I applied a CF in my worksheet that has customers and associated information. The formula is as follows: =IF(ISERROR(VLOOKUP(A1($AA$1800:$AA$1816,1,FALSE))FALSE,TRUE. Then I applies a fill color, if the word is found in the lookup range, the cell color is highlighted. Can someone tell me why this is not working?
View 9 RepliesI'm working on a report that uses part numbers in column J, starting in J6. I'd like to highlight the entire row if a certain p/n from a lookup table is in J. (the table is in the sheet "Testers" from A2 to A42 and the relevant p/n's are in column "A") I went to cond format and in use a formula to determine formatting I entered:
=vlookup($J6,Testers!$A$2:$A$42,1,0)
And then selected a fill format but whan I apply it does not work. I tinkered with the $ to ensure it jumps to the next row but stays in the column but I cannot get this to take.
I currently use VLOOKUP to return a value from other spreadsheets. However, I need Excel to firstly check the contents of a particular cell, and then decide which spreadsheet to look up. So, for example if the vaule in cell C3 = 1 then VLOOKUP spreadsheet "ABC", if value in cell C3=2 then VLOOKUP spreadsheet "XYZ" and so on.
View 4 Replies View RelatedMain (Sheet1) - Got a table with several informations relative to a number of a house
House1 (Sheet2) - Want the information extracted from Main (Sheet1) to a table.
House2 (Sheet3) - Want the information extracted from Main (Sheet1) to a table.
So basicly i want to extract the info from Sheet1 if it matches the Number of the House on sheet2.
With Vlookup can only get a cell value as i am not an expert in excel
See the attachment
I have a set of data in A:P
I have a named range "TR" in which I need to look up a value
I would like to conditionally format Columns M:P if the value in the cell is less than a value in the lookup table
Column M corresponds with the 2nd column of the lookup table
Column N corresponds with the 3rd column of the lookup table ETC
My formula would be:
if M2 < Vlookup(b2&g2,TR,2,false) then conditional format
if N2 < Vlookup(b2&g2,TR,3,false) then conditional format
etc for Columns O and P
I have attached a sample workbook. TEST CONDITIONAL FORMAT.xlsx
I essentially want a worksheet level function equivalent to the following VBA function. When I try to use this function and copy it down 155,000 rows it takes far too long.
The function should check a second worksheet for both Prod Code and Client Number and where it finds both it should return the price of that product code specific to the client.
Function ClientPrice(x, y)
'x = Prod Code
'y = Client Number
[Code]....
these are two tables i have to compare.Sl No
Type
1
NORMAL
2
NORMAL
3
NORMAL
4
QUAD
[Code] ........
Sl No
Type number
1
1
2
1
[Code] ........
where,
1=NORMAL
2=QUAD
3=BI-DIRECTION
i want to compare between these two table based on the condition writen in RED. IF there is a mismatch i want to highlight the values in the first table.
I need to format cell D1 to have the fill color be red if any cell in D2:D21 is blank. I've tried
=VLOOKUP("", $D$2:$D$21, 1, FALSE) but that returns #N/A (there is one blank cell in the range at the moment).
I really don't want to use =OR($D$2="", $D$3="", ...$D$21="") if I can avoid it.
i have a formula in a cell:
=IF(ISERROR(VLOOKUP($D11,PRMC!$O$15:$P$1048576,2,FALSE)),"",VLOOKUP($D11,PRMC!$O$15:$P$1048576,2,FALSE))&IF(ISERROR(VLOOKUP($E11,PRMC!$O$15:$P$1048576,2,FALSE)),"",VLOOKUP($E11,PRMC!$O$15:$P$1048576,2,FALSE))
The first half of the vlookup searches for data and returns a dollar amount if true The second half of the vlookup searches for another data set and returns a dollar amount if true...
Both amounts could be the same, so I cant use a formula based on numeric value
the conditional format must determine which vlookup is returning the result
in other words I'd like to conditionally format (grey fill) if the first vlookup returns data and conditionally format (blue fill) if the second vlookup returns data
Probably have to "use a formula to determine which cells to format"
This had been hunting me for weeks and I still could not come over it after weeks of study the conditional formating IF, match, index, Vlookup, etc to find several duplicated value, e.g Column B = Name 1 & Row B = Time and so on, where as Name will have data of Name 1 duplicated in different time, while row B, "Time"would change to a different Name and maybe it would go back to Name one.
My problem was dont know which formula I can use in a different sheet to bring back the data to Name 1 did Task A at Time A, while Name 1 did Task B at Time K, etc. If this is not Name 1, then Name B replace above.
I need to create a formula that will give me True or False if text in a cell matches any cells in a range.
For example:
Column A and B have text:
Account
Date
Name
Species
Column C has other and sometimes matching text:
Name
Deal
What formula would I use to find out if all cells in Columns A and B are represented in Column C?
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Having trouble changing this formula from its current Median to a Quartile or Percentile. The median formula looks like this:
(MEDIAN(IF(DATA!$B$15:$DZ$15=1000,DATA!$B26:$DZ26))) and works perfect.
However I can't figure out how to manipulate it into a percentile keeping the condition of
IF(DATA!$B$15:$DZ$15=1000)
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies View RelatedI’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:
View 5 Replies View RelatedI have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI have a list containing blocks of stock price values with each block representing a series of values at a given time e.g
1400 156
1400 99
1400 74
1400 86
1400 256
The number of entries may vary for each block but is never more than 60. the next block may be e.g.
14:05 15
14:05 42
etc
and down a very long list of around 65000 entries. I'm looking for a routine that will add up all the values in each block and calculate the total for that time block. I then need to fill in an adjacent column with the perecentage that each value is of the total. A completed block may look like;..............
I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
I'm taking a spreadsheet that I produce each month and creating a year to date spreadsheet in the same format. I'm using a vlookup to find the campaign name in each sheet and add up the totals. This works fine but sometimes a camapign ends and so the vlookup for that month will produce an #n/a value so will reduce the whole sum to #n/a.
The VLOOKUP + VLOOKUP + VLOOKUP I was using that produced an #n/a is shown below.
=VLOOKUP($A6,'[Margin by Site Net April 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)+VLOOKUP($A6,'[Margin by Site Net May 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)+VLOOKUP($A6,'[Margin by Site Net June 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)
To get round it I've added in an IF statement combined with ISERROR as shown below. It works but is looking quite messy. Is there an easier way to do this ? (the formula below is from the cell below the one above so the look up value is one cell down)
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I am trying to use Vlookup to find out the min and max sales of the products shown in the spreadsheet. I have used Vlookup before but only by itself and with 2 columns.
View 5 Replies View RelatedI am trying to create cell to calulate the total cost from a column is a pivot table. I thought i had done it but then realised that it doesn't account for dupliate suites that occur.
I thought that using VLOOKUP might work for this but not sure how to do it.
What I am looking for is to say (for pivot table sheet) if cloumn b contains arable then total cost =395, however if column b contains arable and forestry then total cost = 395, however if column b contains arable and urban then total cost = 420..... but for all possible cases.
At the moment if column b contains arable and forestry total cost = 520
Example:..............
I want column B to be populated with the details from Sheet1, Column B if A = A and if not found populate with the text "NO ID". However for valid results, I'm getting #REF! The formula I'm using is:
=IF(ISNA(VLOOKUP(A1,Sheet1!A:A,Sheet1!B:B,FALSE)),"No APW ID",VLOOKUP(A1,Sheet1!A:A,Sheet1!B:B,FALSE))
I'm assuming this is because the value of Column A is text and not a numerical value but am having a real blonde moment as to how I can solve this.
I added the roundup column because i thought that might be the problem.
=VLOOKUP(0.18,B4:C2819,2,FALSE) result=#N/A
A B C D
GP%roundup profit price
0.350.36 $635.00 $1,800.00
0.350.36 $630.00 $1,795.00
0.350.35 $625.00 $1,790.00
continues
0.190.19 $265.00 $1,430.00
0.180.19 $260.00 $1,425.00
0.180.18 $255.00 $1,420.00
0.180.18 $250.00 $1,415.00
0.170.18 $245.00 $1,410.00
0.170.18 $240.00 $1,405.00
im trying to created a worksheet that adds the number of days people are off in a year, i have come up with this formula as people can chage teams and therefore position in the worksheet,
View 4 Replies View Related