Copy Named Range Data To Worksheet Based On Dropdown Or Combobox
Feb 10, 2013
I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.
Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.
View 9 Replies
ADVERTISEMENT
Jul 22, 2014
I got a very technical sheet which needs your experience to work.
open the attached file below to see the workbook.
It has 3 different sheets. "RESULT", "INPUT" and "SWITCH"
On "RESULT" Cell (O11) is where the person would put a Reference.
This reference is then checked on the "INPUT" sheet column A.
From the first cell it appears in Column A, until the last cell it appears in Column A should be the Row Range (Blanks included).
But I want that range (Column A to G) to be copied to "Switch" sheet. Pasted in Cell A1 downwards.
In the "SWITCH" sheet I have already given all the GREEN Cell formated areas a name - INFO.
I want all the data in INFO to be inserted into "RESULT" sheet between row 18 and 19.
I have colour coded most of the areas for you.. And added a button from which the Macro / VBA should run when clicked.
View 1 Replies
View Related
Mar 23, 2007
How can I copy the Named Range definitions from one worksheet to another in the same workbook? In case it matters, the Named Ranges refer to cells in a third worksheet in the same workbook.
View 6 Replies
View Related
Mar 14, 2012
I have a named range of values on Sheet2 (GPI). Sheet1 is an OLAP pivot table containing row label (GPI 14) and values (Net Rx Count) only.
Unfiltered this list is over 7,000 rows. I need VBA code to display only those rows where the GPI 14 value matches any value in the named GPI range on Sheet2.
In other words how can I display the select rows without manually selecting the items of interest AND without manually hard coding the values in the code as they will change.
Below is 1 of the many codes I tried. This appears to be the most intuitive but I get an 'invalid procedure" error at Set my PivotTable...
'Sub PivotAnalysis()
'
Dim myPivotTable As Excel.PivotTable
Dim myPivotField As Excel.PivotField
Dim myPivotItem As Excel.PivotItem
[Code]....
View 4 Replies
View Related
Apr 5, 2013
I have a grade book with 17 worksheets 1 for each subject = each of the sheets are identical with the students names in col B and the data is entered manually in the corresponding cols along side the names.
What I would like is a vba solution to enter the data in a worksheet called 'datainput' = which would be identical in layout as the above subject sheets= and by the use of a drop down list with the names of the 17 subject sheets = copy the data in the 'datatinput' worksheet into the next available blank col in the worksheet selected from the drop down list=and with a command button erase the data in the 'datainput' worksheet ready to enter new data.
View 9 Replies
View Related
Jun 2, 2008
Now what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
View 9 Replies
View Related
Feb 14, 2013
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
View 1 Replies
View Related
Apr 5, 2013
I've created drop-down lists in cells B3 and B4 (this is in worksheet 1), based on a column in Worksheet 2. I'd like Worksheet 2 to autofilter the data based on the drop-downs in B3 or B4, or both together.
View 2 Replies
View Related
May 23, 2007
'i use a combobox in a userform to show data from a hidden sheet its name is sheet5(sheet1).
'i defined the Range as ExpCat and put ==OFFSET(Sheet1!$M$3,0,0, COUNTA(Sheet1!$M3:$M9),1)
'and use this code to view the data, but the code shows the data of the activesheet.
Private Sub ComboBox1_Click()
Me.ComboBox1 = ThisWorkbook.Worksheets(5).Range("ExpCat").Value
'Me.ComboBox1 = ThisWorkbook.Sheet5.Range("ExpCat").Value
End Sub
View 9 Replies
View Related
Jun 16, 2014
I want to make simple Combobox with two dropdown lists throwing me back cells values, but I never made that so I've got a little difficulties.
The sample combobox should look like this:
Clipboard01.png
For the left Dropdown list there's defined name of the range "ITEM1", and for the second - range named "ITEM2".
After user will choose something I want to have numbers of the items selected from the lists in cells "A1" and "A2", and run a macro after clicking OK. How can I do this?
View 1 Replies
View Related
Jan 9, 2007
I use
Set rnData = ActiveSheet. Range("ProductList")
vaData = rnData.Value
With Me.model
.Clear
.List = vaData
.ListIndex = -1
End With
to populate a combobox list. 'ProductList' is a Dynamic Named Range with the definition
=OFFSET(Stock_List!$L$2,0,0, COUNTA(Stock_List!$L:$L)-1,1)
The '-1' allows for a heading at the top of the column.
This works fine when the list in col. L has more than one entry under the heading. But with only one entry I get 'Runtime error 381 - Could not set the List property, Invalid property array index' and the debug highlights on
.list=vaData
View 9 Replies
View Related
Feb 4, 2014
I am trying to work up a referral tracker for my wife's employer. I have Named Ranges on sheet 2, a running log on sheet 1. I also have a userform that is being populated from the ranges on sheet 2. I have the project mostly functional, except for a feature I would like to add in. I am interested in adding to the named range that is being accessed if the entry is not in list, via the combobox1 on the userform. Also, if possible, I would like the list to re-sort behind the scenes so the added entry is properly located in A-Z format for next time. After searching the web a bit, I found some code that might work with some tinkering, but currently I am having issues with it. Here is the bit I am trying to use.
[Code] ....
I have been getting 424 Object Errors and a few others as I continue to mess with this. I am also attaching the project if someone may see a better way of getting the task accomplished. The overall scope of this is to log all referral sources so monthly and yearly reports could be made.
Attached File : Copy of Referal Tracker.xlsm
View 3 Replies
View Related
Nov 28, 2012
I have a workbook that has a 50 years worth of daily values for ~30 data streams. Each data stream is a tab, days are in rows with each year a new column. I want to plot selected date ranges of selected data streams from selected years on one page. So I have a tab, "QuickCharts" that has a spinner to change the year and based on that change it pulls in two dozen different data streams (reservoir information, so we're talking Inflow, Outflow, Stage, Temperature, etc at different sites). I have static plot of the entire year's data for each site. This much works fine.
I want to be able to dynamically change the plot ranges, though, with spinners. I created 12 named ranges using this type of syntax:
Code:
=OFFSET(QuickCharts!$Y$3:$AP$367,PlotStart,9,PlotStart+PlotOffset,1)
where PlotStart and PlotOffset are named cells containing a single value.
Things that work:
- I can perform operations on the named range (e.g. =Average(PR_XAxis) works fine)
- I can go to the named range dropdown in the upper left and type the range names in, and the range is selected as expected.
- The named ranges are offered as autocomplete options when typing in cell formulas.
Things that don't work:
- These named ranges don't appear in the named range dropdown list at the top left - I can type them in, but they aren't there by themselves.
- I cannot use those named ranges as series for a chart.
I tried replacing PlotStart PlotOffset with the absoilute cell references. That didn't work.
I tried scoping to worksheet instead of workbook - didn't work.
This seems to be related to this question, but the solution there isn't working for me. Selecting Chart Data Sources Using Named Ranges...
View 6 Replies
View Related
Apr 19, 2013
I have data that resembles (I have also attached an example workbook as well if that is easier)
Column A.................Column B................Column C..................Column D.............Column E................Column F
Year.......................Quarter...................Month..................Product-Code...........[data A]................[data B]
2013.........................Q1.........................Jan........................SD-21...................13%......................0.05%
2013.........................Q2..........................Apr........................NV-12...................7%.......................6%
etc
I am hoping to have, on another sheet, a series of dependent drop boxes- Year, Quarter, Month, SKU- which after selecting then displays 'dataA' & 'dataB'.
So you could select- List 1: 2013 ----> List 2: Q1 ----> List 3: Jan ----> SD-21.................and then 13% and 0.05% are displayed.
The data will be continuously added to and so needs to be based on a dynamic data range.
I know that a pivot table is the perfect way to do this, however my bosses have requested that I do not use that format so it is easy for all staff to access.
So I think I need to construct some sort of dashboard sheet, I have experimented with OFFSET from other posts, but so far have had no joy.
View 14 Replies
View Related
Apr 25, 2013
I'm trying to copy data from one sheet to another sheet automatically based on a number selected in a drop down control.
I have used OFFSET to pull some information successfully from a list. This is easy for me to do with single entries and a list and has worked well. I want to do similar but with a dataset not just single cells.
But, I can't seem to make OFFSET work to show a set of data easily.
Perhaps I will need VB code to do so? Or there is another control I'm not aware of? I've done very little with VB.
I'll attach a sample file to try to show better what I'm trying to do.
View 7 Replies
View Related
Apr 22, 2013
=AVERAGEIFS(MFI,DATE,">="&JanStart,DATE,"<="&JanEnd)
MFI is the named ranged that is referencing a column of data. This works, but I want to be able to change the MFI to a different named ranged.
So what I am trying to do is using an ActiveX Combo box so I can reference the named ranges that I have set, for example MFI, so each time a user chooses MFI or another named range, it will output to a linked cell (A1). Then the linked cell will be referenced into this forumla.
=AVERAGEIFS(A1,DATE,">="&JanStart,DATE,"<="&JanEnd)
Is it possible for A1 to be linked to the named range, so if the user choses MFI in the combo box, it will change all AverageIFS formulas to look at a different named range.
View 3 Replies
View Related
Oct 8, 2013
I'm trying to add a dynamic named range to a combo box in Userform but getting this error.
Have tried several lines of code this being the last that hasn't worked . . . .
Code:
CustCBx.RowSource = Range("CustList").Value
This is the formula for the named range in sheet
Code:
='Customer Info'!$J$2:INDEX('Customer Info'!$J2:$J200,COUNTA('Customer Info'!$J2:$J200))
View 1 Replies
View Related
Jan 18, 2013
Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
View 2 Replies
View Related
Aug 10, 2014
My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.
No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.
The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)
debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.
I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.
View 4 Replies
View Related
Mar 23, 2014
First sheet has a client name and several cells of data along the same line. All of the data on this sheet is kept long term.
The second sheet is completed copied and deleted. In completing the second sheet the client name is selected of a drop down list and pulled from sheet one.
What I want to do and not sure if there is a way is that when I select a client and populate it on sheet two I would like the related data on that clients line from sheet one to populate to same named lines on sheet two.
if this is possible and if so provide a brief description of how it would work
View 3 Replies
View Related
Apr 17, 2008
"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).
2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.
Sheet 1. Info : has 9 columns. So if column = 9 and the value = new.
Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""
View 9 Replies
View Related
Mar 30, 2014
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
View 1 Replies
View Related
May 22, 2014
Is there any way to set the list from a Combo Box to automatically start in the middle?
Whenever I select a Combo Box, the drop down list always automatically starts at the top of my selected range, ideally I would like it to start in the middle.
For example my Range that I am filling the Combo Box with lists dates: Today()-7 to Today()+7.
At the moment the first item in the combo box list is Today()-7, I would like it to be Today().
View 2 Replies
View Related
Jan 31, 2008
I have a worksheet that I am using to collect information about individaul jobs. I have entered combobox's on the sheet not in a userform. I have it working well but it will not copy the combobox's to a new sheet. Here is the code I am using.
Sub Copy()
Range("A1").Select
'Cells.Select
Selection.Copy
Workbooks.Add
Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
ActiveWindow.Zoom = 85
View 7 Replies
View Related
Sep 4, 2007
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
View 8 Replies
View Related
Sep 28, 2006
Data exists in a workbook's sheet name "0293" in columns A, B, C, & D. If a row's value in column B exceeds zero, the entire row & formatting needs to be added to the bottom of data in a sheet called "Comprehensive" of the same workbook and put 0293 in column E of the same row. What would be the simplest VBA code to copy sheet 0293's data & add it to the "Comprehensive" sheet with the sheet name in column E of the same row?
View 2 Replies
View Related
Dec 8, 2009
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Dec 22, 2011
I have a workbook that contains budgets for as many as 50 divisions. I don't always know what the names of the divisions are going to be. I need a macro that will go through each worksheet and copy aa1:ao200 and paste it to a worksheet named "upload" in the next available row.
Here is something that i found here but i cant make it work.
Sub Macro4()
' Macro4 Macro
For Each ws In ActiveWorkbook.Worksheets
With ws
Range("AA1:AO200").Select
Selection.Copy
If Application.WorksheetFunction.CountA("B:B") = 0 Then
[code]....
View 2 Replies
View Related
Aug 13, 2013
If I copy worksheet in Excel, the named ranges are copied too. If I copy in VBA, they are not. Is the only solution to loop thru the named ranges or is there something smarter like some "fullcopy"?
View 2 Replies
View Related
