Concatenate Various Cells When Another Criteria Is Complied?
Jan 18, 2013
I looking for an option to concatenate various cells but only when another criteria is complied, also to sum other value. I.E. concatenate cell "A" when the value on cell "B" is repeated, also sum the value on cell C.
A1=D1 B1=num 1 C1=1
A2=D2 B2=num 1 C2=1
A3=D3 B3=num 1 C3=1
A4=D4 B4=num 2 C4=1
A5=D5 B5=num 2 C5=1
Waited result, assuming formula on the next row:
A6=D1,D2,D3 B6=Num 1 C=3
View 1 Replies
ADVERTISEMENT
Jul 22, 2014
I am looking to write a formula that can concatenate cell A$1$ (absolute) & B1: B245 (dynamic)and then A$2$- B1:B245 and then so on.
So for example, I need to concatenate cell A$1$ & B1, and then A$1$ & B2, all the way up until B245, and then I need to restart the sequence with A2 and B1.
Formula to preform this concatenation, or will this need to be done with VBA?
View 1 Replies
View Related
Aug 31, 2012
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
View 1 Replies
View Related
Aug 11, 2013
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
View 9 Replies
View Related
May 3, 2007
I created a concatenate on a co-worker's spreadsheet so I could utilize the data, and it works fine. But then I realized when reviewing the results, that there are MANY instances where not all of the fields that the concatenation pulls from contain data. I verified the source, and found out that any of these fields may or may not contain data. Now I need to account for this within my formula.
The cells being concatenated are in columns G-K, my first formula (in cell L4) is:
=IF($A4=3,CONCATENATE(G4,"; ",H4,"; ",I4,"; ",J4,"; ",K4),"")
Now I am using a "; " to separate between each cell's text. I need to adjust this formula to account for the fact that any of those cells MAY not contain data. And if it does not, I do not want the separator ("; " to show), because otherwise, I get entries that display like this:
up to 10.; ; 1.NS.1.1
If necessary, I can easily place my separator in a specific cell (M1 would be good) and access it from there rather than the way I initially wrote the formula.
View 9 Replies
View Related
Mar 13, 2008
I have data in sheet 1 and sheet 2. Sheet 1 contains a product code and line number and sheet 2 has the corresponding cost.
I want to be able to bring back the cost to sheet 1 without having to concatenate the product and line number.
I'm sure this is possible with a formula, but I am currently stumped.
I pasted the sheet 1 and sheet 2 data below. Note that the sheet 2 data extends the full row and does not wrap.....
View 9 Replies
View Related
Feb 15, 2010
Im tryng to do a SUMIF formula that has several criteria as answer but using the concatenate formula, but it doesnt seem to come back with the answer - im using AND/OR formula aswell, but have a feeling im doing it wrong.
It does work when i use the single concatenate, but not when i try a do more than one
View 4 Replies
View Related
Dec 20, 2012
I am looking for a way of creating the following conditioned concatenation.
I have two tables, let's call them "summary" and "detailed".
The "detailed" table is something like the following:
ID
VOL
001
01
001
05
[code]....
The "summary" table below gets info from the "detailed" table. The 'ID'is now unique. I'm looking for a formula on the 'VOL (concatenated)' column cells it should get all rows from the "detailed" table with the same ID and then concatenate the 'VOL' column results, comma separated:
ID (unique)
VOL (concatenated)
001
V01, V03, V05
002
V01, V04
003
V06
PS: I have people using this table with office 2003, so compatibility is necessary...
View 1 Replies
View Related
Dec 11, 2008
I'm having a rather difficult time getting this one.
I am concatenating (is that a verb?) a bunch of cells to create an item code.
The combination of two different cells need to be able to give different values so I can dump the appropriate value into the CONCATENATE formula.
A picture is worth a thousand..
View 4 Replies
View Related
Apr 11, 2013
On tab 2 of a spreadsheet, I am trying to concatenate several cells on tab one! Everything comes together in the cell on tab 2, however it does not hold the date format. It turns it into general text so just random numbers that do not even tie to the date. Any way to lock the date format for this idea?
View 7 Replies
View Related
Apr 27, 2007
I have 7 consecutive cells which contain a %
e.g. A1 120%, B1 35% etc
I am trying to put them into one cell using concatenate
but am getting 1.20.3529411764705880.705882352941177
I would also like to separate them by comma,
View 9 Replies
View Related
Apr 30, 2009
I concatenate value of the several cells at one. (A1&"/"B1&"/"&C1 and etc. The length of characters may be different and I want it be looking neat by adding spaces. Something like that:
400/ 25/ 30
40/250/300
View 5 Replies
View Related
Jun 1, 2009
I've been trying to use IF OR and CONCATENATE to read 4 cells and give me a list of parts needed based on the data loaded in the 4 cells. I attached an example showing.
View 2 Replies
View Related
Sep 29, 2009
I know how to do the "normal" type of concatenation (concatenating?), but I was wondering if there was a way to concatenate a range of cells.
If my first three cells look like this:
A1 = Adam
A2 = Bob
A3 = Chris
I'd like cell A4 to say "AdamBobChris". I'm not worried about punctuation at this point. I thought I could just do =concatenante(A1:A3), but that's not working.
View 4 Replies
View Related
Apr 23, 2014
I have a Requirement where we need to concatenate the cells based on conditions
i have the attachment for the reference . please download the file from the link.
View 1 Replies
View Related
Jan 29, 2009
I have data in cells A1:A50. I want to combine all of them into cell A51. I know that I can achieve that by using =concatenate(A1,A2,A3,A4,........,A50) or =A1&A2&A3&A4&......&A50 but it would be very tiring to click on each cell. Just imagine if the data in cells A1:A1000? function that work like say =combine(A1:A50).
View 2 Replies
View Related
Feb 6, 2009
I cant quite get this, I have 4 cells in one row (a selection and can be any row), I need to string the values together and add some simple text.
Example:
Assume row 1 and columns A, B, C, D.
496 | 6d7 | Minor | Ø.375 +/-.010
What I need this to read as one long string:
#496, 6d7, Minor, Ø.375 +/-.010
Adding the text in Red.
Column A may be a single digit or up to 10 digits in length. Once the string is configured I want to copy it and manually paste in another application. If the string is placed any where else in the worksheet for formatting, it can be deleted after the copy/paste or macro end.
View 5 Replies
View Related
Apr 14, 2014
I'm trying to concatenate a few cells but seem to be missing the mark with my code. show me where I went wrong.
Code:
Dim counter As Long
Dim b As Range
Dim e As Range
Dim g As Range
Range("E1").Select 'Set the range for the loop
Selection.End(xlDown).Select
[code]....
View 5 Replies
View Related
Jul 17, 2007
I have the following formula in cell N4:
=CONCATENATE(O4,CHAR(10),"EBC Briefing: "&TEXT(P4,"dd-mmm-yy"),CHAR(10),"Site: ",Q4)
As long as 04:Q4 are ALL non-blank cells, the formula works. However, if ANY of the cells are blank, it displays the green rectangle in N4, but it doesn't offer the Trace option.
View 9 Replies
View Related
Nov 25, 2009
I have a macro to concatenate multiple cells but unfortunately it is not giving the result,
It has to concatenate below mentioned cells and put the result in column N
Sub ConcatColumns()
Do While ActiveCell "" 'Loops until the active cell is blank.
'The "&" must have a space on both sides or it will be
'treated as a variable type of long integer.
Range("N1").Select
ActiveCell.FormulaR1C1 = _
"=CONCATENATE(RC[-10],RC[-9],RC[-8],RC[-7],RC[-6],RC[-5],RC[-1])& ActiveCell.Offset(0, 0)"
ActiveCell.Offset(1, 0).Select
Loop
End Sub
View 9 Replies
View Related
Jan 6, 2007
I have a spreadsheet of inventory items that I am trying to prepare to import into Quickbooks. There are items in this sheet that are subitems of a parent item. The subitems have the same ID number (col. C in the attached sample), different quantities and different descriptions than the parent.
I need to to concatenate the Item Lookup Code (col. D in example) and the description, separated by a colon. Then I need to copy everything else in the parent record, except quantity and description, into the child records. There are close to 20,000 items in this sheet.
View 4 Replies
View Related
Mar 22, 2007
I want agglutinate some text values in the same cell. Something like that:
A1="John"
A2="Elton"
A3="Mark"
A4="AND"
B1=A1+A2+A3 =(John Elton Mark)
B2= A1 +A4 +A2 + A4 +A3 = (John AND Elton AND Mark)
View 3 Replies
View Related
Jun 8, 2007
I am attempting to concatentate several cells (10 to be exact). I only want to include cells that are not blank in the output. I searched the topics and found a similar problem. I attempted to modify that solution to fit my needs but I obviously do not quite understand exactly how it worked. I have attached a sample. The expected results are that if in row 1
columns a through j have any value they will then be concatenated or joined in some other fashiion seperated by a comma. I only want to include non blank values. I have placed the code that I attemted to use in this post.
=IF( COUNTBLANK(GL41:GU44)=0,GL41&", "&GM41&", "&GN41&", "&GO41&", "&GP41&", "&GQ41&", "&GR41&", "&GS41&", ">41&", "&GU41,IF(ISBLANK(GU41),""&GL41,GL41&", "&GU41))
Some of these cells are merged as indicated in the range of countblank().
View 6 Replies
View Related
Mar 7, 2008
I receive multiple worksheets containing transaction data with multiple numbers of row and columns. The data columns contain varying types of information like: price, quantity, location1, location2, loading dock, transaction date, buy/sell, purchaser, seller, currency unit, etc.
I have a need to concatenate into a single cell in a blank column, data from a number of cells in each row -- sometimes two cells, sometimes more. In some instances, I'd like to concatenate data for location1 and location2 with a delimiter like a semicolon-and-a-space to create a cell with: "location1; location2" Or in another instance, I'd like to concatenate multiple cells in a row, like: "location1; price; quantity; transaction date", etc.
I'm looking to create a macro that, with the cursor in a blank cell in a blank row, would open an input box, ask a user to select with the cursor the cells in the row to concatenate and then concatenate them into the blank cell in the row.
Ideally, the macro would populate the entire blank column with the concatenated data for the group of selected cells (from the same columns as in the row where the cells to be concatenated were selected) for each row where there is data. It is also possible that some cells in some rows of the selected columns would contain no data. In that case, I'd be looking to return just the delimiter, like: "location1; ; quantity; transaction date"
Right now, with no macro, I do it by hand like this:
To concatenate into cell I6, the contents of cells A6, B6, G6 and H6, I do a "=CONCATENATE(A6,"; ",B6,"; ",G6,"; ",H6)" in blank cell I6, but I'm looking for a way to do it fast in a macro that would fill in all of Column I.
View 5 Replies
View Related
Aug 8, 2008
I am trying to concatenate multiple lines of comments into one string and place that string in the comment field corresponding to the start of each record set. I believe the code below is close, but I am receiving this error
Run-time error '91':
Object variable or with block variable not set
Debug points to this line
rngComment = . Cells(intCounter, 5)
I'm not sure what I am doing wrong.
Option Explicit.........................
View 7 Replies
View Related
Oct 6, 2007
I have a list of P/N's that are used in more then one location. and it's sorted by P/N's.
ColA__ColB__ColC
______Loc___PN
______1_____A
______2_____A
______3_____B
______4_____C
______5_____C
I Want to be able to put in Col A the concatenate results of all equal P/N's from any given list. Or at least select the few cells that i know are duplicates and from that copy the Location to a single Column.
ColA ColB__ColC
______Loc__PN
1,2____1___A
_______2___A
_______3___B
4,5____4___C
_______5___C
View 5 Replies
View Related
Sep 15, 2014
I have two columns - A and B. In column A there are blank cells and filled cells. There is a blank cell and after it - a variable number of filled cells, then a blank cell again and a variable number of filled cells. I am trying to concatenate the filled cells from column A into a single cell in column B, which is corresponding to the blank cell in column A. Values should be comma delimited.
For example: A2-blank; A3-27; A4-63; A5-blank; A6-31; A7-blank .. and in column B should be B2-27,63; B3-blank;B4-blank; B5-31,B6-blanc and etc.
View 5 Replies
View Related
Jul 28, 2014
I am trying to figure out how to Concatenate a group of cells if they contain a certain text. Basically I have a list of Architects in column A and the account name in column B... and I want to say Concatenate column A, IF column B=Specific Account (ex: Coca-Cola). The list will be added to frequently so the formula must refer to the entire columns, not just a certain range.
As of right now, only the first architect associated with each account will appear. I have attached a workbook with the example..
example.xlsx‎
View 6 Replies
View Related
Oct 14, 2009
I am trying to merge cells A1:GR1 in to one cell by using the concatenate formula and the copying and pasting the values in to the same cell.
View 4 Replies
View Related
Dec 30, 2009
How can I concatenate 2 cells address style? I'm trying to merge 2 cells into one, so that one is under the other in the same cell.
View 5 Replies
View Related
