How do I select certain columns for duplicate values? When I go to conditional formatting>highlight cells rules>duplicate values it checks the whole sheet which is 20 columns by 50000 rows and freezes the PC. I just want to select certain columns for duplicates, like C and AC.
View 9 RepliesI need a conditional format that highlights duplicate values in different color. For example 221 and 133 are duplicate values in a range, but I want them to not show only in red. I want duplicate values in the range to show in an individual color.
I have an idea of running a macro that counts all the duplicates, paste them in a separate sheet where only the duplicated values will show, then have a regular conditional format of "Equal to".
I'm looking for a Conditional Formatting formula that will check two columns before highlighting the duplicate rows. I need it to be conditional formatting because I know nothing about writing macros or vba (what-ever that is?). Data is entered into Columns A, B, and C. I need to check both column A and C before it highlights the duplicates, based on those two columns. (The format only unique or duplicate values checks only one column.) I have attached an example, but this is just an example, as I have hundreds of lines to go through on the original. (For this example, Row 2 and Row 7 are the duplicates I need highlighted.)
View 3 Replies View RelatedI'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F:
6
6
14
Column L:
3
NA
17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
I Have 2 columns I want the left column to match the right column if there's any matching it will color yellow using conditional formatting in the left column. I tried left column=right (a:a) but it gives error .
Here the example
Left` Right
508130436508130436
569410115569410116
506141684506141685
507246387507246386
503829286508130436
559789017559789018
558960097558960090
559655269503829286
503790024503790024
559655268559655269
559655270503790024
561993273561993271
503790024561993271
503829286561993271
How can we find or highlight the duplicate value in two different sheets using conditional formatting.
View 3 Replies View Relatedformatiing a cell, e.g. change color to RED, in the event the value is a duplicate. To make it clear, I need to show that if the Serial Number of a product just entered is a duplicate and should change color when a combination of conditions is true. i.e. if a "part number" AND the currently entered "serial number" already exist, the entered serial numbers should change color.
View 3 Replies View RelatedAs per my attached file : duplicate value.xlsx
How to highlight duplicate value by using Conditional Formatting in office 2010.
Actually i Know how to use this feature in sheet "example" of my attachment.
But i want to highlight inv# 457878268 in cell E9 of sheet "My requirement" if it is exist above in cell E2 to E6.
Have a spreadsheet using the following conditional format to color highlight every other row: =MOD(ROW(),2)=1. Is there a way to apply this conditional format to all columns A through AR and all rows 1 through 24000 only?
View 3 Replies View RelatedI have this problem I have 4 columns which contain data. The first column is a list which contains random values from the third column. Now what i want to do is to pull the duplicate values from the second list without agitating the data from the 4th column because it is corresponding.In the example i have attached i would like to take the values from column A and find them in column F then extract them together with corresponding value from column G
View 9 Replies View RelatedI got 2 excel pivot tables with 2 columns.
Table 1 (Sheet 1) -- Column A and B - input
3
45
4
12
[Code].....
I want to compare both tables, finding the same Number on Column 1 for each table, and sum the values of column 2.
I wish to have one conditional format apply to K and L. Presently it's L only where it works.
=OR(K1="",AND(K1="No",L1<>""),AND(K1="OJ",L1=""))
Why when I change the range from =$L:$L to =$K:$L does it not apply to both?
I have a conditional formatting issue, using VBA.
My conditional formatting code works fine for one column; however, when I try to apply the conditional formatting to two columns, the code only applies to the first column listed. Additionally, I have two sets of "rules" that apply to the same column. One of the "rules" includes two columns. The other rule applies to only one column. I'm not sure if this is my issue, or whether I'm trying to apply the same code to two different columns.
My code is below.
Code that applies to column "M" only...
I have ammended the colours to 4 colours that I need for a risk assessment tool . I have added a second worksheet and put a dummy sample of my table there. Can you help me with how to put two colums of conditional formatting in the sheet? The risk rating before and that after the risk treatment? Many thanks in anticipation. I have highlighted in yellow the columns where the product of the consequence and likelihood is likely to be and this is where the colour coding needs to be applied. if you can help with putting the solution in the spread sheet that would be a great help. Any reply via this forum or via my email would be greatly appreciated.
I am new and I hope I have not made a mistake in starting a new thread. Sorry if I have but I wanted to bring this up as a new post so I get a sooner response.
Is it possible to use conditional formatting to set all the unused columns (S - ZZ) interior color to gray?
View 5 Replies View RelatedI need a User Defined Function (UDF) to Vlookup duplicate values in separate Columns.
I can't use an Array function as the data is huge and it takes lot of time to calculate.
I have attached a Input and the desired output in the file attached.
UDF_MACRO.xlsx
I have an excel worksheet which is having duplicate values in multiple columns, i want to remove those duplicates and should return unique values... how can i do that... My Excel Sheet looks below....
View 3 Replies View RelatedI am not sure if Excel is able to do this but basically I am looking to find out which rows have some duplicate values. I have just read this back and it doesn't make a great deal of sense so I have attached an example spreadsheet.
Basically I am looking to find if E1:G1 duplicates further on down the list, hope this makes a bit more sense with the example attached.
Trial Upload.xlsx
I'm using the code below to remove duplicate values from a column of cells, in this case column B.
[Code] ..........
The code works fine, but I'd now like to adapt this so I can remove the duplicates from columns B, C, D and F.
I've tried over the last few days different methods but recieve 'Debug' errors.
I just want to colour duplicate values but want to do it with this Dictionary method
Code:
Sub highlight_Dups()
Dim cell As Range
Dim rng As Range
Dim dict As Dictionary
[Code]....
I have a challenge related to a excel sheet we are using for personnel planning.
Vertically we have several projects with action items listed row by row in the following format:
- Project 1 xxxxxx
Project management
Project Engineering
Workshop
Shipping
Etc.
- Project 2 xxxxxx
Project management
Project Engineering
Workshop
Shipping
Etc.
Horisontaly on the columns we have dates, day by day for a year +
For each day we chose from a drop down who is assigned to the action item. The problem is when there are 30-40 + projects and each have 20-30 lines of ation items it is hard to get the overview and avoid double entry. I would use conditional formating to do this, but firstly each project is separated by a line containing different formulas and I would not like the conditional formation to change these cells, and at the same time to put this up manually for each row would take a long time since there are 365 + rows.
how a VBA code could solve this little challenge? IT would also be beneficial to have it do the check upon cell change, that way we would not need to manually run the VBA to check.
For my job I have to take hundreds of codes and compare them to other codes. For example, in column A I'll have 453 codes, in column B I'll have 352 and in column 97. I want to find common codes for all three columns. Sometimes, I'll have just two columns and sometimes it's multiple columns. I have tried a few formulas but nothing works that well. Any formulas or MACRO
View 6 Replies View RelatedI have what I think is a pretty complicated issue. At my job, we have a running and constantly changing list of jobs that we have to work on throughout the day. The job management system is really unwieldy and it’s often hard to tell what exactly we have to do today and what can wait until tomorrow. So a few times a day, I export the list to an excel doc, which I’m trying to set up with conditional formatting to highlight as green the stuff for today, ghost back what can wait, and leave white and blank the cells that don’t have any info in them. I but the attachment system wasn't working for me, so I can't provide the example I've been working on.
So far, I’ve managed to set up a formula in the conditional formatting that takes into account column C, but I need to take into account information in columns B, C, and D to determine if the job line should be highlighted or dimmed. Column B is the job's title and it is just text, column C is the Begin date, and column D is the due date. here’s what I need the conditional formatting to do.
If the begin date in column C is Today at 9:00am or earlier, and the due date in column D is today, I need to highlight the column. I managed to figure out the first part of this formula, but don’t know how to keep the line from hilighting if the due date is tomorrow: =$C2<=TODAY()+TIME(9,0,0)
The second part is that I need to hilight jobs that begin and are due today (have today’s date in columns C and D), regardless of what time they have if the task title in column B starts with “Rework Request from PS” or “Rework Request from QA"
Ideally, I’d like to change the text color to something nearly white to sort of hide the jobs that don’t need to be done today, and I figured that part out based on the formula I did manage: =$C2>=TODAY()+TIME(9,0,1)
apply this to the whole sheet so I can paste the report into it a few times a day without having to rewrite the formulas in a new sheet every time, and the number of items does change throughout the day. However when I do, the empty cells turn green as if they’re due today, and I can’t figure out how make them stay blank.
Im having a little trouble with this, Im dealing with a list, and I need to change the colour of rows, based upon a value in 2 different columns.
Im close, but cant quite get it.
Basically its like this, the data in these cells will only ever be either; blank in one or the other, both are never blank. or a number up to about 3 or 4, usually 1 or 2.
I'd like to compare two columns of data and highlight where a value doesn't occurr in both columns. The problem I have is that one of the columns uses * around the text to ensure it catches all variations of the value.
I have the following formula which would work if the data was exactly the same.
=COUNTIF(lst2,value)=0
However, these *'s are meaning it never works.
Is there a way to make it so that if the values with the *'s are not found in the 1st column of data, conditional formatting is activated?
I have data in cells A2 - N2 and cell O2 is currently blank. I am trying to set conditional formatting where if O2 has a value entered into it, it will conditional format A2 - N2 and highlight the entire row red.
I tried a formula like =O2"" but that does not work. Also tried a few other things but no luck.
Also, once the formula is set, what is the best way to apply the conditional formatting to rows 3 - 30. I tried the format painter tool but that seems to want to extend the formatting range from rows 3-30 and not just per row.
Well I spent some time yesterday trying to figure this one out. It was only last week that I have taught myself how to use VBA in excel. However this looks like a though one.
Simply what i would like to do is highlight a column of a certain date (till a certain row number) based on a list of dates.
eg. Across the top I have a set of dates and on another sheet i have a list of dates.
I understand that there is a VBA code for such conditional formatting but i can't get my head around it.
Im using access 2003 and the conditional formatting is only limited to 3. But i wanted 5. I was told it can be done using VBA. But I've got no programming experience whatsover.
Basically this is what i want, but i dont know how to translate this VB
IF Cell Value = >1 then make the value "Bold", "Bordered", and "Fill" with Orange colour.
IF Cell Value = "H" then make the text "Bold", Bordered, and "Fill" with Green colour.
IF Cell Value = "S" then make the text "Bold", Bordered, and "Fill" with Yellow colour
IF Cell Value = "A" then make the text "Bold", Bordered, and "Fill" with Blue colour
IF Cell Value = "U" then make the text "Bold", Bordered, and "Fill" with Red Colour
i would like to paste multiple duplicate values from unique values. Is there any way to do it in excel??
Ex:
Table 1:
3MG_HUMAN453
3MG_HUMAN44
3MG_HUMAN953
A1AT_HUMAN285
A1AT_HUMAN76
A1AT_HUMAN234
A1AT_HUMAN653
A1CF_HUMAN96
A1CF_HUMAN23
A1CF_HUMAN765
A4_HUMAN 944
A4_HUMAN 23
A4_HUMAN 755
Unique table
3MG_HUMAN100
A1AT_HUMAN78.89
A1CF_HUMAN90
A4_HUMAN 98
I wanted to add new column with these values for table 1 including duplicates. this is sample data and i wanted to replace thousands of this type.
I am trying to do a SUMIFS from a chart with duplicate values in rows and columns.
Data looks like this:
So this is basically sales of different products (columns) on different routes (Rows).
I want to add up a total for all the same kind of products eg. Magnum for each route eg. Local Top End.