I would like to know if it is possible for the output from a match function to be correlated to a location? The output I receive is just a number. I would like to use this number as the row, but I would like to hyperlink it into a formula so that I can create a macro for this process.
In essence I would like for a number in one cell to become a location in another cell.
I am having trouble using the MATCH function in my code. I am looking for a match in one worksheet from a cell in another. I have defined these cells and ranges as variables. However, it doesn't seem to be working with my application. I would like to find the row of the matching cell and use the output of the MATCH function to determine the next step in my code with an IF function. Here is my code. (NOTE: this is my edited code, I removed irrelevant pieces. The major problem is the MATCH function.)
View 4 Replies View RelatedI have a line in my VBA code that i need to change the location of Sheet1 to another workbooks. Instead of Match at Sheet1 at the same workbook I need to match with sheet1 at another workbook called ("Master.xls). The Original Line:
View 3 Replies View RelatedI have a list of data that I'm using the index - match function to output data based on user input.
For example, I have:
1 10
2 15
3 20
So when '1' is selected another cell outputs '10'.
However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.
I have created a List in excel of various tasks. (See attached example.) Each row contains one cell with a function which equals the cell above it and to the right. So the function for cell C3 would be D2. The only importance is that the cell mirrored is always the cell one above and to the right. However, now I would like to be able to rearrange this List, but the “one up and to the right” function will now be all over the place.
Is someone aware of a function which will target a relative location instead of an exact cell?
I am presently doing one of my work in excel manually. I m not expert user VBA. Yes, I do understand codes, but not very good at developing. I am attaching a file which has all the requirements in details. I think this will require hell lot of programming skill, which I dont posses.
View 7 Replies View RelatedI have a spreadsheet with Approx 900 rows of information that has been entered incorrectly.
Spreadsheet has 6 columns.
Contact Name
Contact Number
Company Name
Company Account Number
Order Date
Order Numbers
Every Order should have its own line - However I have approx 900 rows where the order numbers have multiple entries instead of single entries.
All the order numbers end "LO" and there all 8 digits long.
I wanted to know if its possible to use excel to look for all instances of "LO" in the column Order Numbers and delete the original Row and replace it with 3 rows with the same information.
Example:
Attached to this post!
I have 15 historic files each approx 35000 rows and I suspect there are more errors
compare two lists of data in order to identify the possible matches considering date&time and the location stored in different columns as shown in the example file attached. The range of date and time for the comparison is one hour, but it can be changed...
View 4 Replies View RelatedI am using this formula to output data into a cell:
=MID(A1,4,2)
The cell value is 50. I am wanting it to appear as 5.0 instead. Can I do this by adding to the formula above or will I need to utilize another cell to accomplish this?
i am looking to create a small table from the attached worksheet that will show how many users there are for 3 different locations, the user names are in column a and the locations in column c. the thing is, the actual worksheet i am using in work contains almost 1000 lines, and is being updated daily, there can be multiple entries for a person for projects etc.. and someone can even be in the availability and pto area's without being in the main project area. each resource can only be on one location so that will not change.
also, there can be blank cells for resource which should not be counted. i was wondering if there was a formula or a macro that would count the distinct number of names and reference them to the location and give a count of resources by location?
What I would like to do is output the first 4 characters of a cell into another cell. eg Cell A1 has "1234 Sydney". If I just use the manual formula "=left(A1,4)" it would give me the correct output "1234" in say cell B2, but as a formula. As I need to automate this in a macro, how could you code this in VBA to output the String "1234" into cell B2(ie the actual output rather than a formula)?
View 2 Replies View RelatedI am having some trouble with the "mid()" function. I have it saved as a variable which pulls 6 digits from another variable. I was trying to paste from the mid variable into my excel worksheet but it keeps on telling me that there is an object required error.
The goal is to input the "mid()" output in my code into a cell in the spreadsheet.
Here is some sample
is there a formula that would have as it's output the cell address of the
same cell where the formula has been entered.
e.g. In cell A10 I input a formula whose output is the cell reference A10.
I've in cell A1 an entry like this: 123*456*7890
=SUBSTITUTE(A1) in cell 'A2' gives me: 1234567890
=ISTEXT(A2) in cell 'A3' gives me: TRUE
BUT, =A3+1 gives me: 1234567891
Hows that happening? Substitute function gives me the output which is a TEXT, and how is it that when I add 1 to it, I get an answer? Shouldn't I get a #VALUE! error instead?
I want to pass an array to a function, and am unclear how to do it. For example, the following declaration does not work:
Public Function xyz(a() as Variant) as Double
There is an additional requirement that I would like the output also to be a range of the same dimensions, typically one column and 100 rows. Is this possible?
A further twist is that the function I am writing calculates two values for every element in the input array and I need the output of them both.
An inelegant solution would be to write two separate functions, but I was wondering if it is possible to get two array outputs from a single function.
Trying to set this code to position the input box over the target cell so a user has to fill in the box before proceeding. Is this possible?
ElseIf Target.Value = "Plate" Then
Add = InputBox("Please Enter # of sides to be Painted. If Not Required Enter 1", "Paint Sq.Ft.", "1", "c", "Target")
If Add = "2" Then
Target.Offset(, 19).FormulaR1C1 = "=RC[-9]*2"
Else
Target.Offset(, 19).FormulaR1C1 = "=RC[-9]"
End If
I Know input box movement is set as twips but can i just somehow specify the intersection between row c and target as it's position?
I have numbers in cell A1 (say 3545852) as a sum of a data range. I want to display it like this "Rs. 35,45,852.00 Cr."
How can i do this. I used text function like this
="Rs. " & text(A1,"0,00.00") & " Cr."
But it displays "Rs. 3545852.00 Cr."
I want thousand separator also.
I am attempting to multiply the value of strings/integers for an output in a function macro. I know it's a simple question, but a simple answer would be suffice. I'm in the middle of a massive brain fart...
View 6 Replies View RelatedCan a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I have a formula in Cell A1. It tells me the cell location of the last number in column E. So, for example, I input the number 44 in cell e85, the value for cell A1 becomes $E$85.
Let's say I now put the value 33 in cell e86, now the value for A1 becomes $E$86.
I want to calculate the average of the values in column E, all the way from E1 to whatever is in A1.
Here's what I need: =AVERAGE(E1:<whatever is in A1, like $E$85>)
How do I write the AVERAGE formula to make this work?
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedI need code for a search box function, that returns the information recorded in a cell for example, "Barcelona" or "London" etc), instead of the location of the cells.
I will need to narrow it down to search only the information in the following columns:
Sheet2
I2:J10932
I am totally new to VBA coding and have stumbled my way through a few things, but everything I have searched for so far has had at least one error when transposing to Excel.
I am running Excel 2007.
how to convert a match statement to vba with multiple conditions? I have situations from where it has to match two criteria, to matching six criteria.
=IF(AND(ISNUMBER(MATCH(1,($K$2:$K$393=Y2)*($O$2:$O$393=$D$1),0)),
'ISNUMBER(MATCH(1,($K$2:$K$393=Y2)*($O$2:$O$393=$G$1),0))),1,"")
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
I have a data validation on a cluster of Cells that has a name.range = "match". On clicking on a Cell in Row 61 belonging to range = "match" i get a Data Validation|Custom formula(Alt+A+V+V) "=J61>=0"
now how can i convert this function of Data Validation to a Vba script.
To be Exact what i need is....
If a value is entered in cell belonging to range.name = "match"
then check the value in "corresponding row" of the column J.
If Value is greater than J
then stop vba script and show message box.
If value is not greater than J then run desird Code.
I hope the following picture might clear things even more of what im looking for..
Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedTable 1:
I like to go to Berlin.
You like to move to Amsterdam.
They want to see Chicago.
When will the reach San Francisco.
Table 2:
Amsterdam
Chicago
San Francisco
Berlin
What I want to do:
I want my function to see if the text in Table 1 contains a value in Table 2, and if yes, output that value.
Desired Result:
Row A1:
I like to go to Berlin.
Row A2:
Berlin
Row B1:
You like to move to Amsterdam.
Row B2:
Amsterdam
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.