How I could convert military time to standard time? The format is HourMinuteSeconds.
For example, in column C, I have something like
92412 ---> So this is 9:24:12 AM
152209 ---> So this is 3:22:09 PM
I just want to change the format from military time to standard time so that I can do a sort.
I need a simple formula to convert standard time (1:05pm) into military time (13:08).
I've read through several posts, but all I've found is reformatting or time subtraction type information. The reformating works to an extent, it gives me the hours in military but the minutes stay standard.
Basicly, all I need is:
Cell A1 = 1:05 p
Cell B1 = formula that shows/converts 1:05 p as 13:08
I have 4 distinct columns.
Adm Date Adm Time Trans Date Trans Time
1/16/2014 937 1/16/2014 1045
1/1/2014 121 1/1/2014 121
1/14/2014 800 1/11/2014 735
1/30/2014 100 1/30/2014 205
1/13/2014 800 1/12/2014 1202
I would like to calculate the difference (# hours spanned from the dates shown). Unfortunately when we transfer the data the COLON is dropped from MILITARY TIME so I am having problems in the calculation. This is also made more difficult as some of the calculates span over two dates.
I'm trying to calcuate the time difference using military time.
For example:
A1 has 0400 A2 has 0430 A3 SHOULD be :30
B1 has 1500 B2 has 1715 B3 SHOULD be 2:15
Unfortunately I either keep getting all zero's, or the correct answer but without the ":" in the answer (b3 would look like 215)
I have a column of numbers formatted as general. The data represents military time. When I try to change the format to time, the output is 0:00. How do I convert the existing data to time data IN THE SAME cell the existing data is already in? Is this possible? I have 26,000 lines of data I have to apply this to.
View 9 Replies View RelatedHow do you convert decimal time to standard time?
....Hrs
A1 21.70
A2 7.20
A3 37.38
I know 1.5 is 1:30 but I don't know the formula.
I have four columns. In the first one I want to keep my START time (in format of military time), in the second column I have STOP time, in the THIRD column I have TIME USED in other words it is a DIFFERENCE between STOP and START and I used this formula for that: =B2-A2 and it works.
Now in the FOURTH column I wish to have the TOTAL TIME added from the THIRD column and this where the problems starts. I used this formula =SUM(C2:C500) and doesn't work correctly.
Let's say I have the following data: ....
Looking for a formula that will convert military time into hours and total the hours in each row going accross up to 31 days. Only problem is the word 'OFF' is included on various days in each row.
View 9 Replies View RelatedI have written a formula to convert military time to 12-hour format.
View 3 Replies View RelatedI am parsing a cell that contains the date and time; "2013-05-20 13:20:39" and it reads this way in the active cell. In the formula bar it reads; "2013-05-20 1:20:39 PM" and looks that same way when I use text to columns. What do I do to keep the time in military time (i.e. the way it appears in the cell) when I parse the cell contents?
View 5 Replies View RelatedIn A1, I've got a time for an event expressed in military time without colons, like 1130.
In B1, I've got two more times expressed the same way, like 1230-1300. These are the time the event was actually began and ended.
I've separated these two times into four different columns, the first two (C1 and D1) containing the raw numbers 1230 and 1330, and the second two (E1 and F1) containing those numbers formatted as times (12:30 and 13:00) via the TEXT function =TEXT(C1,"00:00")
Getting the difference between these two times (expressed in minutes) is not difficult. What is proving to be difficult (however simple it seems) is checking to see if C1 (time event began) is within an hour of A1 (time event was scheduled.) I was able to get this to work with times not involving 0000 or having, say, 0130 as an event time and 2300 as the time the event was started, but those two cases (switching 0000 to 2400, and moving between "days") is causing a hangup. Checking if A1
B. start time C. end time D. Total time (military time)
Example: 2300 - 0300 = 4 hrs worked.
=IF(C19-B19>0,C19-B19,1+C19-B19)
I have a row for every date the hors is worked.
I cant seem to get the total hours to calculate correctly at the bottom of column D for a total hours worked in a particular pay period. It calculates a total up to 24hrs then reverts to zero. I have tried [h]:mm =SUM(XX:XX) and just about everything else I can think of and cant get it to calculate a correct total over 24 hrs.
if someone called me at 4:55pm and ended the call at 5:10pm, the whole call lasted 15 minutes. So, I want to show on excel that the call lasted 5 minutes in the 16th hour of the day (4:55pm) and 10 minutes in the 17th hour of the day (5:10pm), for a total of 15 minutes.
View 3 Replies View RelatedI am trying to find a way to have excel recognize text data input as date/time.
[Code] .....
Where 02 Is the Date, 2020 is the time (military) Z is Zulu/GMT, MAR is Month and 14 is Year. I believe excel recognizes
[Code] .....
But I have a spreadsheet (on a confidential system) with thousands of entries that I need to convert. Also, the people I have working for me are not remotely. I reject the idea of entering data that way.
I am also trying to keep the display the same format: ddhhmm"Z" MMM yy
I'm getting a time data on the format "0h 00m 00s" but I can't convert it to a standard "00:00:00" format to properly handle it and I'm not so Excel savvy. I already tried looking for something on google but the formulas for similar issues "0h 0s" or "0d 0h 0h" are not working (I can't find a way to adjust them). For example: I'm have the following data on G3:
0h 37m 52s
and I'm using the following TIME/FIND formula:
=TIME(FIND("h",G3),FIND("m",G3),FIND("s",G3))
but the outcome is "2:06:10" instead of "0:37:52"
I have a file, and I want to put in the standart deviation, over 100 points a time. So =C2:C102, next will be C3:C103 etc, but only if there are values in the Easting column. I ID the columns, but something is wrong about by code, it put's like $ for the row and column.
View 3 Replies View RelatedIs it possible to convert the following data to an Excel-recognized time format (easily, as I have numerous million-row files with time data like this). Some actual data is below with what it should be in parentheses.
0 (00:00)
1 (00:01)
13 (00:13)
57 (00:57)
145 (01:45)
308 (03:08)
900 (09:00)
1123 (11:23)
1334 (13:34)
2332 (23:32)
I'm copying data from another source to excel, and for certain date entries they come as text in the following format "On 14 May at 8:00". Is there anyway to convert multiple entries like this into a standard date format? With or without time is fine - just the date will do.
View 4 Replies View RelatedIs there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value? eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm. Other than creating a table and using a vlookup function
View 3 Replies View RelatedI have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View Relatedthe vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies View RelatedI am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies View RelatedConsider this code:
'light eligibility
Dim facb As String
Dim sunset As Variant
[color=green]' check if facility has lights[color]
facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code
If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date
[Code] ......
This code checks the need for lights at a facility.
It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.
If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.
If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.
As I step through this code:
WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights.
Check to see if lights are needed.
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False)
sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup.
If rental_end.value > sunset Then
rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ...
lghtson = sunset - 0.5
0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)
This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
i am looking to do a table which shows time started, time finished and then a total for hours that day, then that week.
Start 08:00
End 16:00
Total 8 hrs.
How can I get the total to display as 8 hrs? not 08:00? When I change the format to "number" it shows 0.33?
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
production01.png
I am trying to figure a way to search for a cell that has a specific date and time range. There are several cell titles pending on the activity. I want to find a cell that has a time ** 7:30-15:30 , 15:31-17:30, 17:31-20:30. The end result is to calculate the activity between those time periods based on the data cells.
Example
If the date searched time field ** the activity ranges is 1635 I need to split the time and credit the activity time in the 730-1530 time and the rest on the 15:31-17:30 time
I have been able to do it on a single labor group based on time alone, but when I try to add the DATE to it my numbers go null. Eventually i will need to add 11 labor groups daily for weeks at a time .
Excel 2007
A client buys 500 minutes of my time. In one week I spend 340 minutes on the account. I'd like a column to show Time purchased (say 500 Minutes) Time spent and a final section showing time left (but showing negative values in red)
I hope I've explained this ok but here is an illustration of what I'm trying to achieve in Excel 2011.
[URL] ...........
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies View Related