I want to create a conditional format formula which is based on values in 2 cells.
Example:
Cell B1 = 100
Cell C1 = 50
I want a formule for cell A1 which turns red for exmaple when B1 is higher then 85 and Cell C1 is lower then 85. Only in this case the conditional format should work.
I am lookin to apply CF to a cell based on the value of the left two numbers in a concatenated formula. If the value of the left two numbers are greater than zero the apply the CF
View 6 Replies View RelatedPicture1.jpg
How do I create a CF if a cell is blank (in my case represent no sales) i want to have it yellow (ex. C2)
But if it has two consecutive blank cell i want to CF with Red. (Ex. F3)
But i also need to exclude blank cells when we we have no previos sales of that item (Ex.B3).
I have a drawing register that contains drawing reference numbers in column D. When a new revision of a drawing is issued it is added to the bottom of the list. What I would like to do is any previous revisions to be greyed out and struck through.
The conditional formatting
= COUNTIF($D$1:$D$100,D1)>1
works well but strike through all duplicates, I need the most up to date left without the format until it is superceeded
I'm looking to conditional format a cell/cells based on whether a formula result returns a whole number or not.
I don't want to include the formula in the sheet itself, just have that as the formula in the condition.
The formula will be along the lines of:
=IF(SUM(BB10/BA10)"a whole number",TRUE,FALSE)
My problem is, is that I don't know who to refer to "a whole number" in Excel formula language.
I am using a conditional formula to compare if a cell in column A is higher than a cell in column B. If a cell is blank the cell is formatting. I am trying to highlight only cells with numbers. Any formula to place in the conditional format formula that will evaluate the cells excluding a blank cell?
ie: grapes and pears should be highlighted because value in column B is less than column A but the conditional format is highlighting apples also where apples should have no highlighting because the value in column B is none or blank.
A B
oranges 2.49 3.25
grapes 1.99 1.89
apples 1.00
pears 1.11 1.03
This should be pretty straight forward but the solution has escaped me so far. I have some formulas that ratably spread monthly budgets across the life of a program. Ocasionally these budget formulas are hard keyed over with a value which overrides the ratable budget formula. I would like to conditionally format all cells that contain hard keyed values so they don't get inadvertently copied to new budget lines.
View 8 Replies View RelatedI am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
A1:A6 have numeric values 1 to 6.
I want the conditional format values to change Based on the value in Cell B2.
If the value in B2 is "old", then I want these conditional format conditions for A1:A6. Numbers between 1-2=green text, 3-4=orange text and 5-6=red text.
IF the value in B2 is "new" then I want the conditional format conditions in A1:A6 to change so 1=black text, 2-3=green text, 4-5=orange text and 6=red text.
I know how to do multiple conditional formats but i have no clue how to change multiple conditions based on another cells value.
Wondering if it is possible to conditional format cells in "Jan"-"Dec" columns based on "Next" column data?
What I need is (lets say fill colour to differ) in one cell per row, based on latest input and "next" data.
Month Avg
Date
Jan
Feb
Mar
Apr
May
Jun
Jul
[code]......
So for example:
row2: May is latest input so need fill in cell +2("next" column data) from may. In this case July
row3: Feb is latest imput and "next" also 2. Result should be Apr
row8:May is latest input, "next" is 6. Res should be Nov.
Finally, only one cell per row to be highlighted so need to overwrite colour fill when new data input in a cell already colour filled.
I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
I need a formula for conditional formatting which highlights a row if A has the text "Ex" and B has "Paid".
View 2 Replies View RelatedIs it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
I am wondering if I could have a formula be used against a certain row/cell containing a certain "phrase" or "number" for instance
I want E1 to read something like this = (row containing item "FF32105") (the given row from the previous statement) ( the input column ex. B) (the input value ex. *6)
Essential I want to be able to copy and past a sales forecast and have the formulas automatically (listed below the pasted forecast) calculate purchase needs. The issue is that if our forecast one month has a certain item and then the next does not then they will end up on different lines after the copy/paste. We have over 500 items so a manual adjustment would be time consuming..
Is there a possible way for the formulas to "find" the correct line to start calculating data?
how to apply conditional formatting via VBA to a range of cells based on input from another range of cells. Obviously this would be easy in Excel 2010, but I'm still using 2003 at the office and it needs to stay in this format to be readable by other users:
For cells M8:EK8, my conditional formatting
condition 2: Formula Is =AND($E$8>=M2,(($E$8-$D$8)>=(N2-$M$2))), color index is 40
condition 3: Formula Is =AND($F$8<=M2,$G$8>=M2), color index is 39
I want to add:
condition 4: Formula Is =AND($H$8<=M2,$I$8>=M2), color index is 40
condition 5: Formula Is =AND($J$8<=M2,$K$8>=M2), color index is 39
and so on
The cells in the range M8:EK8 are blank, they only get colored based on input added to D8 to K8. If there is no input, then the cells should be uncolored.
resource tracking ex.jpg
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I want to be able to change the font color of the numbers in a column based on even or odd. I selected the columns and formated them to all be blue... thats the color I want for even, but now I can't figure out how to set a condition that checks for odd numbers and changes them to red. I now have a count of even/odd for all records, and even/odd for the last 30, this provided some very interesting results.
View 9 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003)
Top 34%:
=IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*100%)),MAX( $D$3:$D$38))
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View Relatedi have a spreadsheet which is used to keep the training records for the company it counts no of staff and their skill levels for different parts of the job, when a person moves to a different branch the skill required changes and they have a set period of time to aquire the new skill.
when the time is up the colour of the old skill is changed to a red font by a conditional format based on the date.this is then counted by a calculation so the team know how many people are to be targeted for extra training.
the problem i have is the calculation will not count conditionally formated cells, so whenever i update the sheet i have to go to each cell with red text and change the font colour manually to red, this sounds really silly and is impossible to explain to anyone who does not understand conditional formatting. i e the people who will end up using the database
what im looking for is a way to count conditionally formatted cells based on the condition being met i.e. they are showing as red font.
I have a row of cells pertaining to jobs B3 across to I3.
In B3, C3, D3, E3 the value entered is text.
In F3, G3, H3, I3 the value entered is time.
What I am trying to do is to change the Background colour to Red on cells
F3, G3, H3, I3 if either H3 or I3 or are empty at the end of the current day but only if there is some text in any or all of the cells B3 - E3
So for example if H3 or I3 have no time put in them by 23:59 today, when the workbook is opened tomorrow the cells background colour will turn red.
Not sure if this if poossible or not? hopefully I have explained it well enough but if not pease let me know.
I have the following code. I am trying to conditional format a row based on the value of the A column of the row.I have a total of 3 rows. I have to use VBA because in time I may have 4 rows of data. The problem is I after the first do while loop the code stops and the code doesn't proceed to format row 2.
View 2 Replies View RelatedIm having some issues with some code Im working on. My goal is to delete the rows that do not have conditions met. Conditional formatting is used in 6 columns of my spreadsheet and the cell fill is to turn red when below .50 . This code is shown below. What I need to do now is look at the 6 columns where the conditions are applied, and delete any rows where the column cells are not red. To further clarify, if in row 1 column X:X does not meet criteria, but column AL:AL does, the row would not be deleted. However if none of the columns meet the criteria, the entire row is deleted.
View 6 Replies View RelatedWith the click of a toolbar button, I've got my vba inserting a new tab, renaming it, inserting headers and now working on the code to insert all the formulas needed in 12 columns to copy down as far as there is data.
The 4th column D is the hardest. Currently, I'm using manual "Conditional Formatting" to colorize the cells in Col D but need the VBA to place that "Conditional Formatting" code into the sheet so that when the sheet is created, it will hold the conditional formatting feature.
Specifically, the formulas I'm using in the Conditional format wizard are:
Formula: =$B2$D2 then turn the cell red Applies to: =$D$2:D
Copy down (in other words, the colorizing should work all the way down Column D as long as there is data in Col D.
How to write a VBA that will, if the value of a cell in column "U" is TRUE, that row's FONT (for the row the TRUE cell is in) will turn red.
View 4 Replies View RelatedI have a spreadsheet with due dates in column X. I want to create conditional formatting so that cells turn red when the due date is less than or equal to 30 days away, but turn gray when the due date has passed.
I've accomplished the first step by using the following: =AND($X6
I'm afraid as its a multiple conditional format and thus needs coding. At the moment I'm using the following
Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions
Dim rng As Range
' Target is a range::therefore,it can be more than one cell
' For example,,someone could delete the contents of a range,
' or someone could enter an array..
Set rng = Intersect(Target, Range("E27:E34,G27:G34,I27:I34,K27:K34,M27:M34,O27:O34,Q27:Q34,S27:S34,U27:U34,W27:W34,Y27:Y34,AA27:AA34"))
If rng Is Nothing Then
Exit Sub
Else.....................
This works very nicely, so that for example if I type the number 10 into cell M33, that cells fill colour becomes black (and the text turns white). Alas I would now also like to extend the fill and text colour to the cell one to the left too. To take this example I would type 10 into cell M33 and cells L33 and M33 would both be filled black and their text would be white. I'm not sure if this requires a change to the code, or if its possible to just have a formula or something which copies the fomatting of one cell into another