I record a macro that copy a portion of a tab to another, but when my data changes the destination get data one above the other. I think it is because instead of sending Control Donw it goes to the cell that I recorded the macro with.
I probably just need to send Control downkey....
I have a macro that I found somewhere on the net to look within a folder and list all the files of a certain file extension.
The macro to do this is in the attached example and is called 'Get_File_Names_Within_Dir_ext'.
I have created a basic userform outline, 'UF1' for the user to define:
Select File Extension
Select Folder to Search
Destination Sheet
I just don't have any idea how to sync the two.
If you type 'exe' into 'TB1_File_Extension' of 'UF1' the macro should search for '*.exe' files within the specified folder.
The search folder 'RefEdit1' box should open a windows explorer box (or some such) so that the user can select the directory in which to search for the previously specified file extension.
'TB2_Destination_Sheet' is a text box for the user to type the sheet within the workbook in which to list the files found within the specified directory.
'CB1_Find_Files' should activate the macro to find any files for the specified criteria.
There is also a Button 'Find File Types' in Sheet1 of the file which should activate the userform 'UF1'.
the below macro choose the row number that is entered into textbox on a userform
frmUnHide
I am venturing off on to my 2nd Macro Formula. This one is a little different than my first and I am not sure where to start, to correct the piece I am missing. I am able to create the basics, I have added the "Last Row" formulas. The piece I am missing, when I control end & "paste", it is pasting on the last row with content. I need it to paste to the row BELOW the populated content. Here is my current smaller sample of what it is doing.
Sub Macro2()
'
' Macro2 Macro
[Code].....
I am trying to build a macro to insert a row or two rows under an existing row if a formula returns a '2' or a '3' in the first cell of the existing row. This is what I've come up with so far and the first bit works fine but when it comes to inserting the rows it just spirals out of control, inserting never-ending rows.
Private Sub Labels1_Click()
Columns("A:A").Select
Selection.Insert shift:=xlToRight
Range("A3:A2000").Formula = "=ROUNDUP((Q3/300),0)+1"
With Sheets("Sheet1")
' Test Condition 1
For Each c In Worksheets("Sheet1").Range("A3:A2000")
If c.Value = 2 Then
c.EntireRow.Select
Selection.Insert shift:=xlDown
End If
Next c
I am looking for code that will start a macro by counting in seconds prior to an event according to it's due time.
Cell Value A4, A12 A20,( more could be added, depending on how many workers are present at the office at the time)
So if worker A is due to start a task at 1.00 pm, then 45 seconds prior to that event the worker can be notified.
( Cell Values A4 and D4 )
Then there are multiple tasks to be performed and each task is reminded in seconds after or before the set times the events ( Act) is due to start.
The code would keep checking every 1 minute for a new list of events between the hours of 9-5 (Variable)
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
Just want to know if is possible control a popoup window through a VBScript Macro in excel? I don't know if I could click a button from a PopUp when it appears? I mean I cant go forward because a popup message appears and I dont know how take the control of it.
I mean how can the parent window take the control of the child window (popup window)
I have many Form Control Check Boxes that all link to another sheet on row 3.
I have many changes to make but only want to implement the change related to the check box.
This code works perfect when you manualy type true or false on row 3 but not if the check box makes the change.
Private Sub Worksheet_Change(ByVal Target As Range)
ThisCol = Target.Column
If Target.Row = 3 Then
RESULT = MsgBox(Cells(1, ThisCol) & " = " & Cells(3, ThisCol), vbOKOnly, "CLICK RESULTS")
End If
End Sub
Why does this not work when a check box changes the value in row 3?
the macro simply copies a master sheet, then re-organizes/re-sorts the raw data in the new sheet. At the end, I'm trying to set a print range to 1 page wide and inifinity pages long, figure out where the end of the fourth page is, then reset the print range to accommodate four pages. In case it matters, the macro starts with a form that allows the user to input a company ticker and name used in output.
The problem is that when I use the debugging step function (very tedious), it works perfectly. But when I run it normally, it locks up for about 30 seconds when setting the print range to 1 page wide, and cuts off the print range vertically at just over 2 pages tall. Brief explanation of a couple variables:
ColLetter is a function as follows:
Function ColLetter(ColNumber As Integer) As String
ColLetter = Left(Cells(1, ColNumber).Address(False, False), 1 - (ColNumber > 26))
End Function
ActiveSheet.PageSetup.PrintArea = "$A$1:$" & ColLetter(j + 3) & a + 7 .............................
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
View 9 Replies View RelatedIs there a way to call a subroutine anytime any control is changed within a userform?
For example,
I have a userform that needs to go through and add/multiply almost every value in every textbox and also add together values associated with checkboxs. I need this to happen anytime a textbox value is changed or a checkbox is checked.
So I have a sheet with a lot of formulas and form control buttons that have been assigned macros.
When I go to protect certain cells and lock them and the activate sheet protection, suddenly my form control buttons with the assigned macros don't work.
I still need to protect some cells with formulas and don't want to leave the whole worksheet unprotected, but in order to allow the form control button macros to run, it appears that's what I have to do....or, is there another way to do this?
Can Active-X control button macro be placed in a regular module, or does it always have to reside in the sheet module?
Or is the only way to accomplish this is to have the macro in the regular module being called from the button macro in the sheet module?
I somehow seem to remember a way to move/assign an Active-X ControlButton macro to a regular module, but maybe I'm wrong?
I have a bunch of Option Buttons in a worksheet whose properties i need to change by running a macro. For example, I created an OptionButton1 in a worksheet using control toolbox. Now I want to run a macro to change it's name, groupname, linkedcell and caption. I did this macro but it doesn't work:
Sub Label()
Dim Code1 As String
Dim Link1 As String
Dim Form1 As String
Dim GroupName1 As String
Dim Caption1 As String
Worksheets("Section1").Select
Form1 = "OptionButton1"
Code1 = "FButton1"
Link1 = "FLink1" 'Defined in worksheet
GroupName1 = "FGroup1"
Caption1 = "Choose Function 1"
With Worksheets("Section1").Form1
.Name = Code1
.LinkedCell = Link1
.GroupName = GroupName1
.Caption = Caption1
End With
End Sub
I have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.
I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.
I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).
How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])
View 3 Replies View RelatedI am not the best at this, but we recorded a macro and we want to delete whole rows after we 'control' find something from a specific column. WHen we recorded our macro, it finds the first instance and we hightlight the whole row and 'control' 'shift' 'end' and delete all of the rows. We did this because we sorted and made sure the information we wanted to delete was at the bottom of the worksheet. we realized that each day the spreadsheet we pull from an ip address gets bigger and the row that we started from to delete starts on a different row each day. How do we get all the information to delete everyday, even when the row that Owned starts on changes? ...
View 9 Replies View RelatedI have an excel sheet and I want a Msg pop up to show a certain amount from a specific cell. So if the cell shows $100. I want to a do a macro that if I hold control + shift + a I will get a pop up saying "Your amount is (value of the cell).
I can only get it to work if I want the vale from an active cell.
MsgBox "The value in the active cell is " & ActiveCell.Value & "."
"How to create a 'main' macro to control other macros within a workbook". I have my individual macros created. There's one macro for each sheet that searches online data and returns the information. I have one of these per sheet (a total of 20 sheets) since I couldn't find a way to have all 20 macros be on one sheet and still work. My trouble is that whenever I'm on my 'main' sheet and try to run the macro which applies to a 'secondary' sheet, I get an error. I have to select the sheet first, then run the macro and it works. Below is the macro on each sheet.
VB:
Sub Holding1()
Dim DataSheet As Worksheet
Dim EndDate As Date [code].....
I created some excel 2003 spreadsheets to use for Fire/Police dispatchers. I have a series of yes/no option buttons that were created using the control toolbox. I have a macro that clears all the blanks where text is added, but want to add a line that clears the option buttons also.
View 14 Replies View RelatedI have never written or used a macro before and I have a simple macro task to complete:
I have Column L (L4:L10) of seven scroll bars that move according to number changes in column F (F4:F10). I want to create a form control command button that resets the changes on the scroll bars according to static column of numbers in Column E (E4:E10).
I don't know if it matters, but I'll add that I plan to add a second button that does the same thing with a different column of data. I assume I'll simply replicate whatever procedure I use in the first button - is this okay?
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End
b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
Has anyone out their ever seen an Calendar type of control totally built in an Excel vba UserForm?
My problem that I’ve tried to resolve for some time is utilizing some type of pop-up calendar to eliminate format issues in my published Excel forms. I have tried a number of calendar controls but all have to be registered on the local machine and this cannot be guarantied for every machine.
If someone could direct me to a vba UserForm that has this built in that might do the trick. Or is their another way to deal with this?
I have 2 macros: 1 controlled by a checkbox activex (PA_03) and the other a combobox (PA_03_rows) in a worksheet. I display the results from PA_03, and the user than then increase or decrease the number by using the combobox. But when I change the value (PA_03_rows.value = x) it causes the macro to jump to the macro.
I don't think it did initially, but it does now. According to another post, I saw it shouldn't do it! Is there something I'm just not seeing here?
Private Sub PA_03_Click()
Dim message, title, default, numberRows
Dim PA_rows As Integer
Application. ScreenUpdating = False
TakeFocusOnClick = False
Worksheets("sheet1").Select
ActiveSheet. Range("a15").Select
If PA_03.Value = True Then Goto Unhide:
If PA_03.Value = False Then Goto Hide:
Unhide:
message = "Enter the number of input rows required (1 to 50)"
title = "Non-Featured Standard Input"
default = "1"
I have added a control (a check box), it has called itself "Check Box 1", can I change it's name? Reason I want to do this is that I am using a macro to clear the check boxes, and therefore using a loop and I want the next control to be 5, not 12.
View 3 Replies View Relatedin cell f4 and cell i4. i have dates formatted to ..... e.g F4( 23/03/10 ) and I4 ( 06/04/10 ). in cell h9 i would like to return the answer ( 23/03 - 06/04 ). i am currently using this formula
View 2 Replies View RelatedI am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?
View 14 Replies View RelatedI'm trying to make it so that when a user clicks on a certain cell, a calendar pops up so they can pick a date. This seems like a pretty common thing to want; I hope Microsoft puts it into the next release.
Anyway, I've read the tutorial found at [url]which tells you how to create a userform, add the calendar control to it, etc.
I've also modified it so that the calendar comes up when the user clicks on a certain cell, and so that the form closes when they choose a date.
I had to use the selection_changed subroutine to tell if someone clicked on the cell, but there are some flaws.
First, moving over to the cell with the keyboard arrows brings up the calendar (undesired result; I only want it to come up with clicking)
Second, if the cell is already selected, clicking it doesn't bring up the calendar since the selection didn't change (also undesired; I would like the form to come up whether the cell was previously selected or not).
There are a few aspects of the UI I'd like to control in
1. Is there a way to force Excel to select nothing? After a sort by macro, Excel leaves the sorted range selected. I can set it to select a specific cell every time, but I'd rather have no cells selected at all.
2. Can you programatically hide the Formula Bar, Gridlines, and Headings?
3. Can you programatically collapse the Ribbon? (Excel 2007 only, of course.)
The last two are intended to maximize the screen real estate dedicated to the body of the spreadsheet, and I'd like to do it in code so that I don't have to describe how to do it to less skilled users.