Convert Column Of Time To Text Value
Jul 23, 2012I'm wondering how to code the conversion of a column (columns A, D, E and Q) from an Excel time to simple text. ie. time formatted 3:45 pm to text 3:45 pm.
View 9 Replies
ADVERTISEMENT
Convert Text To Value For Time
Jul 3, 2009I have a cell with 6:44:04AM as a text, and I need to convert it to number, so far I have tried: =timevalue(a1). no luck, it returns, #value!
Tried to replace AM and PM with nothing, it convert it to number, but changes the value 12:50:30 AM gets converted to 12:50:30 PM. I even tried copy, paste special, vaues, nope, nothing.
Convert Text To Time Format
Mar 5, 2014If I had the below in a single cell what formula would I need for it to read just the 30mins in another cell in a time format?
17:30:00 + 00:30
Convert Long Date And Time Text To Value
Oct 4, 2013I have a long date and time text value in a cell such as "2013/10/02 07:43:39.39", where the fractions of a second are very important.
I can use cdate([text]) to convert the text string to a value, but only if i omit the seconds fraction: "2013/10/02 07:43:39".
Otherwise i get a type mismatch error.
Is there any way i can get the whole date/time string converted to a date value? The only way i can think to do it it at the moment is to convert the date/time, then divide the seconds fraction by 86400 and add the 2 values. Is there a better way?
Secondly, i have a large number of these date strings, typically >30k lines x 7 columns. Each string is preceded and trailed by a [space] character.
I can strip these extra spaces no problem. And, i can "loop" to perform it, again no problem. But it's going to take time to perform and i'd rather not if i can avoid it.
Convert Date & Time As Text To Real Date & Time
Apr 22, 2008I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedConvert Hourly Time Series Data From Rows To Single Column
Jan 8, 2014I have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.
If I were to do it manually 365 times, the macro would look like this:
Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)
repeat for rows 2-365
Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.
Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long
Set rng = Worksheets("Sheet1").Range("A1")
[Code] .....
Convert Column To Text?
Mar 17, 2013how to convert the column to text. For Eg: i have column like
4352
2356
0012
0452
so i want in single row like..4352,2356,0012,0452...
Macro To Convert Text To Column?
Jul 10, 2013I am facing difficulty in creating a macro which will convert column A text into 2 separate columns (A & B) with tab & colon as the delimiters.
View 8 Replies View RelatedConvert One Column Of Addresses Into Three Columns When Text To Be Grouped Is Not Even
Jan 10, 2014I have checked to see if this has been answered before and can not find an exact reply. My problem is that I have a combined column of address: Suburb, State, Postcode - which needs to be broken into three which not be done accurately using tet to column or fx - left mid or right. The issue is that the Suburb could be made up of one or two Words with a space between. So I can not separate using text to columns as in some cases the suburbs comprised of two words will put the second word in the "state" column. It can also not be done using Left, Right,Mid, as they number of characters differs in each line. example problem with columns to text.jpg
COMBINED ADDRESS SUBURBSTATE??POSTCODE??POSTCODE??
ALTONA NORTH VIC 3025ALTONANORTHVIC 3025
BONDI NSW 2026 BONDINSW 2026
WOOLLOONGABBA QLD 4102WOOLLOONGABBAQLD4102
TOOWONG QLD 4066 TOOWONGQLD 4066
NOVAR GARDENS SA 5040NOVARGARDENSSA 5040
How To Convert A Text From One Column To Another Column In A Different Way
Apr 26, 2014I need to convert a text from one column to another column in a different way.
is there any automated way or function to convert
this - >This Text format to url format
into
this - >this-text-format-to-url-format
Convert From Text To Column And Paste The Converted Data In Other Sheets?
Apr 18, 2014I want some vbs code on my 'Copy All' button in Email Data sheet which will do my work. Its a bit lengthy but who knows the concept will find it easy.
I have one sheets -
Sheet attached - Worksheet .xlsm
Workshet.xlsm [Data in 'Mod' sheet i)should convert from text to column and paste in 'Row Data' sheet ii) then transfer form Row Data sheet to 'Email Data' sheet 'Mobile Data' sheet and 'Other Data' sheet when Copy All button is clicked in Email Data sheet.
There should be some logic which will fetch appropriate date from 'Mod' sheet to the respective sheet . We can have some kind of logic like
If 'Register' found then take the value of register and workstation and paste in Email Data sheet.
All data below should be fetched from Row Data sheet which is blank now and will get the data when we click the Copy All button ,
1st Register Count:
Below Register Count (*) i.e. 16 If workstation count present copy to E15 in Email Data sheet in Table B
Below Register Count (*) i.e. 9 If register count present copy to E16 in Email Data sheet Table B
2nd Register Count:
Below Register Count (*) i.e. 8942 If workstation count present copy to C15 in Email Data sheet in Table B
Below Register Count (*) i.e. 2883 If register count present copy to C16 in Email Data sheet in Table B
3rd Register Count:
Below Register Count (*) i.e. 0 If workstation count present copy to E18 in Email Data sheet in Table B
Below Register Count (*) i.e. 1 If register count present copy to E19 in Email Data sheet in Table B
4th Register Count:
Below Register Count (*) i.e. 98 If workstation count present copy to C18 in Email Data sheet in Table B
Below Register Count (*) i.e. 999 If register count present copy to C19 in Email Data sheet in Table B
Substr:
B32:B44 will be pasted in C29:C41 in Email Data sheet in Table C
i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
B50:B62 will be pasted in B29:B41 in Email Data sheet in Table C
i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
Convert The Time In Column "L" To A Decimal
Jun 12, 2009I have this spreadsheet attached I'm trying to convert the time in col L to a decimal. I keep getting a #value error I have tried a bunch of formula's but it always the same error The report is generated off our AS400 network but it is in excel format?
View 2 Replies View RelatedConvert Regular Time To Decimal Time
Sep 19, 2005I need to convert regular time to decimal time. example regular time in A1
is 1:38 I need that number to be converted to decimal time = to 13:63. add
12 to the hour and divide 38 into 60 to get the minutes. Our time clock
prints on a 12 hour basis and I enter to excel in decimal time.
Convert Standard Time In Military Time
Jun 21, 2007I need a simple formula to convert standard time (1:05pm) into military time (13:08).
I've read through several posts, but all I've found is reformatting or time subtraction type information. The reformating works to an extent, it gives me the hours in military but the minutes stay standard.
Basicly, all I need is:
Cell A1 = 1:05 p
Cell B1 = formula that shows/converts 1:05 p as 13:08
Convert Number To Time & Decimal Time
Oct 8, 2007I need to separate a list of times from a telecommunications bill. I have 170,000 line of data.
The Times are represented as below.
eg
46 46 Sec
59 59 Sec
100 1 Min
159 1 min 59 sec
200 2 mins
502 5 mins 2 sec
1256 12 mins 56 sec
3456 34 min 56 sec.
How do I separate them to a decimalized per min value.
Convert Time Value To Correct Hh:mm Time?
Jul 25, 2014I have a row of cells, and some of which are displaying time, but in an incorrect format.
for example 15:20 is showing in a cell as 3.2
How can I create a new cells that basically converts 3.2 into 24 hr hh:mm ....e.g. 15:20?
If I got to use the format cells option, and hh:mm, it changes the cell to the completely wrong time (i.e 04:48) ?
p.s. I should state that "some" of the cells are kind of showing the correct time, albeit with a decimal instead of a colon, for example, cell A12 is showing 4.25
one other thing I should mention.....the times will always be PM...... so 3.2 should be 15:20, and not 03:20
Convert Each Column Of An Workbook File To New Text File
May 30, 2007I want macro which export each excel column to new text file. The data in excel file is number. The column has only 5 rows that means each new text file should contain five lines of one column. It looks simple but couldn't manage to do macro for it. I have very big data set in one excel file, and have to be splitted into text files. The file name in new text files can be any kind as long as it can be in some sort of order for each export.
View 2 Replies View RelatedExcel 2007 :: Time Difference Calculations And Automatic Insertion Of Text In Blank Column
Jan 4, 2014Please find attached a daily copy of a spreadsheet that is used to monitor train running times.
The columns on the left - "Serv No, Serv Start Date,Train No:, Scheduled Arrival, Scheduled Depart" are provided to us automatically and the underlying cell formatting/formula cannot be changed. This information is cut directly from a daily report sent to us the previous day. The cell formatting for the start date is custom - dd-mm-yyyy hh:mm.
The sheet is usually locked out with user access only to the left hand side to cut and paste train times in and the input columns on the right hand side. User has no requirement to adjust any details in the left had column apart from to add additional trains at the bottom is need be. I have left the loaded sheet blank and complete with all underlying cell formatting, conditional formatting and formulas intact for you to play with.
Both sheets essentially do the same thing so whatever formula changes are made to the empty sheet can be adapted for the loaded sheet.
For simplicity, I will focus on the empty sheet. What I am mucking around with is having the user input the train arrival time in the "Actual Arrival" column - (column F)
What I am looking at then making occur is the spreadsheet automatically filling the adjacent columns with the appropriate text and calculations.
To do this excel needs to compare column the number (cell input is text formatted) as a number with the arrival time in column G. It then needs to calculate if the train is Early (16 minutes or more before scheduled arrival), on time (+/- 15 minutes either side of scheduled arrival) or late (16 minutes or more after scheduled). It then needs to automatically place the letter "E", "O" or "L" in column K and the time differential in column L.
My problem is two fold.
Firstly, I cannot seem to make the spreadsheet automatically enter a letter into column K depending on the above conditions.
Secondly, I have had limited success in having the spreadsheet compare column J with column F and working out the differential. However, this only works if the time remains linear. IE only if the train runs on time or late. It gives an incorrect time differential if the train is early. I will attach this spreadsheet tomorrow as an add on to this post.
DAILY TRAIN RUNNING.xlsx
Time Conversion: Convert A Time From Hours/Minutes To Hours/Tenths
Oct 10, 2009When I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies View RelatedConvert Imported Date / Time Data To Date / Time Format?
Jan 2, 2013I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedConvert Column B As Multiple Column Titles And Move Data In Column C Into New Columns?
Jun 30, 2014I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
Excel 2013 :: Extract Date And Time Info From A Text Cell That Contains Text And Date And Time
Jul 19, 2014I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
Convert Array Into Text And Remove Duplicate Entries From Text In Cell?
Jun 12, 2014I have the following two columns, and would like to obtain for each individual Company, the corresponding Country values excluding duplicates as text in a single cell.
Company 2Country B
Company 2Country C
Company 3Country C
Company 3Country C
Company 5Country A
Company 5Country C
Company 5Country C
For example:
- For Company 2, a cell containing "Country B, Country C"
- For Company 3, a cell containing "Country C"
- For Company 5, a cell containing "Country A, Country C"
I've approached generating an array using an IF statement, as in =IF(INDEX(A1:A8="Company 5",,),INDEX(B1:B8,,)," "), which returns the following array: ={" ";" ";" ";" ";" ";" ";" ";"Country A";"Country C";"Country C";" ";" ";" ";" "}.
The question is: how do I get that array to produce, as text in a cell: "Country A, Country C". Note that the duplicate Country C has been removed.
There are a few "StringConcat" User-defined functions that I've found elsewhere on the internet, but they don't seem to be able to handle to conditionally generated IF Index array, which I would think is key to parsing between Countries corresponding to each Company in the list.
Macro To Automatically Convert PrtScr Image Based Text To Real Text In Cell
Mar 22, 2014Programming Excel VBA Macro to do OCR (text recognition) from a prt scr screen capture image and input the text into cells. Currently my Excel file has a push-button, and upon clicking on it the macro pastes into Excel the current clipboard image I have created by pressing prt scr while in another program. The macro then crops the image to the region with the applicable text. I have to then manually type the text I see in image format into the appropriate cells.
the VBA coding to automate this? I'd like it to use the clipboard image and run it through OneNote OCR, after which the applicable text values are automatically entered into the cells. Ideally the code will first crop to the region with the desired text before it does OCR. If this is not feasible, it will need to incorporate a method (keyword search?) to hone in on the desired text after the entire prt scr image has been OCRed.
Time Format / How To Convert 10:9:8.13 To 10:09:08.013
Nov 29, 2013I'm trying to sort a dataset that contains time stamps: each line is an event with a timestamp containing milliseconds and no leading zeroes:
if I sort, I get this result:
10:0:18:507
10:0:18:640
10:0:2:414
10:0:20:271
10:0:21:651
10:0:21:693
10:0:22:131
10:0:22:70
which is wrong on so many levels...
how can I correct this?
I wanted to convert to milliseconds but how to extract text relative to the delimiter ":"
I tried custom format, but Excel won't accept the formats I proposed "hh:mm:ss:000", "h:m:s:000", "00:00:00:000" it's all for the cat.
Convert Number Into Time?
Aug 30, 2013I exported a report from Crystal to Excel. The times came over as numbers. How do I convert the numbers into time.
Example: 753 to 7:53
1426 to 14:26
How To Convert Time To Seconds
May 8, 2012Time conversion in Excel and nothing worked.
This is my problem: I have a series of data written as following 0:05 (minutes:seconds) BUT in Excel the cell format was set as h:mm. Thus 0:05 is supposed to be 5 seconds but Excel reads it as 12:05:00 AM.
I need to convert everything to just seconds (i.e 0:05 = 5).
Convert The Time Values
Oct 10, 2008Is there some way to write a formula that would convert these time values (usually in a HH:MM:SS format) into a "minute" value (by rounding 30 seconds or more up to an additional "minute" as well as multiplying each hour by 60 minutes which will all be added to the MM or "minute" format for a grand total of how many minutes were involved with each transaction)?
When I try to re-format the data it changes to a date/time format which makes no sense.
Here is a sampling of some of the data I am trying to calculate:
:04:41
:39:15
:07:53
:28:45
:04:10
:20:20
:02:17
:16:47
:14:56
:38:59
:17:49
:32:49
:51:20
:07:02
:08:26
:07:57
01:29:08
:15:15
:11:25
:04:15
:30:37
:47:09
Convert Time To Decimal
Jun 12, 2009I am trying to convert time (formated as hh:mm) to a number with 2 decimal places.
Example
A1 7:51
B1 - want the number to show 7.85
Will then multiply this by an hourly wage to get total $ paid.
Convert Value To Time & Cumulate
Aug 13, 2006if a1 has a value of 60 then b1 will read 60m minutes
if a2 has a value of 120 then b2 will read 180minutes ie a running total of a1 +b1. i need the time in the column b to keep on accumalating even if i delete the value in a1. ie if a1 is deleted b2 will still say 180 minutes