I am making the monthly schedule for my colegues. I wonder if there is a conditional formula that can highlight a row with 10+ cells if in one of them I type SUNDAY or something.
I am attaching an example of the schedule. I thing you will get my point.
I want to create a conditional format formula which is based on values in 2 cells.
Example:
Cell B1 = 100
Cell C1 = 50
I want a formule for cell A1 which turns red for exmaple when B1 is higher then 85 and Cell C1 is lower then 85. Only in this case the conditional format should work.
I am trying to conditionally format some data in cells A3:A6 (shade the cells) depending on whether a number in B1 is 1 (green), 2 or 3 (blue), or 4 (red).
View 3 Replies View RelatedI am using a conditional formula to compare if a cell in column A is higher than a cell in column B. If a cell is blank the cell is formatting. I am trying to highlight only cells with numbers. Any formula to place in the conditional format formula that will evaluate the cells excluding a blank cell?
ie: grapes and pears should be highlighted because value in column B is less than column A but the conditional format is highlighting apples also where apples should have no highlighting because the value in column B is none or blank.
A B
oranges 2.49 3.25
grapes 1.99 1.89
apples 1.00
pears 1.11 1.03
This should be pretty straight forward but the solution has escaped me so far. I have some formulas that ratably spread monthly budgets across the life of a program. Ocasionally these budget formulas are hard keyed over with a value which overrides the ratable budget formula. I would like to conditionally format all cells that contain hard keyed values so they don't get inadvertently copied to new budget lines.
View 8 Replies View RelatedI need a formula for conditional formatting which highlights a row if A has the text "Ex" and B has "Paid".
View 2 Replies View RelatedI need conditional formatting formula that evaluates the values in a row of cells (7 total columns) and counts the number of entries that are 30 or greater. If there are at least three, then I need to apply formatting.
I just can't get the formula right:
Code:
=(COUNTIF(B7:H7,
I'm trying to find a single conditional formula which summarizes multiple text occurrences in a range of cells. I managed to summarize the occurrences in a single cell, but my challenge is that I'm looking for a single (array?) formula for this.
I have a worksheet with column A which contains the condition and column B which contains a text field. I'm looking for a single formula to summarize all the 'AB' occurrences in the cells B4..B11 where the column A is Apple. I managed to do this by using an additional column (column C), however as my worksheet contains over 10000 rows, I would like to use a single conditional (array?) formula summarize the AB occurrences (multiple ' AB's can occur in a single cell) in stead of having to use an additional field per row.
I have attached a sheet as an example. I'm looking for a single array formula in cell C11 which summarizes the 'AB' occurrences in cells B4..B11 where column A is Apple.
I have attached a small file with a very simple conditional formatting formula used to turn a block of cells green.
However, the formula does not seem to work properly as it only turns half of the cells green. Columns B1 to B18 are also supposed to turn green, but instead remain clear.
I am wondering if I could have a formula be used against a certain row/cell containing a certain "phrase" or "number" for instance
I want E1 to read something like this = (row containing item "FF32105") (the given row from the previous statement) ( the input column ex. B) (the input value ex. *6)
Essential I want to be able to copy and past a sales forecast and have the formulas automatically (listed below the pasted forecast) calculate purchase needs. The issue is that if our forecast one month has a certain item and then the next does not then they will end up on different lines after the copy/paste. We have over 500 items so a manual adjustment would be time consuming..
Is there a possible way for the formulas to "find" the correct line to start calculating data?
I need to be able to get a macro to do this. I recorded the macro. The conditional worked, but when I cleared it and then ran the macro, it highlighted all of the wrong stuff. Here is what I want to do: In column(AJ) I have cities with Prefixes or not In another column (AV) I have Criteria1 and in yet another, I have criteria2 (CB)
City
(AJ) Criteria1 Criteria2
SCRNRTH_SCRM1 FALSETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE
A9_SCRNRTH_SCRM1FALSETRUE
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
SCRNRTH_SCRM1 TRUETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE
SCRNRTH_SCRM1 FALSEFALSE
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
A9_SCRNRTH_SCRM1TRUETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE....................
I have a spreadsheet filled with formulas that depend on a value being entered into A2, A3, A4, etc... So column A starting at A2 is where I will manually input a number and the formulas I have in columns B, C, and D will import information from another sheet based off what is put in column A. In column D the formula I have to import data
is =IFERROR(VLOOKUP(A2,Master!C:M,11,0),"").
This will import another number. Additionally in column D, I have conditional formatting that will return a red, yellow or green light based off the rule I have in place. Everything works fine, the only problem is that column D has a green light all the way down even without a value being placed in column A. I would like to find out a way to keep the cells in column D blank until a value is entered in column A. Also, if I go back and delete the value in column A, I would like the corresponding cell in column D to go back to blank as well.
how to apply conditional formatting via VBA to a range of cells based on input from another range of cells. Obviously this would be easy in Excel 2010, but I'm still using 2003 at the office and it needs to stay in this format to be readable by other users:
For cells M8:EK8, my conditional formatting
condition 2: Formula Is =AND($E$8>=M2,(($E$8-$D$8)>=(N2-$M$2))), color index is 40
condition 3: Formula Is =AND($F$8<=M2,$G$8>=M2), color index is 39
I want to add:
condition 4: Formula Is =AND($H$8<=M2,$I$8>=M2), color index is 40
condition 5: Formula Is =AND($J$8<=M2,$K$8>=M2), color index is 39
and so on
The cells in the range M8:EK8 are blank, they only get colored based on input added to D8 to K8. If there is no input, then the cells should be uncolored.
resource tracking ex.jpg
Having trouble changing this formula from its current Median to a Quartile or Percentile. The median formula looks like this:
(MEDIAN(IF(DATA!$B$15:$DZ$15=1000,DATA!$B26:$DZ26))) and works perfect.
However I can't figure out how to manipulate it into a percentile keeping the condition of
IF(DATA!$B$15:$DZ$15=1000)
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedWorking in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003)
Top 34%:
=IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*100%)),MAX( $D$3:$D$38))
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedIs there a way to set up a conditional format for several cells so that the cells are filled in with red until the user enters text in those cells??
View 5 Replies View RelatedWhat I am looking to do is;
If cell A2 = "Closed"
then I want cells B2 and C2 to strike through its own text.
I.E.
A2= anything other than "Closed"
then B2 and C2 = Blah blah blah
but if
A2 = Closed
then B2 and C2 = Blah blah blah
I have attached the sample. I need the cells without the employee or without a boss to highlight a color and i also need the date of certification to highlight if it is more than one year old.
conditional formatting.xlsx
I am trying to figure out 3 differnent percentage categories but I cannot figure out what formula or conditional formatting that I should be using. The scenario is as follows:
For example, Jamaal is authorized for 80 hours per month but only uses 15 hours.
What I need to figure out is if he is below 25% of hours funded, then he will be exited from the program. If he is between 25% and 50%, then he will be warned. If he is between 50% and 75%, then he has excellent attendance.
Therefore, I came to the conclusion that:
0.25% x 80 = 20 hours
0.50% x 80 = 40 hours
0.75% x 80 = 60 hours
Which means that Jamaal is in the below 25% category, meaning he will need to be exited, unless he improves his attendance. But what I want to show on my spreadsheet, is a color RED for below 25%, and other colors for the other categories. But I don't seem to be able to conclude it all into 1 cell. I tried using the Conditional Formatting and the below 25% works but once I add a new rule for between 25-50, then my rule for below 25% doesn't work anymore. I don't know if an actual formula exists for this. Does will be a monthly spreadsheet that I will be working off of so it would be nice if all I do is input the total hours used and BOOM it tells me if the client is below 25% hours used or above.
Have 2 conditional formattings going on in a database query and need to apply two more conditions but only have 1 conditional formatting left. I am trying to highlight everything in a row that contains either "HCAT" or "HCAL" in column D. So far I have this,
=$D2=OR(HCAT,HCAL)
but its not highlighting anything, any clues?
I am trying to create a conditional/IF formula contingent on 3 different possibilities for f2, with the formula I wish to use based on these 3 possibilities, as shown below:
If f2 <=10, f2*100
If f2 >10 but f2<20, 1000+((f2-10)*50)
If f2 >=20, 1500+((f2-20)*20)
I'm not sure how to create this formula using three different conditions, especially as it is unclear to me how Excel needs to have the parenthesis placed.
Hello, I cant figure out how to do this! I have a cell B2 that I enter a number in and in cell C2 I want it to add the number from B2 and add 15 to it. I can get the formula "=B2+15" and it works but I wont always have a number in B2 and I want it to say "0" and "0" would be in C2. Any ideas?
View 3 Replies View RelatedI would like to concatenate cells from a column based on the match in the
preceding column with a defined value.
Example:
Col. A B
Row1: T1 Jim
Row2: T3 Paul
Row3: T1 Joe
Row4: T2 Mike
Row5: T3 Caroline
The formula should return for T1 for instance: Jim;Joe;
(for T2: Mike;
for T3: Paul;Caroline
Cells in column A can repeat any number of times.
I want to set up formula in conditional formating so that when:
$AF6 = "CA" the color is red
or
if $AF6 = ("GA","ME","PR") then the color is blue
what I came up with is Condition 1
= ($AF6 ="ca") [which will turn the cell red]
Condition 2
="OR($AF6={""GA"",""ME"",""PR""}, "")" [which doesn't do anything]
I simply need to have column A be red if value is < Column B value and green if it is >. The problem is that if the value in column A is .00000004 and column B is .00000005, it turns red. Example is the first three numbers below the headers....they each are 0%, yet the value on the left turns red because it is .0000005 more than the value on the right. I just want the colors to reflect the numbers which show up as below. Is there a way to do this?
2011 % of PDD
2011 % of Total $
0%
0%
0%
0%
0%
0%
[code].....
I have a file with two columns
Column A has a list of equipment names, for example: EQ1, EQ2, EQ3, etc.
Column B has serial numbers of equipment from column A.
I need to create a complex conditional formatting, which will check:
If A1=EQ1, and B1"HCC*" then make it red,
OR
if A1=EQ2, and B1"ABC*" then make it red,
OR
if A1=EQ3, and B1OR("CDE*","FGE") then make it red.
And then same thing for A2, B2 cells.
I have thousands of rows in both columns.
I have to check whether selected equipment name corresponds with entered serial name pattern. I don't know how to do it for each row separately.
I thought of something like:
1st condition: =AND(A1="EQ1",LEFT(B1,3)"HCC")
2nd condition: =AND(A1="EQ2",LEFT(B1,3)"ABC")
...
But how do I apply this conditional formatting to each row, so that it will compare A2 with B2, A3 with B3, and so on, instead of comparing A1 with B1 in all of the rows?
1. I have a range of random numbers within a column, i.e. A1:A9
2. A specific number will appear in a cell at the end of that column, i.e. A11
3. I need to see via conditional formatting which of the above cells add up to that number.
I am aware that given the numbers in A1:A9, it is possible to have more than one combination of numbers that add up to A11. I would need to see those combinations as well identified using Conditional formatting.