I would like to format cells with a currency based on a value selected at the top of my worksheet. Cell C3 is a drop down of currencies. And I would like cells range E11:E200 to format in whatever currency selected in cell C3.
View 9 RepliesI'm looking to take some data from a selection of about 5 or 6 cells in a row, and use them for some formulas. I can only get as far as selecting the 5 cells.
If I have a row of 5 cells selected, how to I save each cell as a different variable? Does this make sense?
Cell 1 = number1
Cell 2 = number 2
etc..
I want to select them as a row to keep them all in one group. I don't know if this is correct or not.
I have a cell in my spreadsheet that I use to control the size of a column. I formatted the cell as a number and added data validation to make sure the number is greater than zero. Then I realized that I need to also allow for the option of auto sizing the column as well. This would require a data validation list type with something like True and False for the choices.
What I want to be able to do is have it both ways. I want a drop down list in that cell with the options Auto Size or Custom. If Auto Size is selected the cell value gets set to that. If Custom is selected I then want to be able to type in a number.
ddl.png
[URL]
Is there a way to setup a cell such that the value is either an item from the drop down list or, entered directly (depending on the list selection)?
I know I can do it with dependent lists but that would require two cells, one for the auto size mode (true/false) and the other for manual width value.
I'm having major issues getting this to work correctly. Is there a way in VBA to code conditional formatting so the entire row of a range's color is changed if the condition is met? I have about 7 different colors I'm using, but if I use the following code (only partial is shown below), it only changes the specific cell (in my case, in column A), and I want the entire row (say, A4-AI4) to change colors, dependent upon what is in cell A4.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Set MyPage = Range("$A$4:$AI$33")
For Each cell In MyPage
If cell.Value = "LH_SAS_1603" Then
Selection.FormatConditions(1).Interior.ColorIndex = 40
End If
If cell.Value = "LH_SAT_1603" Then
cell.Interior.ColorIndex = 37
End If
If cell.Value = "MH2" Then
cell.Interior.ColorIndex = 39
End If
Next
End Sub
I also tried the following, but it never stops looping through since I obvi didn't code it correctly:
Range("A4:AI33").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=$A$4=$A$37"
Selection.FormatConditions(1).Interior.ColorIndex = 37
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=$A$4=$A$39"
Selection.FormatConditions(2).Interior.ColorIndex = 40
Range("A37").Select
End Sub
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
I have a spreadsheet which uses conditional formatting to highlight cells with certain values. It's works perfectly, except for a single cell. The formatting formula is and should be exactly the same as other cells in the sheet. For whatever reason, this cell will not change with the formatting rules. The cell is not protected, it doesn't have any oddball values or anything that I can see.
View 3 Replies View RelatedI have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies View RelatedI have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
I have a series of columns (L - X) each representing a diagnosed disorder (Dx), coded as binary, with 1=Positive Diagnosis (Success). The reference cell contains diagnostic codes; for each respective Dx column I need a 1 or 0, obviously. Each Dx category has a range of values (Dx codes), so I need to write syntax that reflects this range. For example, =IF(A1=>141,AND(A1=<239.99)),"1","0")
In other words, if cell value is 141 through 239.99 then return 1, else 0
Would it be something like this:
=IF(AND(A1=>141,OR(A1=<239.99)),"1","0")
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View RelatedI am trying to alert our purchasing mgr when order dates are approaching or not meeting our project deadline.
As of now i have the following rulesif order date is due today or past due - redif order date it greater than project date - redif order date is due within 2wks - yellow
Now all I need is a rule where there is an order without a due date but the project deadline is within 2wks (yellow) and past due or due today (red)
KO_04.01.14.xlsx
I have a macro that's supposed to see if cell 5 meets criteria and continue to all sheets in workbook, except " Total".
When I activate the macro on a specific page, it runs smoothly on that page. But when it's finished, it doesn't continue to the next sheet in the workbook.
Sub ColourBG()
Dim ws As Worksheet
Dim line As Integer
endline = Range("A1000").End(xlUp).Row
For Each ws In Worksheets
If ws.Name <> "Total" Then
With ws
For line = 3 To endline
Application. ScreenUpdating = False
If (Cells(line, 5).Value = "0206") Then _
Cells(line, 1).EntireRow.Font.ColorIndex = 5 '*(Blue)
Next line
Application.ScreenUpdating = True
End With
End If
Next ws
End Sub
I've tried to do conditional formatting for each of the "Discipline" values in this spreadsheet but it is restricted to only 3. Is there a way around this? I'm trying to setup a color code for the "Discipline" values for example RN=Red, LPN=Blue, Social Worker=Orange, Chaplain=Purple, STNA=Yellow, Volunteer=Pink & Other=Green. So when the "Discipline" cell/cells on each of the patient sheets (ie. "Doe, Jane", "Doe, John", etc.) is equal to say RN the cell would then turn Red either on the spreadsheet or only when sheet is printed.
View 5 Replies View RelatedI have two listboxes where I can move tickers from left to right. This is synced with a sheet, such that the tickers also are pasted there too.
But if I use the remove button, I can remove tickers from the listbox, but I cannet delete them from the sheet. If I understand right the listbox only refer to what row the selected is, not what the text is...
And then its a bit tricky. I have tried a code where it just add the list one more time, after the itmes has been removed. And that could work if it hadn't been for the second column which also has a text, this column is updated after every ticker has been moved from left to right.
What I would like to have is a function that would know what the text in the row that I delete, or remove.
This is what I have so far:
Code:
Private Sub cmdMoveToLeft_Click()
Dim i As Integer, j As Integer, k As Integer
Dim RowsStart As Integer
Dim LastRow As Long
Dim Rows As Integer
RowsStart = Me.ListBoxX.ListCount
[Code] .......
If I have a pick list, or drop-down list, in cell B21 and one of the options in that list is "Clear", how can I get the contents of cell C21 to be cleared when I select the "Clear" option in B21?
Constraint... Don't want to use VBA.
I am thinking of hiding a formula somewhere other than in C21 that evaluates B21 and does an If Then kind of deal to clear C21.
I found many examples on this forum of how one can pull in data from closed workbooks, or copy it and have it stored in the active sheet. So far so good, but I need a solution which would do the opposite - I need the macro to take a range of data form the active sheet store it in a closed workbook and save any changes in the target workbook without opening it.
View 2 Replies View RelatedWhen I enter a value for 'Number of Steps' from a drop down a table is generated with the x values changing accordingly.
For example:
Number of Steps 5
x x^2
------------
0 0
1 1
2 4
3 9
4 16
Number of Steps 9
x x^2
------------
0 0
0.5 0.25
1 1
1.5 2.25
2 4
2.5 6.25
3 9
3.5 12.25
4 16
You will notice that the number of steps is the number of x values that take us up to 4. The 4 is fixed. I would be able to work out the maths myself as I am a maths teacher but I was wondering how I could autopopulate the table based on a drop down box selection. If it involves going into VBA then don't worry my son needs to get to grips with what I have done.
Edit. The formatting does not seem to work above. On the left of each table is supposed to be the x value and on the right is x^2.
Need to write a code that gives a whole (from column B to column S) row a bold upper-boundary if that row has a value in column B?
View 2 Replies View Relatedthis formula =H5*I5*J5/144*G5 in "M5" gives me board feet. I have another cell, "K5", with the species of wood in it using data validation and a species list. How can I format the color of "M5" based the value of "K5"?
View 9 Replies View RelatedIs there a way to build a drop down into a chart so that the user can select which items they want to view on a chart? Attached is a sample file below. Just wondering if there is a way to allow users to select to view all items in the chart or to select just a few at a time to compare and contrast.
View 4 Replies View Related1. A1 needs to turn red if a value greater than $2,000 is inserted.
2. A1 will turn back to white if either "John Doe" or "Jane Doe" is inserted in B1.
3. If no value is inserted in A1, A1 needs to remain white.
4. I'll need to do the same for A2-B2, and so on.
That's it. I tried this in C1: =IF(AND(A1>2000,B1="JANE DOE"),1,IF(AND(A1>2000,B1="JOHN DOE"),1,0)).
I then used Conditional Formatting in A1 to point to C1 and turn the red in A1 off or on based on the result. Hey, it worked! Problem is, A1 needs to stay white until a value is entered, and no value entered returns 0 (red), which oddly enough is exactly what I'm telling it to do. Surprise! How do I get A1 to default to white until a value is entered in A1?
I have a dynamic drop down list using OFFSET and want to change a selection of cell colors based on the drop down selection. My drop down list is located in cell G4 and the cells I want to change are
=$C$9,$C$10,$C$11,$B$11,$B$12,$C$12,$B$13,$C$13,$C$14,$C$15,$H$15,$H$14,$H$13.
These are random cells. There is no value in the cells, I just want to change the color from green to gray.
I am working on a macro and this section has me stumped. The worksheet columns are A:AE. Occasionally, the procedure needs to select a varying number of cells in a row which don't always fall in the same column, count the number of cells in the selection and then paste the data on the row above it, in column ("AE" minus the Selection Count).
Here is what I have so far:
[Code] .....
The red-bold bracketed code is the syntax I'm not able to figure out how to phrase.
open attached file: For example, if I click "show matching lists" button and select from combobox st8 / b1 / b4. I need in cell K2: 3472.9 and in cell L2: 3472.9.
View 2 Replies View RelatedI have the months in a drop down menu January to December in cell B1.
Is there a way for excel to display the dates in that particular month based on the selection in cell B1?
For example, if I were to select "February", I'd like Excel to display:
02/01/2012
02/02/2012
...
02/29/2012
in cells A5 through last day of the month?
A project I am working on calls for me to implement a macro that will clear the contents of a cell (but not affect the validation list it contains) based on the selection of another cell or cells. So on the simplified attached example, I need to achieve the following;
On the fist row of options, if cell "C3" is selected, then the contents in cell "D3" are cleared. If cell "B3" is selected then the contents in cells "C3" AND "D3" are both cleared. Similar is needed for the second row of options;
If Cell "C6" is selected, then the contents in cell "D6" are cleared. If cell "B6" is selected then the contents in cells "C6" AND "D6" are both cleared. Finally, if cell "A3" is selected, then ALL of the above cells' (B3-D3 & B6-D6) contents must be cleared.
I have a worksheet with 14 columns. Column 12 is either blank or when I finish that project, from a drop down menu I pick Yes. What I am hoping for is that as soon as I hit yes the line will be cut from the first sheet labeled Open and pasted to the next available row on the second sheet labed Closed. On the first sheet that blank row is eliminated so there are no spaces and on sheet two it always looks for the next available row as to not over write any data.
Also, to make sure I am doing this right too, I would right click the tab then click view code, paste it into the window (below the drop down that says (General) click file save workbook then file close and return to excel correct? One last thing, while looking at this page it shows my worksheet I call Open is really sheet 16 and closed is really sheet 17.
In my business I deal with a ton of different dimensions for my products. A lot of times the dimension will be within the cell as follows, "Product A 17x27 Brown", is in a single cell.
Is it even possible to write a code or formula that will find the "17x27" in the description, recognize it as a "dimension" and then run the formula that I need which is
I know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
More details: ....
I have a list similar to the below:
#....|Name.... | Weighting %
1Artur Boruc 1
2Igor Tudor 5
3Alessandro Grandoni 3
4Gian Elia Amoretti 3
5Olivier Kapo 12
6Kim Källström 13
7Emiliano Bigica 13
8Julio Baldivieso 12
9Fabrizio Miccoli 13
10Peter Vougt 14
11Massimiliano Esposito 12
What I want to do is randomly select either number 1 to 11 (leftmost column OR the person it represents) but also make the selection based on the percentages in the rightmost column. To illustrate using the above example, Number 11 (Massimiliano Esposito) should have 12 times more chance of being randomly selected than Number 1 (Artur Boruc)...
I have used a formula such as
PHP
=INDEX(A$1:A$11,INT((RAND()*11)+1),1)
to randomly select a cell but how would I modify this to include cell weightings? Or is there a better formula?
An additional note I have is that the weighting for each person will always be changing, but will always be a percentage.