I have a spreadsheet which uses conditional formatting to highlight cells with certain values. It's works perfectly, except for a single cell. The formatting formula is and should be exactly the same as other cells in the sheet. For whatever reason, this cell will not change with the formatting rules. The cell is not protected, it doesn't have any oddball values or anything that I can see.
View 3 RepliesI have a series of columns (L - X) each representing a diagnosed disorder (Dx), coded as binary, with 1=Positive Diagnosis (Success). The reference cell contains diagnostic codes; for each respective Dx column I need a 1 or 0, obviously. Each Dx category has a range of values (Dx codes), so I need to write syntax that reflects this range. For example, =IF(A1=>141,AND(A1=<239.99)),"1","0")
In other words, if cell value is 141 through 239.99 then return 1, else 0
Would it be something like this:
=IF(AND(A1=>141,OR(A1=<239.99)),"1","0")
Excel 2003
On one of our computers at work, Excel is acting especially strange. The conditional formatting in Excel on one of our computers is not working. In addition, we cannot fill a cell with any color or change the color of the writing. We can click a color for the letters and type it in, but immediately after another cell is highlighted, the writing goes black again. When we try to highlight multiple cells with the cursor, the cells are black instead of the normal color. This happens to not just spreadsheets that are new, but existing spreadsheets on our shared drive from only this one computer as well. No other computers are affected this way. All other computers show the spreadsheets fine and do not have any functionality issues.
I am trying to apply icon conditional formatting in a cell. The cell contains the following formula: =VLOOKUP(D20,'owssvr(1)'!O:W,9,FALSE The formula results in a "2", "1", "0" or "-1" in the cell. The icon conditional formatting is not working at all (no icon appears). I have the conditional formatting setup as numbers Green 2, Yellow 1,0 etc based on value. If I delete the formula and just type in any of those numbers directly, it works. I have changed my cells to "number" and it still does not work.
View 3 Replies View RelatedI have a spreadsheet that i am tracking some Training dates on. i have the requirements written in the box categorgy on the attachement if anyone wants to see it. Ok so so far in the B colum (contains date of a computer based training (CBT))i have this conditional formatting: Formats for Red background
View 2 Replies View RelatedIf a1=today and b1=null then colour of cell should be green, or If a1=today and b1between today and +7days then colour of cell should be yellow
If a1=today and b1 between today and +14 days then colour of cell should be green
I am trying to do this in conditional formatting, but it doesnt work. As when we try copy to all cells the ref is still for B1 so it wont work on a spreadhseet with many data rows.
I have set up a basic sheet for a colleague, whereby the Team Leader can enter client names into a control sheet, and then the team can add the client names into the allocations sheet when they take on the care for that client, and Conditional Formatting colour codes the cells to show which program a client comes under.
My problem is, the conditional formatting works perfectly on my computer, and another colleague's computer, but for two other colleagues, only half of the colour coding works... leaving half of the clients cells white, indicating they are not allocated to a program.
I have checked that we are all using the same network pathway, macro security settings etc.
I have a spreadsheet that has values in the end column that read Addition, Deletion or No Change. I am trying to get the row cells in Column A to shade red, green or yellow depending on the value of the cells in Column I. I have tried the folllowing:
="IF(I4=No Change)"
I chose the fill to be green for this but when I click OK nothing happens but I do not get any error messages.
I am trying to do a conditional formatting for the number of working days. What I am trying to do is:
Example:
As in the row D7 I give the actual workdays required to finish the task the Gantt Chart gets a specific formatting on the right appears for the number of working days.
Problem:
I want to avoid the formatting if there are any weekend (Saturday or sunday)
Suppose I give number of working days as 20 then there would be 6 weekend days so it shall add to the overall actual working days but again sinnce we are adding 6 additional days one more weekend day would come in between so the formatting shall take care of this.
I have a large spreadsheet in which I have reached the limit for conditional formatting. (i.e. 2050 rows)
To resolve this I can add a single expression for conditional formatting across all cells. This means I need to create a more complex expression.
I effectively have two types of conditional formatting that are very similar. I have the standard Yes, No & A/L which I wand to shade accordingly. I then have alternating columns of Yes , No , A/L . I have introduced spaces to stop these values from being counted by another formula but still display yes and no. I want the shading to be the same in both cases.
I have built the following expression which does not seem to work.
=ISNUMBER(SEARCH("Yes",(ADDRESS(ROW(),COLUMN()))))
The two components of the expression work separately:
=ISNUMBER(SEARCH("Yes",P3))
=ADDRESS(ROW()-1,COLUMN())
I have a conditional formula that highlights dates red when it meets a certain criteria. The file named MS Working, the conditional formatting formula (formula below) works as it should with no issues. The other file MS NOT Working, the conditional formatting formula (formula below) has stopped working as it should. What I did? I inserted a new column to the left. Where the MS Working file has only 1 column to the far left, the MS NOT Working file now has 2 columns to the far left.
It seems as if the formula adjusted itself when I inserted the new column; however, its not working.
MS Working
Conditional Formula: =AND(TODAY()>B3,NOT(ISODD(COLUMN())),B3<>"",OR(C3="",C3=0),B3<>0)
MS NOT Working
Conditional Formula: =AND(TODAY()>C3,NOT(ISODD(COLUMN())),C3<>"",OR(D3="",D3=0),C3<>0)
I have created a spreadsheet that will show me where people are working on what day, etc. however i want to be able to filter by week to create a list of say 2 particuar shifts - in this case "syl ld" and syl n so that the spreadheet would show the people who are working these shifts and I could print out. I have tried Multiple Filters and Advanced search but cannot achieve what I require
View 3 Replies View RelatedIs it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I would like to format cells with a currency based on a value selected at the top of my worksheet. Cell C3 is a drop down of currencies. And I would like cells range E11:E200 to format in whatever currency selected in cell C3.
View 9 Replies View RelatedThis has been kicking my can all morning! Should be simple. I'm trying to conditionally format an array from the value of a single cell.
=IF(A1<80, A3:A24,RED,0)
=IF(A1>80,A3:A24,GREEN,0)
=IF(A1>120,A3:A24,BLUE,0)
Need to write a code that gives a whole (from column B to column S) row a bold upper-boundary if that row has a value in column B?
View 2 Replies View RelatedI am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
A1 is not in any pattern colour. But if A1 is changed into, say, Red, B1 will be equils to D5+F5. Otherwise if A1 is changed into Blue, B1 will be equils to D6+F6. Can it been done by Excel 2003?
View 2 Replies View RelatedI have a conditional format in Cell J3 that has 2 conditions as follows:
Condition 1: Cell Value, Equal to, ="NO", and then the format will color the cell RED.
Condition 2: Cell Value, Equal to, ="YES", and then the format will color the cell GREEN.
I want Condition 3 to turn the cell J3 YELLOW if there is ANYTHING at all or anything above "0" typed into Cell D3.
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View RelatedI have a formula as follows:- B20 is the cell I wish to format. The formular is =B18-400. My problem is I wish to hide the -400 from the cell until it changes.
View 5 Replies View RelatedIf the value in column AE falls below 100 it needs to turn yellow. If the value drops below 50 it needs to turn red.
But if the figure in column AB is 0 then i dont want it to do anything at all.
how to highlight a particular cell red if the value in one cell is less than or equal to the value in another cell. For instance, How do I make it so that the "Hours to go" cell turns red if the value in the "Actual Last Completion" value is less than or equal to the value of "Last Completed" cell?
View 3 Replies View Relatedi want to calculate percentage between A and B and highlight top 10 values in B.
as of now i am calculating % in C and applied conditional formatting in C. filtering C based on color i am formatting B manually.
is there any option to avoid this manual work.
Total countAlarm reported%
562545%
783545%
322578%
In Excel, I want to do conditional formatting on a cell based on the value of another cell. For example: in cell A1, I have text. I want this cell to have a grey background if the value of cell B1 is less than or equal to 1/31/14 and to have no fill (default) if it is greater than that date.
View 8 Replies View RelatedIn the attached, I want cells to be highlighted red if they're NOT EQUAL to 0. Why is this conditional formatting not working (i.e. the cell is being highlighted)?
Conditional Formatting Example.xlsx
I am working in a table where I would like the whole row to highlight based on the value in one of the cells. These rows of data will be updated regularly, so the formatting has to change with the data.
View 13 Replies View RelatedThis seems way too simple to do yet I can't get it right. It will highlight some that are different and not highlight others that are different. I need to compare column A to O and highlight differences, B to P and highlight difference, and so on.
View 2 Replies View RelatedIs it possible to use conditional formatting on a cell if it contains comments.
View 2 Replies View RelatedI am using the following formula on a conditional formatting to color cell A1 based on cell N5 date =$N5=TODAY()-2
The problem is that I need this formula to consider only weekdays, how can apply formula weekdays to my formula?