I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5 123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
I have spent the last couple hours compiling a large amount of data. I have a list of websites, each have a number of visits and transactions. The list is many thousands strong so i have a huge amount of data to work with but there are a lot of duplicate sites. See below, I have taken a snapshot of some of it:
I've highlighted a duplicate example.
Would it be possible across the entire data set to sum all of the duplicate rows into one. So, for the 3 shown, to be reduced to one row with 228 visits and 2 transactions?
And to do it quickly? As I could go through them manually but I don't have to time to go through 10,000 rows.
I have a workbook that has multiple tabs and need help trying to figure out how to consolidate all the data. I find myself spending hours doing this manually each day.
Here is what I have:
Workbook has tabs labeled....Wk1_Mon, Wk1_Tues, Wk1_Wed, Wk1_Thurs, Wk1_Friday, Wk1_Summary......and repeats all the tabs through Wk5....then I have a Month_Summary tab.
I have 25 users with 25 seperate workbooks each with individual information on each workbook.
I am trying to get a sum of all the data on the Month_Summary tab for each month for each user and as well as a sum of the Month_Summary tab for all 25 users.
The end result I am looking for is to get a Yearly Sum of all the Month_Summary Tabs for all 25 users as well as individual yearly summaries for each users.
I have one main Folder which contains 25 folders (one for each user). Under each user folder there is a seperate Workbook for each month.
I'm a first timer here an I'm hving a problem with data. I have 3 sheets in a workbook, I want to transfer all the data to one sheet. I have 3 columns labelled Number, Name, & Sales, on each sheet some of the numbers and names are the same and I want to be able to match them up and put the sales from each sheet into a new column, so the final sheet will have 5 columns in total, if the numbers and names don"t match I just want to add those to the bottom of the matched ones.
I have a new project that needs macro code. Your help is very much appreciated. We have a spreadsheet with duplicate accounts meaning two or three rows with the same account but different information. We want to use only one row for one account and move the new data from the same account to one row only to the right and delete the duplicates. Can someone please help me with this?I read so many post and I tried some of them but it only delete the duplicate row and not copying the new data from that row to one row only. Also, the other code I tried was retaining only the current or old data. Actually, to elaborate more, I want to get the new data in each cell of the same account in multiple row and move it in one row to the right only and delete the duplicate in that same account.
I found a lot of information on this but not what I need. I have 8 columns A - H. Column D has some duplicate numbers. I would like to find the duplicate numbers in column D (they are all one right after the other) and delete the entire row leaving only the first. I do not need to sum or anything, just delete the row with a duplicate number. If there are 2 or 3, I just end up with one.
I have an Excel Workbook with a Paid sheet and an Outstanding sheet both sheets have a File Number column.
I would like to create a macro that looks through the Outstanding sheet and if the File Number from the Outstanding sheet is also in the Paid sheet can the entire row be deleted from the Outstanding sheet.
compare and find exact matches b/w the data in columns J and K in the attached csv file. I would simply like all rows with exact matches to be hidden. I can simply change any code to reflect something like
macro that takes the number data and if it is the same number as in the previous row(s) just delete the extra number(s). It also needs to put in a factor in the next column of how many times the number was the same. For example:
with deleting duplicate entries in a spreadsheet that contains two names, a code number and a date. All rows with a duplicate number in column “B” should be deleted. Write a micro code? I have a few thousand of entries that need to be knocked out.
I've got this macro which works well, but I have to edit it to change the column I want to check for dupes. I don't mind doing that, but now I have to share the macro with someone who is not comfortable changing the references in the code every time they run it.
As it is it checks column G:G (7) for dupes and deletes the row. Good. I'd like for it to do the same thing, but for whatever column the active cell is in.
I can use this: Col = ActiveCell.Column in place of the "7" in the With Range part but I don't know how to replace the "G1:G".
Sub DeleteDuplicatesColumnG() With Application .ScreenUpdating = False .EnableEvents = False
I need to concatenate and de-dupe. I want to find dupes, concatenate a column, and the delete the duplicate columns--all while maintaining data from other populated columns.
Here is the some example data:
#| Type | Name 1 | A | Bob 1 | B | Bob 1 | C | Bob 2 | B | Sally 2 | E | Sally 3 | A | Bill 3 | C | Bill 4 | E | Nancy
The result should look like:
# | Type | Name 1 | A, B, C | Bob 2 | B, E | Sally 3 | A, C | Bill 4 | E | Nancy
Basically, I have a sheet and I would like to delete the entire row if the data in column G is the same as that in column H. The data is text if that matter. I've tried to figure out the VBA code for it, but my knowledge is severely limited. The spreadsheet is excel 2010.
I have a worksheet that has 3 duplicate values in a particular column, I need a macros that will highlight two of the duplicates row and then another macro to delete the entire row. The duplicate element are in column R. find attached worksheet.
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A 100 101 102 105 100 101 102 105
Col D 5 4 2 4 1 2 3 1
After my code is run, I need for my spreadsheet to look like this
Col A 100 101 102 105
Col D 6 6 5 5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
------- Public Sub FindDuplicates() For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row) SrchValue = Worksheets(1).Cells(RwCnt, 1).Value If Len(Trim(SrchValue)) > 0 Then With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A 100 101 102 105 100 101 102 105
Col D 5 4 2 4 1 2 3 1
After my code is run, I need for my spreadsheet to look like this Col A 100.........................
I found this sample code that works from top to bottom of a spreadsheet. But I need something that will delete the first entry and keep the last entry. My data is sent from one spreadsheet to a Master and sometimes the details can be sent twice, if the responsible person forgets to enter one line of production. The criteria should be the first 5 Columns of the sheet.
Sub Dupe_Killer() Dim str As String Dim str2 As String Dim c As Integer Dim i As Integer Application. ScreenUpdating = False Application.Calculation = xlCalculationManual Sheets("SAMPLE").Select rw = Cells(2, 1).End(xlDown).Row 'Sort Data by Date, Location & Number Range(Cells(1, 1), Cells(1, 14)).Select Range(Selection, Selection.End(xlDown)).Select Selection.Sort Key1:=Cells(1, 1), Order1:=xlAscending, Key2:=Cells(1, 2) _ , Order2:=xlAscending, Key3:=Cells(1, 3), Order3:=xlAscending, Header:= _ xlYes, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ ....................................
I'm looking for a way of keeping case sensitive data in a range of cells, before using Data Consolidate, which when merged afterwards, Consolidate removes the case sensitivity and combines the quantities into one.
Check out this simple table as an example >
A B C D E F G H
1 TEXT QTY TEXT QTY TEXT QTY TEXT QTY
2 and 3 and 2 and 10 and 5
[Code] .........
Cells A1-B7 and C1-D7 are two sets of original data, before consolidation.
Cells E1-F4 are the result of applying a Data Consolidate operation to the A1-B7 and C1-D7 ranges - note how the merged result ignores the case sensitive condition in the original ranges.
Cells G1-H7 is the post-consolidation result that I'm looking for, where the original text case is maintained.
i've got a range of data. Typically there are columns that have the same value running for a few hundred lines before it gets to the next value. What i'm trying to do is create a macro that when i select a value in a column i would run the macro and it would delete all the duplicate values until it reaches the next value but making sure it only deletes that value in that specific column.
I have a spreadsheet with a column of records (text ) from B1:B4000. I would like to delete the entire row of the duplicate record. Overall data set range is (A1:I4000). This spreadsheet may contain more than 1 duplicate record. Is there in easy fix?
I've been trying to sum merge, and delete duplicate rows in this massive spreadsheet (over 15,000 rows). Currently I've gotten to the point where the duplicate lines are eliminated but the quantity is recording the number of times the line has moved, not summing. Below is an example of what I'm looking for
I'm having trouble getting this piece of macro to work. I want to delete duplicate Id records in (Cell B12 : B124), but only those with "No" in the (Cell Z12 : Z124) will be deleted.
Table B12 Z12 ------------- E1 Yes E2 Yes E3 Yes E4 Yes E1 No E2 No E3 No E4 No
I have 2 columns A & B. A has many duplicates and B has numerical values. I would like to delete all duplicates in A apart from the ones highest value in B?
