I am wanting to paste formula from N1 till N X (X = varaiable row) where X reliant on Column A Row X. If Column A Row X has character "=====" it should paste N1 Formula all the way down till N Row X which is equal to A Row X containing "=====" .
I might be sounding complicated over here but it is a simple equation.. I have tried to approach this in the capacity i could by condition if Column A row x is blank delete the row.
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
1. In this formula in column C, below, i have A2 as the look up... sometimes this will be A3 , A7 or other... how can i vary this formula? I've tried it all ways.
Range("C2:C" & LR).SpecialCells(4).Formula = "=VLOOKUP(A2,Data!$A:$B,2)"
It need to be inserted based on the first cell in column A which has a value.
2. after this has done its thing... how can i paste the values to ONLY those cells which have been affected by the formula. I don't want to copy, paste special the whole column as there are sub total and other exciting things included.
I am trying to get a formula that is sitting in cell A2 to be pasted all the way down column A as far down as B values exist.
View 5 Replies View RelatedI need a formula to be placed in cell Col A, Row 1, that concatenates any and all cells in Col A, with a ';' separating each item. I only want this concatenation performed ONLY IF an adjacent cell in Col B contains the letter 'X.
Additionally, if the cell in Col A is null, then I the formula to ignore it, and not perform the concatenation.
Is there a way to do this formulaically?
II want to sum the values under 'amount' column only if the corresponding value under 'Balance' column is "Paid"
NameAmount Start Date End Date No.of DaysInteresetBalance
Sat1 250 1-Aug-07 20-Aug-07 19 - "paid"
Sat2 550 4-Aug-07 20-Aug-07 16 -
Sat3 250 10-Aug-07 20-Aug-07 10 - "paid"
Sat4 450 6-Aug-07 20-Aug-07 14 -
Total PAIDAMOUNT(B1:B4)
For the above, the sum value should be 500. I have written the following function to calculate the same. On uncommenting the line 'paid = CStr(paidvar)' the value is displayed as '#VALUE!'. On uncommenting all commented lines, the value is displayed as 'Paid'.
Function PAIDAMOUNT(amountRange As Range) As Variant
Dim count As Long
Dim paidvar As Variant
Dim paid As String
Application.Volatile True
PAIDAMOUNT = 0
For count = 1 To amountRange.Cells.count
paidvar = amountRange.Offset(count - 1, 7 - amountRange.Column).Value
'paid = CStr(paidvar).................
I've schedule header date 1-oct,2-oct,3-oct.....etc and have two cells Last Date and Hours I need from those cells once i add date and hours to copy the hours and paste in schedule header in the exact date..
for example
#
Last date
Last Hours
[Code]....
but was too slow takes long time.
2nd VBA code to copy last hours to schedule date based on condition on last date cell.
15.png
Attached is the file & snap shot for the problem.
TABLE A
[table="width: 500, class: grid"]
[tr]
[td]Catagories state names devices
A4-100HP A ALT
[Code] .....
TABLE B
Catagoriesstate names devices
A4-100HP
A4-101MP
A4-102AP
[Code] ....
In above condition we want to have an automatic filling up of data in table B in column (name & device) but it should match first with state name with category codes of table B & then same with table A in order to avoid any wrong entry because in table A certain states are repeated but codes are unique so we want that filter should match two column of each table before filling data in table B.
This should be simple to do but I can't figure it out. I have a database that lists operating room numbers in one column and the length of the surgeries performed in those rooms in another column.
I need a formula that will give me the longest OR time for a given room. For example the room numbers are in column A and the OR times are in Column B. I've tried something like
I have a worksheet which is created monthly by one of our company's employees which reports results for that months operations and successful audits. These audits are separated into various service lines and on the report which is submitted it takes on the following format:
1|Service Line|Data A|Data B|Etc.
2|___CR_______| Data | Data | Etc.
3|____________| Data | Data | Etc.
4|____________| Data | Data | Etc.
5|____________| Data | Data | Etc.
6|___DD_______| Data | Data | Etc.
7|____________| Data | Data | Etc.
8|___MS_______| Data | Data | Etc.
9|____________| Data | Data | Etc.
What I want to do is use a macro from another sheet that has the effect of: While ServiceLine = "CR" copy the row of that line and move it to my monthly summary workbook, sheet 1. Then when the Service line changes to DD have the macro copy that information to the monthly summary workbook sheet 2, and so on. The problem is, if I test the Service Line column each time it will be an empty string the majority of the time and I'm not sure how to combat that with my If, Do, For, and While statements. As I've thought about it there are two solutions that I can think of: someone knows of a way to test the row only if it has information in it, or if there is a way that I can copy the service line information down until the change in service line so I can test Service Line on each Row.
I have an excel sheet with 2 tabs. 1st tab provides the data for downtime of a manufacturing line. The last column (shift) is blank and needs to be filled based in shift schedule in tab2
On the 2nd tab I have the shift schedule, which tell which shift is working on particular days
Month
Date
7:00am- 7:00 pm
7:00pm - 7.00am
Feb
1
Shift A
Shift C
[Code] ........
Is it possible to write a macros that will look at the Date and time from tab 1 and assign the correct shift number in the shift column. For example the 1st row of tab 1 reads (Month=Feb, Date = 3:55:59 AM) so according to shift schedule it would fill C shift.
I have lots of data and to assign every event to shift # manually is not possible. So i wanted to know if there is a macros i can use to make life easier and learn at the same time
I have a worksheet that I want to export to a csv file. However, there are multiple rows that I want excluded in the export. These lines are recognized by the word "No" in column E. Is this possible?
View 3 Replies View Relatedi am trying to do is match 2 columns data based on a condition ie i have data in column "b" of sheet called "balance" data is variable this column has unique indentifiers i want to look at another column and match the uniques identifiers in another sheet if the cell value in column "D" = "please investigate" otherwise do nothing, the (column f) it will be looking up too is in sheet called "hi- port" so if cell value in column "d" of sheet"balace"= "please investigate" match values that are same from colum "b" of sheet "balance" to that of column (f) sheet called "hi-port"
i would like to colour only entire row of sheet called "hi-port" when the data matches to other sheet ie from columns "f " too " b". colour can be any colour
igonre my ranges they are wrong just used as example
Sub start()
Dim oWs As Worksheet
Dim oRngCheck As Range
Dim oCl As Range
Dim cCola As Range
Dim cColb As Range
Dim rngIRd As Range
Dim rngACs As Range
Dim Match As Boolean
Set rngIRd = Range("a1", Range("a65536").End(xlUp)) 'define the rang
Set rngACs = Range("b1", Range("a65536").End(xlUp)) 'define the rang
Set oWs = Worksheets("balance") 'change to suit
'starts at b2 to llow for header row.......................
I would like to Use my Excel VBA program to search each row in a csv document for a name (located in a cell ) if the name exists then I would like to delete the entire row.
Whenever I try to do the above in excel, even when I save in csv format the file formating or something gets changed and the file which has to be procesed through another program then process incorectly.
Is there a way to do what I need while retaining the formating which must obviously be changed when the file is opened in excel?
I have a formula that tests the minimum time in a column. If the time is the minimum it gets a PB (Personal Best) notation. My problem is once a season there is a competion that needs to be recorded on the worksheet however I do not want this time for this competion counted in the MIN test or to get a PB allocated. I have worked out how to ignore the PB but I cannot get the MIN test to work properly. Dates of comp are in Col B, data (times) in Col C and formula for PB's in Col D. When a cell in Col B (Dates of comp) = Region I want the MIN test to ignore the value in the adjacent cell in Col C.
View 14 Replies View Relatedproblem is in the same vain as my last thread "Formula to count MIN with condition". In the attached worksheet samples, Col B has competition dates, Col C is time/distance data, Col C (filled down) is the formula that recogises if the time/distance is a PB.
Once a season there is an event "REGION" where I want the formula to ignore the data in Col C adjacent to "REGION". The date of REGION changes every year and could be anywhere in Col B. The first attachment is what the sheet currently looks like and the second is what I want it to record, specifically D11. Even though D10 is a better distance, it would be ignored as it is REGION.
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
How would I count unique dates associated with another specific value on a worksheet?
For instance, Lets say I want to count each day a particular person makes a sale.
Example:
Sales PersonSale IDSales Date
Don 1001/6/2014
Don 1401/7/2014
Don 1601/8/2014
Jack 1011/6/2014
Jack 1021/6/2014
Mike 901/5/2014
Mike 1031/6/2014
So on another worksheet, I'd have:
Sales Person Days with Sale
Don 3
Jack 1
Mike 2
The Formula would go into the "Days with Sale" Column.
I have a form in which users will manually enter a date in Column A. I would like to create a formula in Column B which will add 4 days to the date based upon Column A. However, the 4 days should only be added to a select set of dates which I would like to specify. If the date is not found in this select set of dates, then the result in Column B should be the same date as Column A.
View 3 Replies View RelatedAttach below are 2 sample file and inside it consist of device,grouping and lb1,tb1,ab1. How do I use excel formulae based on 2 condition and set from vlookup with 2 condition file to vlookup with 2 condition 1 file like a vlookup.
View 11 Replies View RelatedFormula which will count unique values in column A based on condition in Column B which "y" .....
Show ranges as A:A instead of A1:A100 as I dont know the size of the table, it can be thousands rows .....
I need the macro that looks in to say Column H sheet1, if value ="true" then copy cells in column A, B, D, F to Sheet2.
View 2 Replies View RelatedLets say we have data in Column A, B, C and D and no row left blank. In the column A no cell left blank however in B, C, D any one cell only contain a value in that row. If B10 has any value in it then C10 and D10 are left blank (not empty). I want to segregate the data in Column A based on the value in B, C or D. So this one column data ( that is Column A) will split into three column. this segregated data to be put in E, F and G.
Wherever Column B has any value that's greater than zero content from the column A from the same row should copy to the E, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the F, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the G.
I am looking for a way of creating the following conditioned concatenation.
I have two tables, let's call them "summary" and "detailed".
The "detailed" table is something like the following:
ID
VOL
001
01
001
05
[code]....
The "summary" table below gets info from the "detailed" table. The 'ID'is now unique. I'm looking for a formula on the 'VOL (concatenated)' column cells it should get all rows from the "detailed" table with the same ID and then concatenate the 'VOL' column results, comma separated:
ID (unique)
VOL (concatenated)
001
V01, V03, V05
002
V01, V04
003
V06
PS: I have people using this table with office 2003, so compatibility is necessary...
I have an Excel Spread Sheet that lists all of the people who have been issued Keys in your workplace, so the row has multiple information columns (Name, Department, Key Code, etc). One row is titled "Left Workplace" and you can select either a Yes or a No. Based on that selction I want it to copy and paste into a different spreadsheet (Either Inactive - if "No" is selected or Active - if "Yes" is selected) What is the best way to go about this?
View 2 Replies View RelatedI've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".
View 4 Replies View RelatedI'm looking to create a small section of VBA code on Excel 2007 that looks for a specific date on a column and then pastes a value on the correct row.
I have weekly dates in columns along the top of my spreadsheet on row 3:
C3 = 07/11/08
D3 = 14/11/08
E3 = 21/11/08
etc...
The row further down the spreadsheet that I wish to use is selected by previous code and could be any row number within column B.
I need a snippet of code that searches for a particular date along row 3, and then once it finds the correct column, it pastes the value in the corresponding cell on my active row.
For example, if my active cell/row happens to be on B18, and the date I'm looking for happens to be on L3, I need to paste a value into cell L18.
I imagine there needs to be some form of HLookup, but I've no idea how to implement this in VBA code.
I've been using a macro that, among other things, will split a set of data into different sheets based on one column. For example, if I have Column A populated with numbers 1-10, each entry with a "1" in column A gets pasted into a sheet entitled "1", and so on. Some of the numbers I group together (for example, let's say I would group the 2s and 3s together).
I've been using the code below, but it seems to be very fickle. Half the time I run the macro, I get a "Run-time error 1004" and it points to the line "Sheets.Add. Name = WhtSht". Is there a different (easier) way to accomplish what I'm trying to do?
Dim rng As Range, StrtSht As String, WhtSht As String
StrtSht = ActiveSheet.Name
For Each rng In Range("A1:A" & Range("A65536").End(xlUp).Row)
WhtSht = rng.Value
If WhtSht = "21" Then WhtSht = "7"
If WhtSht = "34" Then WhtSht = "33"
If WhtSht = "36" Then WhtSht = "33"
If WhtSht = "37" Then WhtSht = "33"
If WhtSht = "56" Then WhtSht = "55"
If WhtSht = "57" Then WhtSht = "55"
If WhtSht = "76" Then WhtSht = "75"
If WhtSht = "97" Then WhtSht = "96"
If SheetExists(WhtSht) Then
Rows(rng.Row).Copy
Sheets(WhtSht).Select
Range("A" & Range("A65536").End(xlUp).Row + 1).PasteSpecial xlPasteAll
Sheets(StrtSht).Select
Else
Sheets.Add.Name = WhtSht
Sheets(StrtSht).Select
Rows(rng.Row).Copy
Sheets(WhtSht).Select
Range("A1").PasteSpecial xlPasteAll
Sheets(StrtSht).Select
End If
Next
I m finding the last used column and pasting a formula in the same row to the last column. Here is what I have used and it isn't working.:
View 5 Replies View RelatedI would like to copy and paste the values from a worksheet (HS-Detail) in a file to different tabs depending on the value in column A (Regions). I have a macro that works but it pastes the formulas and it takes quiet a while to run due to the number of records. How can I alter this to paste just the values and speed up the macro?
[Code] ......