I am trying to write a macro so that when a user click a submit button, the value of a cell is copied and paste into another worksheet. However, the cell that is being copied is a forumla (=3+3 for example). But when it is pasting, I would like it to be just the value "6" and not the formula.
View 2 RepliesI would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
My workbook has sevaral sheets reresenting the payment methods used by our customers. Each sheet has a range of cells F9 to Q33 which should hold the value of payments for each working day. e.g. F9 represents April 1st, F10 represents April 2nd.
A daily list of values is supplied which then transfers that day's value into cell E1 on each sheet.
On each sheet I manually have to take the value in E1 and copy and paste special: value into that day's cell e.g. today I will paste into cell K21. The cell value then looks like this '12134.12'. I then edit the cell to put a calculation on the end to divide the value by the value in another cell on the sheet. The cell value ends up like this '=12134.12/$G$5'. This is so I can see the values in thousands of pounds or by changing the value of G5 to 1,000,000 in millions.
Tomorrow I will do the same but in cell K22.
I have to do this on 15 worksheets and I have been struggling to get a macro together to do this. I can get as far as copying and pasting but I don't know how to add the calculation onto the end. I also would like to be able to input the cell destination daily probably with an input box so I can be flexible and potentially run it sevaral times if I need to catch up on previous days.
Automatically copy formula to next cell when i enter something in perticular cell ....
View 11 Replies View RelatedI am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies View RelatedI want to copy formula from previous row to next cell when i enter something in perticular cell.
i.e
--Colomn A --- Colomn B -- --------Colomn C
1 01-09-07 ----- John ----------=vlookup(b2,$s$1:$t$10,2,false)
2 01-09-07 ----- Smith -------- =vlookup(b3,$s$1:$t$10,2,false)
3
4
5
Now if i enter date in cell A3 then cell C3 should be automatically filled/copy formula as celll C2. and so on......
then if i enter data to A4 then cell C4 should be automatically filled/copy formula from cell C3.
I have also attached example file.
I have a column with many different numbers and varying amount of digits in the cell it says 9.85, or 35.09 but in the formula bar it is not rounded and I need to copy these numbers to a csv and when I copy it the row to the CSV it still has the non-rounded totals in the formula bar, I have tried protecting the sheet and tried to paste special but neither seem to work how would I go about just copying exactly what is in the cell to another?
View 14 Replies View RelatedI am trying to copy only the value from one cell to another and not the formula.
Usually I use:
Cells (1, 1).Copy Destination:=Cells(1, 2)
But this method copies the formula and not the value.
I have been using:
Cells(1, 2).Value = Cells(1, 1).Value
I know I can do something like: (but it seems long and I'd rather not 'select' anything)
Range("A1").Select
Selection.Copy
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
I couldn't find a way to use xlPasteSpecial with the first method.
I have the formula like c1=sum(a1+b2) in CollectData and then when click the button then they copy it to cell c2:c50... But I don't know how to create it by looping. Because sometimes the cell are more than c50 and sometimes it less than c50.
View 9 Replies View RelatedSo I've got an Excel sheet with two cells - A1 and A2. In cell A1, I have a comment that says "Hello". Is there any formula I use to copy the comment from A1 and apply that comment to A2?
View 10 Replies View RelatedA1=www.google.com/testing/123/1234.jpg
A2=www.yahoo.com/
I need a formula to copy testing/123/1234.jpg to www/yahoo.com/
End result: A2 = www.yahoo.com/testing/123/1234.jpg
In reality, any data after www.google.com/ needs to copy to the end of www.yahoo.com/
I need to copy information in one cell to only part of another cell. For example:
C1:Office Name N1:Path
C2:Houston Office N2:OU=Houston Office,DC=contoso,DC=com
Trying to copy from anything in cell C2 to after the = sign before the comma in cell N2.
I have created a spreadsheet that will be viewed/used by various users (read only as I have protected the sheet except from three fields), although I would like to give them the ability to copy the contents of a specific cell that is protected.
I have tried to give them the ability to select the locked cells and then copy, but that means that the formulae in the cell is copied as well.
how I can let people copy a locked cell without the formulae?
How to write a VB macro to copy an existing formula from cell A1 to cell A2 and back again.
I want to have a macro button which will act as a toggle each time the button is clicked.
For example the data will either be in cell A1 or A2.
When the button is clicked once, I would like the macro to execute and determine whether the formula is contained in A1 or A2.
If it finds data in cell A1, I want the Macro to cut and paste it to cell A2.
On the second click of the button I want it to do the opposite. Effectively it's a toggle switch.
When I copy a formula from a cell into many cells in this way
rangeinit = Sheet2.Cells(srs1, scs1 + 2) & "2"
Sheet3.Range(rangeinit).Formula = Sheet2.Cells(srs1, scs1 + 8).Formula
rangetoextend = Sheet2.Cells(srs1, scs1 + 2) & "3" & ":" & Sheet2.Cells(srs1, scs1 + 2) & (lngRowsNumber + rowsheader)
Sheet3.Range(rangeinit).Select
If I have a cell lets say A1 with a formula in it say "=A2" how do I copy A1 into A3 so that A3 will contain the text =A2 (and not the formula)?
i pull the formula of o21 to o22
o21 has formula =IF(J21>=U21,1,"")
022 has formula =IF(J22>=U22,1,"")
and basically u21 and u22 are "=s20"
so may i know what formula i should use to simplify o21 and o22 so that i do not need to use u21 and u22
i cant use =IF(J21>=U$21,1,"") because if i copy this formula and paste to other cell, it will always refer to U$21...
I want to copy =d8*k10 into several cells, but the references keep changing. I've tried several things that I've found on the internet, but nothing seems to work and the I can't seem to copy to a columnof cells.
View 3 Replies View RelatedI think this should be easier than I am making it out to be, but the answer is escaping me....
Among other things, I have a workbook with these worksheets in it: Hours, Cost, Profit, Revenue.
Columns A, B, C & D should be exactly the same on each worksheet. So, I have all the data for these columns entered into Hours, and then reference that worksheet on the other ones.
That works fine until I sort it differently and then instead of having row 2 reference row 2, it will be in row 9, etc.
Now I know I can use =+Hours!$A$2 for the absolute reference, but then i would manually have to change the reference on each cell.
SO - (finally the question) Is there a way to use the absolute reference without having to manually enter it into each cell?
I have a drop down list. When I choose something from the list, it creates a description (text) in the next cell. I need to be able to copy/paste the text from the cell, but it will only let me choose the formula instead.
View 4 Replies View RelatedI have sheet1 having two formulas. Ideally I can copy and paste the formula to the entire column, However this then populates , say 3000 cells unnecessarily which slows down excel performance or increases size of the file.
I am looking for a vba ( this is used to open userform) To include copy formula from filled cell above to next empty row ( cells will be in column K & L)
So every-time userform is opened, the formula is copied to next empty row.
[Code] .....
I am having trouble copying a charts trend formula into a cell.
the best I can do is select it as follows:
ActiveSheet.ChartObjects("Chart 4").Activate
ActiveChart.SeriesCollection(1).Trendlines(1).DataLabel.Select
I know you can work it out using linest, but this chart uses a polynomial to the degree of 3 to 5.
I am trying to vlookup. I want to copy and paste formulas instead of values. Can I use a formula like IF because VLOOKUP only returns the cell value?
Is there a way to return the formula instead of the value using VLOOKUP?
i want to insert value from the name of file from this formula "=MID(CELL(""filename""), FIND(""["",CELL(""filename""))+1,10)" to range b2 until last empty range that i found form this formula =ROW(OFFSET(A1, COUNTA(A:A)-1,0))
Sub lumu()
Dim x As Variant
x = "=ROW(OFFSET(A1,COUNTA(A:A)-1,0))"
Columns("B:B").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B1").Select
ActiveCell.FormulaR1C1 = "kode_wilayah"
Range("B2").Select
ActiveCell.FormulaR1C1 = _
"=MID(CELL(""filename""),FIND(""["",CELL(""filename""))+1,10)"
Range("B2").Select
Selection.AutoFill Destination:=Range("B2", Range("B" & x)), Type:=xlFillDefault 'this an error
Range("B2:B123").Select
On Error Resume Next
ActiveSheet.Name = "t"
End Sub
I have a spreadsheet where I enter text values in a cell, e.g. (.5 x .5) x 2 x .009. I want to find a way to automatically populated the cell to the right with the formula version, e.g. =(.5 * .5) * 2 * x .009 and format as three decimal place number.
One other question, is there a way to enter a template for entry in a cell. It would be nice if the text value above would take care of the parenthesis and multiplication signs for me.
Actually I do want to copy cell N589 from all files excel (sheet1) in c:database2014 to my workbook click run into the row C.
is there any of you can solve it?
I have one sheet with all the formulas for the entire workbook and would like to copy and paste the formulas from Sheet 1 to Sheet 2...Sheet 1 to Sheet 3 etc. without changing the cell referening in the original formula. I am not too sure how .formula works.
Sub CopyAndPaste()
' To copy formulas from Summary sheet to their respective sheets
With Worksheets("Summary")
.Range("R3").Copy Worksheets("2").Range("X3").Formula = Worksheets("Summary").Range("R3")
End With
End Sub
I have spread sheet with food items listed. there are subcategories [i.e. bread items] followed by a list of items. then another category, and so on. i have a vlookup formula in the "non category merged cells' "BAKERY" is merged to create headerlike divisions. is there a way to keep the headers and copy the vlookup formula "through" the headers and leave the headers the way they are? i'm not very optimistic but you guys rule!
Paper123456dfssdfsdf456145sdfsddfsdf56465sdfdssdfsdfBakery34566/2 LB sdfsdf566/2 LB sdfsdf4566/30 OZ dsf
In a worksheet I retrieve data from a SQL query. Now I have to add 5 different calculations per row and each calculation will be stored in a new cell (so 5 columns will be created)
I want to do this with a loop macro and calculate this till the last "filled" row. The number of rows differs every month.
What loop code should I use and can somebody give me an example of the VBA code.
Note that some formulas contains nested If-functions.
I have this fairly simple formula which decides whether to shade a cell or not
=AND($X$1<>"TBD",R3<>"None",AC3="Y")
This is set in cell R3 and I want to copy it all the way down the cells in the R column. However, when I copy & paste (and copy and paste using paste special, formatting) the R3 and AC3 cell references do not update to match their relevant rows. eg If I highlight cell R26 the conditonal formatting formula still refers to cell R3 and AC3, not R26 & AC26. I'm using Excel 2010 but I don't recall this happening in 2003.