Populate One Column Based On Condition Of Two Other Columns
Jan 17, 2014
Attached is the file & snap shot for the problem.
[table="width: 500, class: grid"]
[td]Catagories state names devices
A4-100HP A ALT
Catagoriesstate names devices
In above condition we want to have an automatic filling up of data in table B in column (name & device) but it should match first with state name with category codes of table B & then same with table A in order to avoid any wrong entry because in table A certain states are repeated but codes are unique so we want that filter should match two column of each table before filling data in table B.
Lets say we have data in Column A, B, C and D and no row left blank. In the column A no cell left blank however in B, C, D any one cell only contain a value in that row. If B10 has any value in it then C10 and D10 are left blank (not empty). I want to segregate the data in Column A based on the value in B, C or D. So this one column data ( that is Column A) will split into three column. this segregated data to be put in E, F and G.
Wherever Column B has any value that's greater than zero content from the column A from the same row should copy to the E, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the F, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the G.
I have a single registration sheet that lists names, contact information, and the class someone is in on a single sheet.
(Name, Number, Email, Class 1, Class 2)
I am hoping to automatically populate other sheets in my work book based on classes... essentially making automatically populated rosters. For example, everyone who has Math listed in either Class 1 or Class 2 would have their entire row (with contact information, etc) copied to the "Math" sheet.
I have three columns - as listed below. I need a script - That compares "result 1" and result 2. If there are data in the "result 1" column then input that into the "City" column. Else input "result 2" data (if any exist), else leave blank.
"Result 1" always has priority over over "Result 2".
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4 17, 3 17, 5 26, 4 26, 8 26, 10 26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
I am sure this is a very simple questions. I am using the below code to work on the worksheets on a workbook called "MF BANK EXPOSURE SUMMARY.xls" so far the code that I am using is:
Sub Commandbutton2() Dim iCol As Long Dim Isheet As Long Dim Item As Worksheet Set MFBANK = Workbooks("MF BANK EXPOSURE SUMMARY.xls") For Each Item In MFBANK.Worksheets With Item. Range("A1:T65536") For iCol = .Column + .Columns.Count - 1 To 1 Step -1 If IsEmpty(.Cells(65536, iCol)) And IsEmpty(.Cells(1, iCol)) Then If .Cells(65536, iCol).End(xlUp).Row = 1 Then .Columns(iCol).Delete End If
Next iCol End With Next Item
I would like to extend the code so that it works on the worksheets of two workbooks at the same time the one being the "MF BANK EXPOSURE SUMMARY.xls" and the other being "MF CP EXPOSURE SUMMARY.xls" .
I have been trying the whole day to create a formula to solve this but I just can't get it. To make it simple, let's say I have column A filled with different people names, column B filled with Level of Complexity and column C with the Activity (work task) title. This table is fed dynamically, so the number of rows can vary from 2 to 2000.
What I want to do is count how many times a single name appears related to the same complexity, so I can tell how many "simple, medium or complex" tasks each person has in their work queue.
A simple table example would be: colA colB colC Dan Complex Build House Dan Complex Build Shopping center Dan Simple Take dog to walk Jose Simple Clean desk Maria Medium Paint office roof
Then, on another cell I'd like to have a formula automatically telling me that Dan has 2 Complex tasks and 1 Simple, and so on - considering number rows is not a fixed number. What I have so far is this: =SUMPRODUCT((Data!$I$2:$I$457="Dan")*(Data!$L$2:$L$457="Complex")) But I need to tell a specific last row, and if the data worksheet gets updated with less data (say 450 rows) the formula breaks...
I am trying to find a way to populate a column based on the changes in the data of another column...
For example, I want to fill in the code column....so when the customers cost changes, I want a numeric code to populate & change. So for the first 5 lines, the code could be 21, and then when the cost changes to $37.51, want the code to change to 22.
I am wanting to paste formula from N1 till N X (X = varaiable row) where X reliant on Column A Row X. If Column A Row X has character "=====" it should paste N1 Formula all the way down till N Row X which is equal to A Row X containing "=====" .
I might be sounding complicated over here but it is a simple equation.. I have tried to approach this in the capacity i could by condition if Column A row x is blank delete the row.
I need a formula to be placed in cell Col A, Row 1, that concatenates any and all cells in Col A, with a ';' separating each item. I only want this concatenation performed ONLY IF an adjacent cell in Col B contains the letter 'X.
Additionally, if the cell in Col A is null, then I the formula to ignore it, and not perform the concatenation.
For the above, the sum value should be 500. I have written the following function to calculate the same. On uncommenting the line 'paid = CStr(paidvar)' the value is displayed as '#VALUE!'. On uncommenting all commented lines, the value is displayed as 'Paid'.
Function PAIDAMOUNT(amountRange As Range) As Variant Dim count As Long Dim paidvar As Variant Dim paid As String Application.Volatile True PAIDAMOUNT = 0 For count = 1 To amountRange.Cells.count paidvar = amountRange.Offset(count - 1, 7 - amountRange.Column).Value 'paid = CStr(paidvar).................
I've schedule header date 1-oct,2-oct,3-oct.....etc and have two cells Last Date and Hours I need from those cells once i add date and hours to copy the hours and paste in schedule header in the exact date..
for example # Last date Last Hours
but was too slow takes long time.
2nd VBA code to copy last hours to schedule date based on condition on last date cell.
I have a worksheet which is created monthly by one of our company's employees which reports results for that months operations and successful audits. These audits are separated into various service lines and on the report which is submitted it takes on the following format:
1|Service Line|Data A|Data B|Etc. 2|___CR_______| Data | Data | Etc. 3|____________| Data | Data | Etc. 4|____________| Data | Data | Etc. 5|____________| Data | Data | Etc. 6|___DD_______| Data | Data | Etc. 7|____________| Data | Data | Etc. 8|___MS_______| Data | Data | Etc. 9|____________| Data | Data | Etc.
What I want to do is use a macro from another sheet that has the effect of: While ServiceLine = "CR" copy the row of that line and move it to my monthly summary workbook, sheet 1. Then when the Service line changes to DD have the macro copy that information to the monthly summary workbook sheet 2, and so on. The problem is, if I test the Service Line column each time it will be an empty string the majority of the time and I'm not sure how to combat that with my If, Do, For, and While statements. As I've thought about it there are two solutions that I can think of: someone knows of a way to test the row only if it has information in it, or if there is a way that I can copy the service line information down until the change in service line so I can test Service Line on each Row.
I have an excel sheet with 2 tabs. 1st tab provides the data for downtime of a manufacturing line. The last column (shift) is blank and needs to be filled based in shift schedule in tab2
On the 2nd tab I have the shift schedule, which tell which shift is working on particular days
Month Date 7:00am- 7:00 pm 7:00pm - 7.00am
Feb 1 Shift A Shift C
Is it possible to write a macros that will look at the Date and time from tab 1 and assign the correct shift number in the shift column. For example the 1st row of tab 1 reads (Month=Feb, Date = 3:55:59 AM) so according to shift schedule it would fill C shift.
I have lots of data and to assign every event to shift # manually is not possible. So i wanted to know if there is a macros i can use to make life easier and learn at the same time
i am trying to do is match 2 columns data based on a condition ie i have data in column "b" of sheet called "balance" data is variable this column has unique indentifiers i want to look at another column and match the uniques identifiers in another sheet if the cell value in column "D" = "please investigate" otherwise do nothing, the (column f) it will be looking up too is in sheet called "hi- port" so if cell value in column "d" of sheet"balace"= "please investigate" match values that are same from colum "b" of sheet "balance" to that of column (f) sheet called "hi-port"
i would like to colour only entire row of sheet called "hi-port" when the data matches to other sheet ie from columns "f " too " b". colour can be any colour igonre my ranges they are wrong just used as example
Sub start() Dim oWs As Worksheet Dim oRngCheck As Range Dim oCl As Range Dim cCola As Range Dim cColb As Range Dim rngIRd As Range Dim rngACs As Range Dim Match As Boolean Set rngIRd = Range("a1", Range("a65536").End(xlUp)) 'define the rang Set rngACs = Range("b1", Range("a65536").End(xlUp)) 'define the rang Set oWs = Worksheets("balance") 'change to suit 'starts at b2 to llow for header row.......................
I would like to Use my Excel VBA program to search each row in a csv document for a name (located in a cell ) if the name exists then I would like to delete the entire row.
Whenever I try to do the above in excel, even when I save in csv format the file formating or something gets changed and the file which has to be procesed through another program then process incorectly.
Is there a way to do what I need while retaining the formating which must obviously be changed when the file is opened in excel?
Attach below are 2 sample file and inside it consist of device,grouping and lb1,tb1,ab1. How do I use excel formulae based on 2 condition and set from vlookup with 2 condition file to vlookup with 2 condition 1 file like a vlookup.
I am trying to populate a blank sheet with data from multiple sheets given a certain condition.
Scenario: I have multiple columns on each sheet, but only three of interest to me. The first column has a header "Part ID", the second column header is "Description", the third column header is "QTY". I want to pull the data from all three columns to the new sheet when the QTY for that column IS NOT 0. The three columns of interest are always in Column A, B, and C.
The only thing that may make it tricky is that the data doesn't necessarily start on the first row of each sheet. For example, the headers for the first sheet are on row 17, and the headers for the second sheet are on row 5. So on and so forth...
I'm not sure if this is the correct way to display my sample data, but here it is (how to change it. I looked in the guidelines, but I can't download anything onto this computer, so I can't get the HTML maker)
A B C D E F G H I
1 Descriptor Group Identifier Inventory Total Vaue Invetory Type
Group Total Incomplete Inventory Value
Here is what I would like in:
The sum of the total value of half finished and unfinished inventory for each group.
So, for group one, it would be 145. For group two if would be 38, and group three would be 316. (displayed in column I)
I think an array formula would do this, but I'm not really sure how this would work.