Consolidating Folder Containing Multiple Files That Contain Same Tab Name
Aug 15, 2012
I have a folder that contains around 45 excel files, each of these files contain a tab called "corp val". (these files change name month to month e.g. Report June, Report July etc)
I am finding on a monthly basis i need to go into each of these excel files and copy the data from the "corp val" tab into a summarized spreadsheet - which i then use the data for various things.
Just wondered if there was a solution to this or will it always be difficult to copy and pasting all the data i need. I am not in anyway an advanced excel user, I am guessing this might be some form of macro in which case I am maybe better to keep doing it the way I was as I am not literate in macros.
View 1 Replies
ADVERTISEMENT
Mar 31, 2007
I have situation which needs expert advice. I have about 22 Excel files of different branches with similar data. I have to link some calculated cells from each of these files into one file to show the consolidated data. There are about 18 calculated cells in each file, so linking each one is practically impossible.
View 10 Replies
View Related
Sep 9, 2013
I would like to know if there is a way to modify multiple excel files in a folder. What I need to do is hide various columns, adjust margins, cut and paste certain columns to a different position, and change the page layout. Is all of this possible, or will I need to change each individually? If you need more information, let me know.
View 5 Replies
View Related
Apr 7, 2009
I would like my macro to go to a certain folder- in this case N:Aexeo ClientsJabre2008Excel Diet Run, open each workbook therein ( to this end I have found the first part of the code below on another thread) and perform the ExcelDietMacro (also below). I am missing something though as nothing is happening, would anyone know from a quick glance what is wrong? Should I have these as 2 seperate Sub End Subs or combined into one? I know that the Excel Diet is correct thanks to the original designer and Rory on the forum for getting it adjusted to my needs.
Also each workbook within the folder will have the same password to open, is it possible to insert some code in the macro to do this automatically?
Sub LoopFiles()
Dim MyFileName, MyPath As String
Dim MyBook As Workbook
MyPath = "N:Aexeo ClientsJabre2008Excel Diet Run"
MyFileName = Dir(MyPath & "*.xls")
Do Until MyFileName = ""
Workbooks.Open MyPath & MyFileName
Set MyBook = ActiveWorkbook
Application.Run "ExcelDietMacro"
MyBook.Save
MyBook.Close
MyFileName = Dir
Loop
End Sub
Sub ExcelDietMacro()
'
' ExcelDietMacro Macro.........................
View 9 Replies
View Related
Jun 11, 2009
I have 400ish departmental budget files in a folder that I need to upload to a Sharepoint doc library. The files in the folder will have to exactly match the files we already have set up in sharepoint in order to upload them to the sharepoint site. As it stands now there is only one consistency between the sharepoint files and the budget files in the folder, which is the department number (which every file in both begins with).
I'm thinking some sort of macro will let me insert a sheet into each of the files in the budget folder, which would have a formula that pulls the department number from a certain sheet in the file, and produce the file name I want into a certain cell. Then I would like a macro that goes into each file and renames it based on that cell. I'd like to know if this is possible and if there may be a better way to do it.
View 9 Replies
View Related
Dec 3, 2007
I would like to build an index sheet from multiple sheets in a folder(directory).
Let's say I have a folder with sheetA.xls, sheetB.xls and sheetC.xls. I would like to automatically create an "index" sheet that lists the sheet name and info from cells B2 and cell C3 all on a single row. So my index sheet might look something like this:
sheetA Portland Oregon
sheetB Seattle Washington
sheetC Reno Nevada
View 8 Replies
View Related
Sep 14, 2012
I have a folder in my D drive where I used to keep my Text files after downloading it from our support centeral. I want to Import all these Text files in one excel sheet in a way that data of each file got append in excel sheet below previous file data.I am trying to do this through FSO but unable to do the same.
View 1 Replies
View Related
Oct 17, 2007
Import Multiple Text Files & List Names
I would like to use FileDailogFolderPicker object to prompt the Excel User (me!) to browse to the location of the folder which is required to execute the code below; at the moment I have to change the file path in the VBA code each time I run the macro. The code is run on a Click Event button at present.
Private Sub GetGPCFiles_Click()
test
End Sub
Sub test()
Dim myDir As String, fn As String, ff As Integer, txt As String, a()
Dim x, i As Long, n As Long, b(), t As Long
myDir = "Y:DCCRSP07RSPWE191007131007GPC" 'Have to input this path manually
fn = Dir(myDir & "*.gpc")
Do While fn <> ""
ff = FreeFile
Open myDir & "" & fn For Input As #ff
Do While Not EOF(ff)
Line Input #ff, txt
x = Split(txt, ",")
n = n + 1
Redim Preserve a(1 To n)
a(n) = x
Loop
View 6 Replies
View Related
Mar 27, 2008
I have 100 excel files in a folder need all these files to be saved in txt format in another folder need vba code to do this
View 2 Replies
View Related
Sep 30, 2008
I would like to know how to open multiple excel files from a folder based on the information based in cells down a certain column until the last cell.
I thought it might be something like this but it isn't: ....
View 6 Replies
View Related
Aug 16, 2013
i am working with a large data set of excel files . I need to format the sheets in a specified way . i have recorded a marco that does this . I now have the problem of creating an automatic loader that opens the files , carrys out my macro , then closes the files.
For example i have a folder X that has 10 files inside it. i would like to be able to load the first file , carry out the macro, close the file move it folder y . Then look back into Folder X , take the first file it see's , carry out the macro , close the file , move it folder y , the go back to folder x and carrying out this until all the files are done and stopping when the folder is empty
View 1 Replies
View Related
Feb 7, 2014
I have two pieces of code that each work, but I am struggling to combine the two.
I started with Ron de Bruin's code to attach multiple files to an email and then found more code that will loop through a folder to attach multiple files to an email.
Essentially, I would like the structure of Ron de Bruin's code, with the ability to have folder paths in the cell range, rather than file names.
Here is the code that works to loop through a folder, but it only works when I have the paths listed in one column, not in a range (e.g. columns C-Z)
Code:
Sub Send_Indv_Files()
Dim OutApp As Object
Dim OutMail As Object
[Code].....
View 4 Replies
View Related
Jun 15, 2006
I am trying to make a program that opens a file from my hardrive, adds to a list box and allows me to send to a second box. I then want to be able to open the selected files in box 2. I have done the above except being able to open the files in the box. Below is my code can anyone help. I want all the selected files to open in one workbook, so want all files sheets to be copied into one new workbook.
Private Sub CommandButton1_Click()
If Lb1.ListIndex >= 0 Then
Lb2.AddItem Lb1.Text
Lb1.RemoveItem Lb1.ListIndex
End If
End Sub
Private Sub CommandButton2_Click()
Do While Lb1.ListCount > 0 .........
View 6 Replies
View Related
Jun 23, 2013
I have obtained a piece of code from online that runs a macro on multiple files in a single given a single folder. when i implement it though it throws a run time error 424 "object required' and point to 'Documents.Open FileName:=path & file' line of code. Is this because Dim file type is not declared?how do i fix this problem. also, im using excel 2010.A
VB:
Sub Mac()
Dim file
Dim path As String
[Code]....
View 4 Replies
View Related
May 11, 2012
I'm working on a project where I need to import 150 csv files into an Excel2010 workbook, with each csv file being on a seperate worksheet.
I would like to set up a macro to point to the folder I will have these saved in this up so that each month when I get updated csv files I can repeat the process and bring in the new data. how to create this, I'm very new to VBA?
View 1 Replies
View Related
Sep 22, 2013
For the last year I have been downloading cash register X1 and Z1 files onto an SD card. Each night's files (X1 & Z1) are stored in a new folder with the naming convention "RP + [DATE]", (EX: RP120910, [YYMMDD]). I have 265 folders! I need to go through each folder, select the Z1 file (I don't care about the X1, X2 or Z2 files) and rename each with the following naming convention: "Z1 + folder_name + .xls". For Example: Folder RP120910 contains the Z1 file named "Z1_T1729.ECR". After renaming, the file should be "Z1RP120910.xls". As the VBA code loops through each subfolder, selecting and renaming the Z1 files, I would like the new files to be placed into a new folder named "Z1Files". Note: All subfolders are currently in a directory named "RegisterFiles". I am using Excel 2010.
View 3 Replies
View Related
Mar 15, 2013
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
View 9 Replies
View Related
Feb 14, 2013
I'm a relatively competent VBA user to a macro recorder and basic editing of custom code level but fall short with writing custom code and don't have much used or proven code I can copy from.
Problem: I'd like to automate a process whereby consolidating certain information within many data files (possibly up to 500) into a single tab within a master file.
At the moment there are only a few data files which are manually consolidated by way of manual links but going forward it will increase significantly, hence the need to automate.
I need to consolidate the following 5 cells from each data file A1, A2, A5, A7, A8 (vertical) into a single row within the master file across 5 columns (horizontal), i.e. each data file will populate 1 row in the master file, one below the other. If there are 500 data files there will be 500 rows of data in the master file.
The data files will be saved in a central location on our server and the master file will sit outside this folder, possibly in a subfolder.
Something which would be handy is a link in the master file to each data file, i.e. if I click on a data row in the master file it would jump to the source data file.
View 3 Replies
View Related
Jul 5, 2007
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
View 9 Replies
View Related
Feb 8, 2009
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
View 5 Replies
View Related
Apr 8, 2014
I is it possible to convert all comma separated text files in a single folder in to excel files. But the requirement is to have 2 sheets in each new file. first to be the full file - with all columns, and in the second sheet to keep only colum A B D G H K L M O P R S T V W from the first sheet. The second sheet name must be the same as the first one but without the first "wlist_" in the name.
One more thing. The third column in the second is called "COUL". there are short letters for colors in french
can they be converted with the sort in English like it goes:
NO = B
BA = W
RG = R
SO = P
JA = Y
BE = L
VE = GY
GR = G
VI = V
MA = BR
BJ = TA
OR = O
Here is a link to the both CSV and an example excel file with the end result. In this example i haven`t change the shorts for the colors. It takes me too much time with the find and replace function. And at the moment i`m really pushed from time.
[URL]
View 9 Replies
View Related
May 29, 2014
Tried the consolidate feature, however not sure that it is what I am looking for.I am basically trying to condense several calendars ( one calendar per department in a company) into one Calendar..Each calendar has its own tab and looks exactly the same. (tab names: Clubhouse, spa, and final calendar... possibly more departments added later) Hard to explaing so I will attach the file. All I would like to do is combine all calendars into the "final calendar" and in time order if possible... example below
{Clubhouse Tab} A3 will have the time (10 am) , B3 will have the item "Meeting"
{Clubhouse Tab} A4 will have the time (5 pm) , B4 will have the item "Dinner"
[code]....
View 14 Replies
View Related
May 1, 2008
way to combine multiple rows into a single row using vba?
I have large amount of data approximately 5000 rows. I would like to combine all of the rows by DOB.
The reason why they are listed multiple times if they have multiple Benefit #'s.
Here is an example of the multiple rows of data: ....
View 12 Replies
View Related
Nov 25, 2008
I'll be as succinct as I can, and I'm sorry if this question has been answered already. I've had a look at past posts and can't seem to find anything.
My service has an Excel workbook of patient details. These details are separated across three sheets called 'Generic', 'Heart Failure' and 'Falls and Fracture Management'.
The columns in each sheet are the same. Every month I produce a single report of data from columns A, B, L, Q and R in each sheet.
I've been doing this by copying/pasting each of those columns from 'Generic' individually into a new sheet, then putting the same data from 'Heart Failure' underneath, etc., then manually deleting all rows that contain a blank in any cell.
Is it possible that VBA code can be written to do this? I don't know anything about codes; I know I could achieve the same effect with linking, but it seems that this would be unreliable.
View 12 Replies
View Related
Apr 11, 2008
I'm trying to consolidate inventory for my department. I have Part#s in (column E) of all the worksheets and the amount of the product in (column C). I need a formula that finds the specific part# (in column E) and adds up the total amounts (in column C) in another worksheet has the part#s and amounts in same column.
View 14 Replies
View Related
Mar 5, 2010
I am trying to consolidate multiple worksheets in one workbook into one master worksheet in the same workbook. Problem is though that the headings in the multiple worksheets are not excatly the same. Ie. some may have one or two additional headings (other than that they should be the same).
How can this be done or is this a manual process of headings alignment before any consolidation can be done?
View 9 Replies
View Related
Jun 19, 2012
I need to update my Workbook to do something more. I have a Workbook that contains multiple Worksheets that contain a list of items that need to be inspected with a schedule date. What I want to do is consolidate all the items that have not been inspected and put it on one Worksheet within the same Workbook. Unfortunately I can't attach my Workbook so you can see what I'm talking about. Each Worksheet has these five columns and every inspection still required to be conducted only has the CSEC, Schedule Inspection Date, and Remarks Columns filled out. I would like to scan all Worksheets to copy this data and consolidate it into a seperate Worksheet so I can print only one Worksheet as my report vice over fifty.
CSEC# | Scheduled Inspection Date | Date inspection was performed | Inspection Pass/Fail | Remarks
View 4 Replies
View Related
May 9, 2009
I got a brilliant bit of code (which works perfectly) from Bill Jelens "Excel Gurus gone Wild" which loops through all worksheets in the activeworkbook and consolidates these worksheets into one pivot table, this example creates the pivot in a new workbook, what I would really like to do is add a new sheet and create the pivot in the active workbook where I am pulling the data from can anybody help me to modify the code?
I have not added the code yet to generate the pivot
Code below:
Option Explicit
Sub bob()
Dim i As Long
Dim arSQL() As String
Dim objPivotCache As PivotCache
Dim objRS As Object
Dim wbkNew As Workbook
Dim wks As Worksheet
With ActiveWorkbook
ReDim arSQL(1 To .Worksheets.Count)
For Each wks In .Worksheets
Do Until wks.Name = ""..............
View 9 Replies
View Related
May 29, 2007
I am trying to compile a spreadsheet for my job that will find an average of all the break times and meal times that all the employees take. I have the employee list and their respective timeclock punches for the week, so I took that and found their meal and break times for each individual day, but I'm having trouble when it comes to consolidating and averaging the data. The first column lists the employees, but their names are repeated depending on how many times they punched the clock that week, and since not every punch was a meal or break, my time columns contain a lot of zeroes that aren't needed. I need a way to just average each employees' meal and break times.
View 9 Replies
View Related
Jun 26, 2008
Is there a code that will search a pre-determined folder for all .xls files containing the word "Temp", and deleting those files?
Example:
In the root of drive M, I have several Excel files. Anytime one of the original tracking logs is opened, a temp file of that log is automatically created. I would like to automatically search the drive and delete all files containin the word "Temp".
I've attached a picture of the directory tree, in case that will help. The file will always be named "PO Response Tracking - Temp#######.xls", with ###### representing a series of either 5 or 6 numbers.
View 14 Replies
View Related
