function that compares the cell below Q-betacicl with the cell below. If itīs 0 (like this case) it should extract 01-jul

I used this and excel didnīt even let put the formula, arguing some error I caīt find:

=IF(OFFSET(Vlookup(E6;$A$5:$B$27;1);1;0;1;1)=0;Offset(Vlookup(e6;$A$5:$B$27;1);1;1;1;1);0)

Basically this says:

Look for a value equal to E6 (q-betacicl) in matrix A5:b27, and if the cell immediately below it = 0, copy the value to the right of that cell (the one below it).
In the case I showed, for Q-BETACICL, it should copy 01-jul. For N-CONTROX it should copy 02-jul.

View 9 Replies View Related

Macro That Compares Cells

May 17, 2006

I'm trying to write a macro that compare 2 cells. I can't figure out what is wrong with the code i have attached. It keeps giving me a fatal error.

View 6 Replies View Related

Macro To Replace IF Statement That Compares 2 Cells

Nov 21, 2007

In cell M32 there will either be an O or the cell will be blank. In cell T51 I had placed an IF statment like this:

=IF(M32="O","","X")

Now that works ok but there is a glitch on my part. If T51 is blank because of M32 containing an "O" then the user will also enter a number into T51. Because I was using an IF formula in the cell it gets overwritten because of the user needing to enter data in the cell because of M32 containing a O. How do I write a macro so that a similar formula is used but still able to enter data manually without overwritting the formula?

View 14 Replies View Related

String Compares

Jan 13, 2009

My program assigns a variable one of three values - either "Lancaster", "DeSoto" or "Cedar Hill". My string compares for Lancaster and DeSoto work fine but can't get anything happening for Cedar Hill.

I looked at the value of the variable and it appears to be correct. However, when I did a StrComp for the variable and the string "Cedar Hill", they did, of course, not come out as equal.

View 3 Replies View Related

Displaying Months From Cells As Their Text (not Numerical)

Oct 14, 2009

The formula contained within these cells equals =MONTH(C84) [the date 2 cells above it]... to which I've formatted the cell to "mmmm" and it displays "January" across the board. Can anyone explain why this is occuring and how I can fix it please? I'm aiming to graph this information and can't accurately do it using the moving monthly system i've put in place if I can't change the months dynamically like this.

Secondly, and on a side note. Line 84 currently takes todays date (not currently todays date in the example screenshot) (=TODAY()), and to get to the previous 13 months I deduct 31 days. I can foresee this as being a problem further down the track especially when leap years come into play. Is there a function in Excel where I can simply deduct 1 month from another? =MONTH(C84)-1 ?

View 2 Replies View Related

Tab On The Sheet That Looks Up Name And Compares Against A Schedule

Nov 26, 2009

I am currently trying to take a list of people who have log in times at work however if they log out then back in the result is what you see below.

What I am looking to do is match the find the name then find the earliest time (login Column C) and then the last or latest time (log out Column D)

A B C D
John Smith64676076:02 AM6:13 AM
John Smith64676077:25 AM11:27 AM
John Smith64676212:08 PM4:01 PM
John Smith64676076:13 AM7:25 AM

Would like a formula as I have another Tab on the sheet that looks up name and compares against a schedule to see if the person was late or left early.

View 9 Replies View Related

Formula That Compares 2 Ranges

Dec 15, 2009

Is there a Function or compound Formula that compares the values of two ranges and returns True/False ?

Something along the lines of : AreRangesIdentical(Range1,Range2) returning True/False.

I have played with some array formulas but they seem to compare the two first cells only.

I know one can easily come up with a UDF that loops through each cell and returns once a cell is found whose counterpart is different but i am looking for a solution that doesn't use a loop.

View 9 Replies View Related

Inserting A Numerical 1 Or 0 Into A Cell Depending On The Values Of Two Other Cells

Jul 24, 2008

I'd like help writing a single formula that assigns either a numerical 1 or 0 to a cell based on values from two other cells.

By way of background, I'm working with three columns. Cells in column F contains values from 1 to 4. Cells in column G contain values from 5 to 11. Cells in column H are currently blank.

I need a single formula that will insert either a numerical 1 or a 0 into column H according to the following conditions.If F3 = 1 and G3 = 5 or 6 or 7 then let H3=1 otherwise let H3=0
If F3 = 2 and G3 = 7 or 8 or 9 then let H3=1 otherwise let H3=0
If F3 = 3 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
If F3 = 4 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0

View 11 Replies View Related

Excel 2007 :: Dragging And Inputting Cells Into Numerical Order

Mar 25, 2014

Excel 2007. At the bottom of a column of data I'm trying to reference the cell $AG4. There are 340 total columns. Each additional column to the right needs to reference the next cell in column AG. So I'm trying to drag and copy horizontally from $AG4 to $AG340. When I try just the single column it just copies $AG4 into everything to the right. When I have to columns ($AG4 and $AG5) and grab both to try to copy horizontally the numbers increasing it just does $AG4, $AG5, $AG4, $AG5, etc.

View 2 Replies View Related

Dynamic Named Range - Select Only Cells With Numerical Values

Jul 21, 2006

Is anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?

I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.

View 9 Replies View Related

Compares 2 Lists Of 6 Digit Serial Numbers

Oct 10, 2008

I've modified this macro I found on this forum, all it does is compares 2 lists of 6 digit serial numbers and and then tells me which numbers are in list 1 that are not in list 2.

However, I want to modify it so that it also gives me the numbers in list 2 that are not in list 1 (put into column F). I then need it to cut the matching serial numbers (in columns A and B) from sheet 1 and paste them into sheet 2.

View 5 Replies View Related

Build Graph That Compares 2 Sets Of Data But Only Plots 1 Dot?

Apr 17, 2014

I would like to build a graph that compares 2 sets of data but only plots 1 dot where the two intersect. I have seen this graph made by others in Excel but I do not know what it is called or how to make it. An example data set is below.

ID Age Height (cm)
1 5 125
2 7 140
3 8 138
4 11 152

I would just like to plot the location where the age and height for the ID's cross and not 4 plots with the age and 4 plots with the height.

View 1 Replies View Related

Workbook That Compares Two Sheets Of Data By Taking The Difference Between The Two

Jun 18, 2009

I have a workbook that compares two sheets of data by taking the difference between the two. Some of the cells contain N/A for value, so when I take the difference of two sheets, it gives me #Value! error. My question is how can I format it, so when the cell contains text it displays N/A or if its a value: it takes the difference and populates the value.

View 9 Replies View Related

Status Formula (find Out The Formula Where Numerical Valued Between 1-2000 Equals True And Numerical Under 0 Equals False)

Dec 12, 2009

I'd like to find out the formula where numerical valued between 1-2000 equals True and numerical under 0 equals False. Examples are in the attachment.

View 3 Replies View Related

Formula That Compares Month Over Month Data

Mar 5, 2007

I am trying to create a formula that compares month over month data. If the prior month is 0 I get an error. I am having trouble with incorporating ISERR into the formula to eliminate the error.

=IF((C26-B26)/B26

View 9 Replies View Related

Non-numerical Histogram

May 9, 2009

I have been searching to see if it's possible to create a histogram with non-numerical data and it doesn't seem like it's possible. Is there something similar where I can. Count number of occurrences of a string and organize them from most frequent to less frequent? There are about 60 possible strings.

e.g.
ABCDEFGHIJ
1ddhykygghd
2jlqqwertya
3ukhghjklzx
4tukyuuiioa
5xypyjkkadh

Then output the counts of each of the strings (letters in this case) present. I was thinking of just putting them in the same row or column and manually counting, but it doesn't seem like it would be that difficult have it automated.

View 4 Replies View Related

Numerical: B1 Was Blank

May 16, 2009

The worksheet looks like following:

A1=350; B1= ; C1=-350

a.The forumula in C1 was =A1-B1
b. B1 was blank
c. I had to enter the formula in B1?

What formula goes on B1?

View 5 Replies View Related

Non Numerical Ranking

Feb 3, 2010

Is there an equivalent of =rank for non-numerical data? If not, is it possible to sort data (into another column if necessary) alphabetically without resorting to a macro?

View 12 Replies View Related

Find Numerical Followed By X In A String

Mar 24, 2013

find the first numerical in a text string that is immediately followed by an x

so that i can extract the packing size from packing description workbook attached

DESCRIPTION
PACKING SIZE
SUNFLOWER OIL 12X1LT
12X1LT

[Code].....

View 5 Replies View Related

Charting Non-numerical Data?

Dec 2, 2013

produce graphs/charts based on inequalities monitoring information - gender, nationality, age etc. I'm capturing info from several events, one sheet per event. Had a look at COUNTIF but not sure it's what I want and looks like I'd need sub-sheet for each? Capture.PNG

View 7 Replies View Related

Giving Letter A Numerical Value

Apr 2, 2014

I'm working on a spreadsheet and I want the letter "E" to have a numerical value of zero, and not necessarily in just place as my sheet will be regularly updated. If you're a fan of golf, you will understand what I am doing. I'm basically making a custom leader board for a fantasy golf game that I'm doing, and I'd like for the letter E to represent the value of zero when I am adding up the scores.

For example
A1: -1
A2: -3
A3: 4
A4: E
A5: -2
A6: 3
A7: 3
A8: -5
Total: -11 (have a formula set up to only count the best 4 scores).

I want to be able to add up those columns, and since only the lowest 4 scores count, I need E to equal zero. I get that I could just put 0 there, so I'm being a little picky (in golf E represents Even par, essentially a value of zero for the purposes of this game). There are 20+ teams in the game so I need E to be recognized as zero in each of those fields.

View 14 Replies View Related

Sum Formula For Non-numerical Fields

Nov 21, 2007

I have a column of dates (2007, 2006, 2005 etc...) and a column of data ranging from "unsatisfied" to "very satisfied". I want a formula to provide, for example, the total number of occurences of "very satisfied" in "2006".

View 9 Replies View Related

How To Consolidate Non-numerical Data

Dec 8, 2008

This should be easy but after searching "consolidate" all that I could find was multiple sheets and complex questions.

I have 5 data columns that I need consolidated into 1 single column. I've tried the consolidate funtion but it appears to only work with formulas and numerical values (unless I cant find the proper command.) I've also tried paste special but it populates the cells following.

I need 5 cells word values pasted into a single cell

View 12 Replies View Related

Numerical Value To Be Translated Into A Word

Aug 17, 2013

I have Cell B1 = 6 on a worksheet named DOC. On Cell B3 of worksheet Week 1 it has "Celina". Is there a way that if Cell B1 in DOC has number 6, Cell B3 on Week 1 will automatically become Celina. All worksheets are in the same workbook.Likewise if Cell B1 ever has any of the following numbers, cell B3 in Week 1 will display the corresponding alphanumeric.

1 = Troy
2 = Piqua
3 = Urbana
4 = Grnvl
6 = Celina

View 2 Replies View Related

Returning A Numerical Value From Text

Oct 25, 2013

I'm trying to streamline my spreadsheet a bit. Sometime last year I managed to use the formula found (on the attached file) in cell K4 to assign a numerical value to a lettered grade. However, it's been a year or so since I thought about it and so I've completely forgotten how to edit it to make it more appropriate for this spreadsheet!

Essentially what I'm trying to do is a workaround for what I've already done in columns E and F: I'm trying to show the difference between two grades (letters) as a numerical value. Is there a way to do this, or is the VLOOKUP work around I've used in columns E and F going to be the simplest way?

View 1 Replies View Related

Creating A Numerical Countdown

Feb 24, 2009

I need help figuring a way to show what I have left on a spreadsheet. Please see the following thread with attachments in them.

[url]

View 9 Replies View Related

Validating Numerical And Not Blank?

Mar 29, 2009

I'm attempting to require a numerical entry in a cell using data validation. The function =AND(ISNUMBER(cell),NOT(ISBLANK(cell))) does not perform as intended. Unchecking "Ignore Blank" has no effect. The ISNUMBER function evaluates to TRUE on a blank cell. When used outside of data validation, NOT(ISBLANK(cell)) evaluates to FALSE on a blank cell, making me think the AND(...) function should be sufficient.

Valid entries are any number, including 0.

Can this be done without VB?

View 8 Replies View Related

Auto Numerical Values

Jul 25, 2009

creating functions in excel and would like to hire someone who can assist me in creating the following functions: Column A (For Numerical Values Less Than or = to 100): Column B Value should be (+10)

Example 1: If a numerical value of 90 is placed in Column A then Column B Numerical Auto Value should be 80+10 (190). Example 2: If a numerical value of 35 is placed in column A then Column B Numerical Auto Value should be 35+10 (45) and so on. Another important point is that if the values in column A are copy and pasted Column B should automatically discharge the values visibly as the examples stated above is this possible? If not i'll need to have this done.

Also there are other numerical values that must be added in Column A (basically for every increase in numerical value of 100 there are to be different numerical plus factors in accordance to Column A). Column A (For Numerical Values greater than 100 but less than 200): Column B Value should be (+15).......

View 4 Replies View Related

Set Up An If Statement That Where 'a' And 'b' Are Numerical Values

Jan 25, 2010

I want to set up an if statement that does the following, where 'a' and 'b' are numerical values.

If 'a' is not a multiple of 'b' Then
...
Else
...
End If

How can I write this so VBA can understand it?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved