I want to set a conditional format to cell A1 with a value in cell P1 When the value in P1 is between 0 and 10 the conditional value in P1 should be set.
Note
cell A1 is also set with a conditional format to put a border around it when there's a value in A1 (cellvalue is not equal to " ")
So the formula referencing P1 would be a second condition.
If the value in column AE falls below 100 it needs to turn yellow. If the value drops below 50 it needs to turn red.
But if the figure in column AB is 0 then i dont want it to do anything at all.
how to apply conditional formatting via VBA to a range of cells based on input from another range of cells. Obviously this would be easy in Excel 2010, but I'm still using 2003 at the office and it needs to stay in this format to be readable by other users:
For cells M8:EK8, my conditional formatting
condition 2: Formula Is =AND($E$8>=M2,(($E$8-$D$8)>=(N2-$M$2))), color index is 40
condition 3: Formula Is =AND($F$8<=M2,$G$8>=M2), color index is 39
I want to add:
condition 4: Formula Is =AND($H$8<=M2,$I$8>=M2), color index is 40
condition 5: Formula Is =AND($J$8<=M2,$K$8>=M2), color index is 39
and so on
The cells in the range M8:EK8 are blank, they only get colored based on input added to D8 to K8. If there is no input, then the cells should be uncolored.
resource tracking ex.jpg
I have some VBA code that formats my sheets and works fine, but the issue is that I run this same piece of code more than once in different sheets with the only difference being the formula references a different cell.
' Green Cells indicate that the supervision is within the year
.FormatConditions.Add Type:=xlExpression, Formula1:= _
"=Datedif(D8,today(),""m"")
I have a range of data on sheet1 say A1:A10 with random letters in each cell. On sheet2, I also have random letters and number in column A. What am trying to do is find a formula which if any of the data on sheet1 can be found in say A1 of sheet2 then shade the cell a given colour or if formula in B2 then show True otherwise false if not found. then do the same for the remainder of the cells on sheet2 which am assuming will be to just copy the formula in B1 of sheet2 or the conditional format in A1 whichever comes first.
View 4 Replies View RelatedSo I've applied conditional formatting to columns A and B to highlight and bold any blank entries. However since those guys tend to show up a thousand rows or so down I don't have anything to alert me that there is a problem. I know that I can just filter those columns to check but I'm not the only one using this sheet so I'd really like to have a visual cue.
Is there a way to have cell J1 highlight if any of the cells in the range (A2:H3000) have been bolded?
This is the most simplest conditional formatting which is working except on some cells. I want to compare two columns cells ex : if A=B , then format A as green.
Its working, the "formula" and "cell value contains" everything except for few cells. Cell B has formula's in it related to other cells. When i enter values in other cells, Cell B computes but A refuses to format "green".
If I just enter same value[ex 1, 1]in both the cells sans formula ,it highlights A green . I want to know , if the formula in cell B is causing the errors in formatting and if it is
I have a cell that has a conditional formatting of Cell Value< 90 the cell value is based off a formula which is
=LEFT(E48,LEN(E48)-1)
which when it comes out to me less then 90 I need it to color red. But it does not is there something that I need in the conditional formatting to tell that its a number?
I have a series of columns (L - X) each representing a diagnosed disorder (Dx), coded as binary, with 1=Positive Diagnosis (Success). The reference cell contains diagnostic codes; for each respective Dx column I need a 1 or 0, obviously. Each Dx category has a range of values (Dx codes), so I need to write syntax that reflects this range. For example, =IF(A1=>141,AND(A1=<239.99)),"1","0")
In other words, if cell value is 141 through 239.99 then return 1, else 0
Would it be something like this:
=IF(AND(A1=>141,OR(A1=<239.99)),"1","0")
I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.
View 2 Replies View RelatedI need to format cell D1 to have the fill color be red if any cell in D2:D21 is blank. I've tried
=VLOOKUP("", $D$2:$D$21, 1, FALSE) but that returns #N/A (there is one blank cell in the range at the moment).
I really don't want to use =OR($D$2="", $D$3="", ...$D$21="") if I can avoid it.
I have a range of cells where each row relates to an employee.
In Cells (Columns H:L) I want the range of cells on that row to turn blue if the user puts a "H" in one of the cells.
Also it will need to be adapted for "O" , "Y", "X" - each with different colours.
This needs to be repeated on each row for each person.
I have a large spreadsheet with a number of columns that are set up for conditional formatting. For example a column of "BUY"'s and "SELL"'s where the "BUY"s are formatted with the default "light green fill, dark green text". I have other columns that are conditionally formatted using a formula. When I base the result on a formula I don't seem to have the option to use the default formats. Is it possible to use the defaults or maybe even how to customize my format to look like the default? It would look a lot better if I had a uniform red/green style throughout the sheet.
View 1 Replies View RelatedSay I have the following....
12345678910
59465465495652505853
I conditional format the top number which in this case is 65, how do I highlight the number directly above it? Either by another conditional format or some formula that picks the number out. I've tried HLOOKUP and VLOOKUP, but its giving me spurious results.
This is a conditional formatting problem I have not been able to resolve:
I have a range, say A1:N30
Each cell contains a text/number combination.
I would like to highlight each cell on a specific row if the vale exists within the row above - the issue is that the cell values are not in the same columns.
I have attached a sample workbook with the desired output.
Conditional formatting.xlsx
I am trying to set up a conditional formatting which will look at the cell contents and check if the value exists in a range.
The range to compare will be over multiple columns and multiple rows.
way to highlight selected cells if one of the selected cells equals a certain value eg
A B C D E
1 X X X Y X
2 X X X X X
3 X X X Y X
I select cells A1-E3 and if column D = "Y" then colour fill the row from A to E
what i would like to do is change the fill colour of D68 if the word Air appears with in D5:D65?
View 6 Replies View RelatedI have this fairly simple formula which decides whether to shade a cell or not
=AND($X$1<>"TBD",R3<>"None",AC3="Y")
This is set in cell R3 and I want to copy it all the way down the cells in the R column. However, when I copy & paste (and copy and paste using paste special, formatting) the R3 and AC3 cell references do not update to match their relevant rows. eg If I highlight cell R26 the conditonal formatting formula still refers to cell R3 and AC3, not R26 & AC26. I'm using Excel 2010 but I don't recall this happening in 2003.
I have a file where the cells are all formulas.
Employees are able to key in a number instead of using the number derived from the formula.
I want the cell to use conditional formatting without the use of macros, so it will highlight yellow if the cell is keyed in instead of a formula.
Is this possible? I have tried numerous things, but none seem to work.
Example:
Cell A6 has the number 24,248 derived from a formula.
Employee thinks the number should be 30,000 and keys that number in.
If it is 24,248, I want the number to have no fill, but if it is a keyed in number, I want it to be highlighted.
I am trying to apply icon conditional formatting in a cell. The cell contains the following formula: =VLOOKUP(D20,'owssvr(1)'!O:W,9,FALSE The formula results in a "2", "1", "0" or "-1" in the cell. The icon conditional formatting is not working at all (no icon appears). I have the conditional formatting setup as numbers Green 2, Yellow 1,0 etc based on value. If I delete the formula and just type in any of those numbers directly, it works. I have changed my cells to "number" and it still does not work.
View 3 Replies View RelatedSummary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I have a list of names that belong to a particular group. What I want is to conditional format a sheet so that if a name is entered that does not belong to the group it is highlighted red. Don't really know how to do this though?
View 4 Replies View RelatedI have a spreadsheet that has a table listing employee names in the far left hand column (A1, B1, C1, etc.). The table has a simple border - black line throughout.
I need the entire row for the employee to change to no border if the employee's name is deleted.
Using the following conditional formatting formulas:
=(isblank(p99)) then the formatting of (applies to) C99:O99 will be in red and bold
=(d99="Prod.") then the formatting of C99:P99 will be blue and bold
but the results are not as expected. Is something wrong with these formulas?
I was looking to use the VBA conditional formatting script posted on OzGrid and was curious if it would be easy to make some slight modifications.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
Select Case Target
Case 1 To 5
icolor = 6
Case 6 To 10
icolor = 12
Case 11 To 15
icolor = 7
Case 16 To 20 ..........................
I can see that Case is the number range referenced to change the background...However, would it be possible to have it read a cells value as the criteria for the color change? Currently, I would like it to reference values in range I2:M2 and anything matching those cells in range A4:E28 change background to icolor = 30. I'm just not sure what to replace Case with to make it refence cells I2:M2
I have a sheet called Quote Summary and a sheet called AssemblyBoms.
In the Bom sheet, I have a named range for QtyPer and a named range for unit price because these ranges are dynamic.
On the quote summary sheet, I want to format the cell (A9 and eventually A9 to A28 and so on), which contains a formula right now that only references a tag and does some equivalence checking
(=IF(AND(QSA>0,QSA=qty1a),assembly1,"")),
to have a yellow background if QtyPer>0 but unit price = "" or 0. I know the formulas for this, but it is not formatting anything. Attached workbook below.
QUOTETEMPLATEMACROTEST.xlsm
Conditional Formula for true:
="AND(qtyper1 > 0, unita1 = "")"
I typed it in without the = or "", but the formatting added those in for me.
I typed a number in the qtyper1 range and left the unita1 range blank to test it and no formatting has occurred.
I have a column of dates in column M, and in A1 I have the formula =TODAY() for today's date. I would like to conditionally format all of column M (up to row 198) so that it turns orange if the date in M is before today and after or equal to 3 working days before the date in M.
I have this
=AND($A$1<M2,$A$1>=(WORKDAY(M2,-3)))
But it doesn't appear to be working because it's highlighting dates after todays date.
Have a spreadsheet using the following conditional format to color highlight every other row: =MOD(ROW(),2)=1. Is there a way to apply this conditional format to all columns A through AR and all rows 1 through 24000 only?
View 3 Replies View Related