Is it possible to convert the following data to an Excel-recognized time format (easily, as I have numerous million-row files with time data like this). Some actual data is below with what it should be in parentheses.
0 (00:00)
1 (00:01)
13 (00:13)
57 (00:57)
145 (01:45)
308 (03:08)
900 (09:00)
1123 (11:23)
1334 (13:34)
2332 (23:32)
I need a simple formula to convert standard time (1:05pm) into military time (13:08).
I've read through several posts, but all I've found is reformatting or time subtraction type information. The reformating works to an extent, it gives me the hours in military but the minutes stay standard.
Basicly, all I need is:
Cell A1 = 1:05 p
Cell B1 = formula that shows/converts 1:05 p as 13:08
Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value? eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm. Other than creating a table and using a vlookup function
View 3 Replies View RelatedHow to convert decimal numbers which represent minutes into time format? Like this
Sheet3 GH1MinutesTime212.9729729700:13:00325.9459459500:26:004116.756756801:57:00
how to convert the JD Edwards Julian date format into standard Gregorian date, and can it be done using VBA? Note that the JD Edwards Julian date is different than the standard Julian Date and uses 6 digits instead of 7.
View 7 Replies View RelatedHow do you convert decimal time to standard time?
....Hrs
A1 21.70
A2 7.20
A3 37.38
I know 1.5 is 1:30 but I don't know the formula.
How I could convert military time to standard time? The format is HourMinuteSeconds.
For example, in column C, I have something like
92412 ---> So this is 9:24:12 AM
152209 ---> So this is 3:22:09 PM
I just want to change the format from military time to standard time so that I can do a sort.
I'm getting a time data on the format "0h 00m 00s" but I can't convert it to a standard "00:00:00" format to properly handle it and I'm not so Excel savvy. I already tried looking for something on google but the formulas for similar issues "0h 0s" or "0d 0h 0h" are not working (I can't find a way to adjust them). For example: I'm have the following data on G3:
0h 37m 52s
and I'm using the following TIME/FIND formula:
=TIME(FIND("h",G3),FIND("m",G3),FIND("s",G3))
but the outcome is "2:06:10" instead of "0:37:52"
I have a file, and I want to put in the standart deviation, over 100 points a time. So =C2:C102, next will be C3:C103 etc, but only if there are values in the Easting column. I ID the columns, but something is wrong about by code, it put's like $ for the row and column.
View 3 Replies View RelatedIn my stock list I am trying to now sort non standard formats of numbers. They are electronic values starting fro "0R", "1R2", "1K", "1k5" and then onto numbers like 1M and 1M6
How do I set up a sort into ascending oredr numbers like this
An age-old controversy has resurfaced in our lab regarding the calculation of a mean and standard deviation of a set of two numbers. There have always been those who say that you can't have a standard deviation of two numbers, but now someone has said that a mean of two numbers is meaningless (no pun intended). What is the current thinking on this? Of course, mathematically speaking, you can certainly calculate these values with only two numbers, but is a mean of two numbers not considered a valid measurement? How about a standard deviation?
View 2 Replies View RelatedI'm copying data from another source to excel, and for certain date entries they come as text in the following format "On 14 May at 8:00". Is there anyway to convert multiple entries like this into a standard date format? With or without time is fine - just the date will do.
View 4 Replies View RelatedI want to calculate standard deviation for about 5~22 cells (number is not the same every time) in a column before "#N/A" appears after the last valid number. How can I do that?
Example:
3.2
4
2
2.1
.
.
.
3.2
2.4
2.5
#N/A
I am trying to design a function that grabs an average of only numbers that are within a certain deviation of the mean. I got the plan down, and have done this before without VBA, its just a user defined function will be much quicker.
The gist of what I am doing: Find the standard deviation of a range and then only find the average of numbers that fall within n deviations from the mean. I am stuck with the part that I would normally use an array code for. Here is what my array would look like:
{=AVERAGE(IF((nums>high)*(nums
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
I have been looking through the forums and found the below code, but I have both text and numbers in the same range. I have attached an example of what I need to have converted.
Book1.xlsx
See attached file. A colleague is downloading rows of data from a website which contains a number field Excel is currently treating as Text after being pasted in. My spreadsheet includes just a sample of the many rows of data however as you can see the VALUE function refuses to convert these text values to numbers. How these might be converted and why the VALUE function refuses to work in this case?
View 5 Replies View RelatedI need to convert regular time to decimal time. example regular time in A1
is 1:38 I need that number to be converted to decimal time = to 13:63. add
12 to the hour and divide 38 into 60 to get the minutes. Our time clock
prints on a 12 hour basis and I enter to excel in decimal time.
I need to separate a list of times from a telecommunications bill. I have 170,000 line of data.
The Times are represented as below.
eg
46 46 Sec
59 59 Sec
100 1 Min
159 1 min 59 sec
200 2 mins
502 5 mins 2 sec
1256 12 mins 56 sec
3456 34 min 56 sec.
How do I separate them to a decimalized per min value.
The back story is that from a system we use, when you download data from inside it, Excel treats most of the cells with a "Number Stored As Text" error. I had problems with this and it was just generally annoying so I wrote the below macro that converts each of the cells back to general cells and reinputs the data, essentially reseting the cell and keeping the data. Being that this is a loop, it takes a good while to run if alot of data was downloaded. Any idea's on how to speed it up besides screen updating? Note, other stuff happens in the first macro, but it is just cosmetic non-intensive things. It calls the second macro because I wanted them seperate should I want to just run the second.
Sub CleanData()
Application. ScreenUpdating = False
' Find the Right most cell and the Bottom most cell and
' run the macro from A1 to this cell recursively
Range("IV1").End(xlToLeft).Select
Col = Selection.Column
Range("A65536").End(xlUp).Select
Row = Selection.Row
Range("A2").Select
Range("A1", Cells(Row, Col)).Select
Application.Run ("FixTextAsNumberError")
Application.ScreenUpdating = True
'
End Sub..............
I have the following two macros that I use daily:
Public Sub add_tick_marks()
Dim c As Range
For Each c In Selection
If Not IsError(c.Value) Then
If Left(c.Value, 1) <> "'" And c.Value <> "" Then
If InStr(c.Value, "E+") > 0 Then
c.Value = "'" & c.Formula
Else
I use these because I frequently copy billing account numbers that have leading zeros from some proprietary software and work with them in Excel. I need the leading zeros to facilitate VLookUp's. When I paste the data into Excel it truncates the leading zeros. My typical procedure is:
1. Copy a column of values from our proprietary software
2. Paste it in Excel (Ctrl+V)
3. While newly pasted data is still selected I hit Ctrl+1 which brings up the Format Cells form.
4. I double click "Text"
5. I re-paste into Excel (Ctrl+V)
6. I run my macro to add tic marks to the values so the leading zeros never get lost.
The problem occurs when I copy multiple columns of data and paste it in Excel. If one of the columns of data contains numbers or currency then I select that range of values and run the macro to get rid of the tic marks. After running the macro the numbers are still treated as text. When I select a range of those values and right-click on the status bar and select " Sum" there is no value. No big deal, I just highlight them and format the cells as numbers or currency. But after formatting them as numbers or currency, they retain their format as text until I click in the formula bar for each individual cell and hit enter, at which time they take on the number or currency format I have chosen and the sum can then be displayed in the status bar.
How can I force the formatting I chose to take effect on the data immediately without me having to individually "fake change" the data in each cell?
I have text as numbers downloaded to excel sheets from crystal that i need to add together on a summary sheet. I've tried using Value, TRIM and CLEAN functions to no avail. the TYPE function is reading the cell as Text and I have also tried multiplying by 1. Does anybody know how I can get around this ? hopefully I've attached an extract of the file
View 4 Replies View RelatedI have a row of cells, and some of which are displaying time, but in an incorrect format.
for example 15:20 is showing in a cell as 3.2
How can I create a new cells that basically converts 3.2 into 24 hr hh:mm ....e.g. 15:20?
If I got to use the format cells option, and hh:mm, it changes the cell to the completely wrong time (i.e 04:48) ?
p.s. I should state that "some" of the cells are kind of showing the correct time, albeit with a decimal instead of a colon, for example, cell A12 is showing 4.25
one other thing I should mention.....the times will always be PM...... so 3.2 should be 15:20, and not 03:20
A client buys 500 minutes of my time. In one week I spend 340 minutes on the account. I'd like a column to show Time purchased (say 500 Minutes) Time spent and a final section showing time left (but showing negative values in red)
I hope I've explained this ok but here is an illustration of what I'm trying to achieve in Excel 2011.
[URL] ...........
When I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies View RelatedI have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedI have a workbook full of six digit numbers that I need to manipulate but can't. They have been data-dumped from a server and copied as non-numeric values.
I have tried EVERYTHING I could find on how to convert these column cells to numeric fields:
Multiplying by 1 - didn't work
VBA Code - For Each xCell In Range("a1:a1012")
xCell.Value = xCell.Value
Next xCell -didn't work
Format Cells as numbers - didn't work
Format Cells as general - didn't work
Remove Spaces - didn't work
Text to Columns - didn't work
This is how the data is stored.
000216 000703 000744 000819 002184 002529 002571 002573 002783 003222 003645 003826 004034
I need to create a formula to convert the number into millions. I want to do this in the format cell >> Custom in the excel sheet.
Suppose the number is 2000000 the it should show as 2.
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedI have a cell with 6:44:04AM as a text, and I need to convert it to number, so far I have tried: =timevalue(a1). no luck, it returns, #value!
Tried to replace AM and PM with nothing, it convert it to number, but changes the value 12:50:30 AM gets converted to 12:50:30 PM. I even tried copy, paste special, vaues, nope, nothing.