How do you define the syntax to copy a cell reference from one worksheet to a different cell reference in another worksheet.
This did not work for me:
Worksheets("Sheet1").Activate
Range("A1").Copy Worksheets("Sheet2").Range("C5")
I have two sheets in my workbook, and I am trying to reference one chart's value into the other. (attached)
I have referenced successfully by manually typing in the reference on row 2 for all values on Sheet 1:
Sheet 1 - C2 needs to reference Sheet 2 - B2. (Sheet2!B2) - no problem all the way across to F2. All those values are correct b/c I manually typed in the reference.
The problem comes when I just want to drag over that same formula to increment for the other cells. It's not incrementing the formula like I need it to.
So, Sheet 1, Row 2 shows how the correct values I need to pull over but was done in a manual way. Sheet 1, Row 5 shows how it increments incorrectly when I try to just drag/copy the formula over. What I need is for Sheet 1 - D5 to reference Sheet 2 - C3, but instead if I try and drag to copy the formula instead of manually typing it in, it increments when I drag reference D2 instead of C3.
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
my excel file have 5 sheets (may be more than 4) ,sheet 1,2,3,4... and the sheet name (all serch data) .
in sheet 1 ,sheet 2, sheet3,sheet4..... incell a3 is the number for reference . in sheet (all sech data ). i create the macro button and the range (n) of this sheet ,when i key the reference number to the sheet1-sheet4 .
if ,it is the same number to the sheet 1-sheet 4. it will copy the data of that sheets paste to the sheet (all sech data ). if it found the same reference number.
i attach with the file to see ,how can i do for macro copy code?
Currently I have a worksheet which is organized to have two pages on it. I will try to explain, i.e. imagine one page of the worksheet in the hypothetical range of A1:D26, then another page in the range E27:K50. So it is staggered on the same sheet. Is there an easy way to copy the range of E27:K50 onto another worksheet.
Aside from the regular copy and paste, I am having problems because there are formulas in the 2nd range (E27:K50) which loose their references once copied.
i.e the formula SUM(A1:A10) I would like to be SUM('Master List'!A1:A10) on the new sheet. Is there an easier way then going through all the formulas and adding the master list part.
I am copying the entire contents of a worksheet onto a blank worksheet multiple times. The problem occurs with the charts which need updating once copied to reference the new worksheet name. I have tried stepping through each chart and then each SeriesCollection but it seems to fall over part way through.
View 2 Replies View Relatedi have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
Sheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.
View 3 Replies View RelatedIf I have a cell that has as its contents as sheet name, is there anyway I can use the cell's address to reference that sheet?
As an example, say I have in Sheet1, cell A1, the text Sheet2. And let's say I want to return the value of cell B2 on whichever sheet the text of A1 says. So, on Sheet1, I might have this:
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
In Sheet2 I have a list of cell addresses showing values such as D5, D32, D59, D221, D869 stored in cells AB7:AB16. In Sheet1 the "D" column holds dates. I want to return the corresponding date for each D# cell into Sheet2 in column AC7:AC16. I'm unaware of the proper syntax for this. I though it would look something like:
='Sheet1'!('Sheet2'!(AB7))
however that doesn't work.
How can this be done?
E.g. say I want to create a list of cells each referencing to the first, second, third sheet, and so on.
Say, on one sheet cell A1 references to the second sheet's A1, cell A2 references to the third sheet's A1, and so on.
Ideally I'd love to be able to write something like
=Worksheet(1)!A1
=Worksheet(2)!A1
=Worksheet(3)!A1
and so on.
Is it possible to have a sheetname reference in a cell?
A1 = "Exhibit A"
and have a formula as such?
=IF($A4"",(IF(ISNUMBER(MATCH($D$2,' Exhibit A'!38:38,0)),"x","")),"")
where the sheetname in bold is pulled in by a reference to cell A1?
I have an IF statment that looks at a sheet but I would like it to look at certain sheets I.E. sheet 2,4,5,6.
Sub SelectPrintArea2()
For Each ws In Worksheets
If Range("Sheet4Q5").Value > 0 Then
Range("A1:AA47").Select
ws.PageSetup.PrintArea = "$A$1:$AA$47"
ElseIf Range("C5").Value > 0 Then
Range("A1:M47").Select
ws.PageSetup.PrintArea = "$A$1:$M$47"
End If
Next ws
End Sub
But it will only look at the sheet it is in and not any of the other sheets. I've tried to tell it which sheets but I just get errors.
How do I copy an absolute cell reference from say a1 to a2 -100 so that the row reference increments with each row. Without the absolute cell reference '$' it works Ok. But with it every cell is the same as a1?
View 9 Replies View Relatedcan i take reference from another sheet to formatt the cell? When i tried to format cell taking reference from another sheet, it says that you can not do that. Is it possible or not?
I'd like to be able to refer to a cell or local scope defined name within my sheet that references another sheet, or accomplish the same functionality in some way.
For example, if I have a sheet MyInformation and then another sheet MyPrintedInformation, where the printed information sheet shows MyInformation in a more printer-friendly format, I might have this in MyPrintedInformation:
a cell or defined name that says (this doesn't work, but just as an example):
let's call the named variable TheSheetToPrint
='MyInformation'. Then from within MyPrintedInformation all of my references look like this
Some cell :
=TheSheetToPrint!A2
I have a problem how to do the next:
A1 cell contains title of some test
The next cells on bottom line (B2:B10) contains the results of the this test.
On another Sheet i want to analyze those results, thus I need the results from Sheet1 be copeid to sheet2. I want just to indicate the test name (A1 location) and the rest of the cells will be copeid automatically(relative reference, relatively to A1).
I have a formula that pulls data from another sheet using standard reference of sheetname! I want to build this forumla to use several sheets, and would like to pull the sheet names from other cells.
For example... instead of LEMONS!a1 and LIMES!B2
I would like to use REF1!a1 and REF2!B2
where REF1 and REF2 are pulled from cell Z1 which contains test 'Lemons' and cell Z2 which contains text 'Limes'
How can I do this?
We have a sizeable Excel workbook that contains many worksheets for various things, everything works smoothly except for one minor niggle.
I am looking for a formula that references to a cell on a previous worksheet, the worksheet could be named anything (eg A1, B, 2, 3.4, etc). Then to add 1, ideally the first worksheet inserted must equal, say, 0 BUT can reference the sheet previous as this is a constant; so something along the lines of...
Cell A1 =magic formula
Cell A2 =A1+1
This is to get a vlookup to work consistently.
OR another option is, for the worksheet to reference an already populated worksheet and read down a table by adding one to reference the cells. Eg first sheet reads ='schedule'!A13, the next sheet added would read A14 then A15 etc...
OR a worksheet (like page numbers) count into a cell onto each worksheet inserted, eg on worksheet 6 in cell A1 the number 6 would be inserted then worksheet 7 would have 7 inserted into A1 etc..
Is it possible for the VBA code to capture the open workbook name and sheet name from a cell?
I've been trying to tweak this ...
I have several worksheets and I want to summarize all of their data on the main page. The second worksheet is called Grady, the third worksheet is called Stella and the forth worksheet is called Westminster.
On the Main Page cell B1 is, "Grady", C1 is, "Stella" and D1 is, "Westminster". On B5 I need the value of cell C5 on Grady but I don't want to have to type it in as this formula will have to be carried over for several columns.
Currently I have:
Code:
=Grady!C5
In cell B5 on the main page but I want:
Code:
=B1!C5
But this only gives me #REF!
Can this be done without using VBA?
Im currently located in Sheet1. I want to reference a cell in Sheet2.Range("B2") using a R1C1 reference.
View 9 Replies View RelatedAfter having searched for a while I can't seem to find any formula that will look at a cell for reference as to which sheet to go to and return a certain cell's contents.
For example,
in column A, I have the text "Sheet1" and in column B, I need the formula to return the contents of cell B15 from Sheet1, based upon column A.
I have Excel 2007, here's what i want to do. I've got a workbook created with several worksheets in it. I want to input the name of a project in say, cell A1 on sheet1. Then on sheet2 cell C4, I want the text I input into the afore mentioned cell to show. I know how do do this with numbers (using the autosum button), but I can't figure out how to do it with text, though it's probably very simple & I'll be embarassed when I get an answer. Following is EXACTLY what I'm trying to do if the above example is confusing.
I have a Project Cost sheet and on it I input (text) a description of a building to be constructed. The cells next to it will be the associated costs of that particular building. There will be several buildings listed on the sheet. On a Sales Figures Sheet in the same workbook, I want to list those same buildings and then their corresponding sales prices. I want these descriptions to be automatically pulled from the costs sheet, so that I only have to input the sales figures.
Im trying to copy a formula to a cell via VBA.
Range("A3").Select
ActiveCell.FormulaR1C1 = "=Sheet1!A3"
Ive tried all sorts of ', ", &, combinations, I cannot find it.
I've been tasked with redoing a revenue report at work, and in my head I've conjured up what could potentially be a huge time saving way of doing things in the future, although have searched help files and looked around online and can't find the formula/macro (if it exists) to enable me to do this.
The problem is this:
Sheet 1 of the workbook is a large input sheet. Every row contained in that sheet will, in column A, be titled 'red', 'yellow' or 'green'. Columns B onwards contain other data which (at the moment) is irrelevant to the problem.
Now what I want excel to do after I've put the raw data into the input sheet (sheet 1), is to read the text in column A for each row, then automatically copy ALL data in that row over to the next empty row on another worksheet.
ie Sheet 2 will have all rows that have 'Red' in column A on the input sheet, Sheet 3 will have all those titled 'Yellow' and Sheet 4 will have all those titled 'Red'.
I know I can use a filter on the input sheet to just show the data I want, but each colour coded row will contain different data to another, and if there is a formula/macro setup i can use to do the above, then I can set the subsequent worksheets up to hide the superflous columns from the input sheet.
I am trying to create a formula that references information on two different sheets, but i want it to show me the values that are newly created when a new row is inserted. The two current sheets are Master and Data.
I have a formula on Master that reads ='Data'!$K$3 to reference the value on Sheet data in cell K3. When a new row is inserted showing me the current readings, I want the Master sheet to show me the NEW value in cell K3 on the data sheet. The problem is, the insert of a row moves the formula on the Master sheet to now be ='Data'!$K$4. How can i STOP the insertion of a row from changing the formula so i continue to see the value i need?
I have this formula in excel 2007:
=COUNTIFS(Blad1!W:W;"1";Blad1!X:X;"H")+COUNTIFS(Blad1!W:W;"6";Blad1!X:X;"H").
Blad is Dutch for sheet, by the way.
In this formula, I want to let the ranges in Sheet1 be dependent of values in Sheet2. The formula itself is in Sheet2.
W must be replaced by the value of Sheet2!B12 and X to be replaced by the value of Sheet2!B9.
I tried this by using the INDIRECT formula, but the quotation marks of the search values are giving errors.
In workbook 1, I have summary sheet with columns
A -> SNO
B -> Customer Name
C -> Product Name
D -> MODEL
E -> Quotation Rate
I have to retrieve MODEL & Quotation Rate .
and also having seperate sheet for each customers say X1 , Y1 , Z1 ( so other sheet names as X1, Y1 & Z1)
In X1 sheet , I do have following columns
A-> Product Name ,
b-> Model (as of now limited to 1 per product name)
c -> Rate
Now my request is as follows Based on the Column b value in Summary sheet - i have to goto respective sheet and do vlookup for the respective product name and retrieve model and fill it in Column D. I heard i can use INDIRECT function and Vlookup in this junction .