i'm trying to do (for the past couple of days manually) is copy the names from the 2nd sheet to the 1st sheet but need to make sure that the proper location ID match that of the 1st sheet. If two names is assigned to the same location, a new line will be added to the 1st sheet but never allow if the location ID do not exist.
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
Their is sheet in which some online data is comeing.
#1 I have to copy that data in another worksheet and its name shud be last 3 characters of the sheet in which data is comeing. Say for example data sheet is abcd_2781 so new sheet name shud be 781
#2 now i have to copy the data based on certain validation the sheet has 14 colums
the data keep coming in....every time it comes with a unque ID. but when it comes there is a colum which tell us three operations 0=NEW 1=change 2=DELETE
And so when ever we copy data it shud only copy 0,1,2 it shud not copy new, change or delete.
Now there is one more colum in which their is entry ID, it carried diff ID for NEW transactions. But when ever their is change or delete it will be same what ever was generated when it was new. so the validation shud be
when its 1= change it should match its Entry ID and delete the complete ROW with all previous same ID keep this only
When its 2= Delete it should match its Entry ID and Delet the complete row with all same including itself.
i am attaching the input and out put data Input data Output data MDUpdateAction MDEntryID MDUpdateAction MDEntryID 0=NEW 100302 0 100302 0=NEW 100303 0 100305 0=NEW 100304 0 100306 0=NEW 100305 0 100314 0=NEW 100306 0 100313 0=NEW 100314 0 100315 0=NEW 100313 0 100316 0=NEW 100315 0 100293 0=NEW 100316 1 100291 0=NEW 100291 0=NEW 100292 0=NEW 100293 2=DELETE 100303 2=DELETE 100292 2=DELETE 100304 1=CHANGE 100291
I need to get data copied from sheet1 to sheet2 depending on selection in a validation list.
The data is on the same row and all the same range. So it would look something like this. A B C Fruit Orange Apple Pear Veg Potato Carrot Onion Animal Bear Cow Dog
I have the data in A in a dynamic range and validation list. I need all the data copied from the specific rows ie choose Animal from the validation list in Sheet2!A1 and the entire row Bear Cow Dog get copied to Sheet2!B1, Sheet2!C1, Sheet2!D1.
The second problem I think is a lot more complex. So the same scenario above but this time its a multi select on Sheet3. I need to be able to select two (or more depending on Fruit and Animals to display in A1, A2 and then their valid options to appear in B, C and D
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
The last few days I have been trying to figure this out with no luck whatsoever. I am using Excel 2010 32-bit with power query on a Windows 7 64-bit computer. I was going the use the html creator, but the dl link was down and I had to use screenshots.
I have a sheet titled "LeadSheet" that contains multiple data blocks of information (around 20). I have attached 2 examples of these data blocks and 2 examples of results needed below. I tried to create them so they would fill in the gaps of my explanation.
All of these data blocks are 7 columns wide and vary in row size from 10-250. The blocks of data all have titles on the 5th row, but are not headers, and then data beginning directly underneath. I hesitate calling them ranges because I only selected one data block as a range and named it "lead1" and then stopped not knowing if I was headed the right direction.
I first tried to create a table out of the range, but was unable to do so because the "Name" column is an array. The phone and address columns are populated by VLOOKUP. And although the images show the column names as the same for name, phone and address theyare actually different, like name-firm1, name-firm17,address-firmxyz, etc, etc. I not putting that in the images. The "Option 1", "Option 2", "Option 3" and "Option 4" columns are generated using a =IF formula.
I have another sheet titled "ResultsSheet".I'm needing a way or code to copy entire rows from the multiple data blocks/ranges in the "LeadSheet", and paste it in the"ResultsSheet", based on any value occurring in any of the"Option" columns within the individual data blocks/ranges along with appending the "Option #" title to either end of the copied row.
The "LeadSheet" is constantly being updated so information is being added and taken off all the time. That being said, is there anyway to make it update as soon as the "LeadSheet" does or on a timed interval so that the"ResultsSheet" is always up to date. And also prevent it from continuing to re-copy over duplicates of information that has not changed?
Ifthe "Option #" result is the exact same percentage then the order does not matter between them.
Ifwithin the same data block/range both "Option" columns have data it is usually because of some error and is most likely bad datathat does not need to be copied. i.e. "Steven Seagal". If that makes this task much more difficult I can live with it.
If within two or more different data blocks/ranges the same name and info appears that if fine because the "Option #" will always be different. i.e. "Chuck Norris".
I am also trying to make the "ResultSheet" ordered from largest percentage to lowest, but I assume that should be done once the data is on the "ResultsSheet". No headers or titles are necessary on the "ResultsSheet"
I am looking to copy the columns containing firstly H and then A from this sheet (sheet 1) to sheet 2. At the moment the H and A run in sequence, sometimes 2 or 3 times in a row but I want them to appear seperatly in sheet 2 so that I have all of the H's together in a sequence and all of the A's together in a sequence further down the sheet. I haven't used macros since school and don't have the first idea where to start. Do I need macros or is there a simple formula I can input? The data I am looking to copy is below with the letters in question 3 rows down.
I am not familiar with using VBA and believe this could solve my problem, I would be glad of any assistance.
I am trying to copy text from sheet 1 of my workbook onto sheet two of my workbook, whilst consolidating into a nice neat list omitting any blank cells.
The text appears on multiple tables each table has 10 rows throughout worksheet 1
A1 = Good A2 = Bad " " A10 = Fantastic
A15 = Good A2 = Bad A10 = Fantastic
I hope this makes sense, I do have a formula that will do this =IF(ROW()-ROW($E$500:$E$509)+1>ROWS($K$35:$K$44)-COUNTBLANK($K$35:$K$44),"",INDIRECT(ADDRESS(SMALL((IF($K$35:$K$44<>"",ROW($K$35:$K$44),ROW()+ROWS($K $35:$K$44))),ROW()-ROW($E$500:$E$509)+1),COLUMN($K$35:$K$44),4))) however I have multiple tables and the formula greatly reduces the speed at which the sheet is working.
clicking the platform button on sheet 2 runs a module that plots trains waiting in platforms 1-15 the value are got from sheet 1 columns
a = arrive b = depart c = platform
ideally i now need these shaded cells to show the departure code of the train they represent and i need every cell of the train to show the code (eg all 60 cells if the train stays for 1 hour). this is because some trains arrive as 1 but detach and depart as 2 or more trains. this would show where 1 train leaves but another part remains to leave later under another headcode, the codes i need placing over the shaded cells are the code in column I sheet 1 (ideally written in the invert colour of the shaded cell so they can be read easily) as an example of what i'm after i've manually added the code for 1 train in black on sheet 2 for the 1st train in the list http://us.f13.yahoofs.com/bc/466da4e...i.abGBkbJbSCH_
I have been trying to crack this all afternoon to no avail - I've read every thread on it and not been able to customise the macros to work! In fact - i've never written a macro before!
If cells in Colomn E on Sheet '2014 Events' contain the text "Park" - Copy the Row to Sheet 'Park Events'.
I have the code below, which is auto-numbering in column B on sheet 2 (IR Register) and indexing down one row each time, ready for the next unique entry.
In the attached wb I have 4 sheets. The macro selects a row then copies it to specified location. This works great. What I would now like it to do is match data in (MonthStats) column b then copy those rows to specified location. eg All rows containing AAA would be selected then copied to sheet AAA. I have searched various threads but without success
I have a commissions workbook with about 20-30 sheets. In A1 of every sheet is a Name and in column G is a bunch of Numerical Values. I want to create a "Grand Total" sheet where I have the Name and the Values corresponding from each of the sheets onto my final one.
I would like to create a spreadsheet that when a selected number of cells are set to "yes" then a lookup to a small table should then copy 3 columns of text at the side of that table, if the criteria is met with a "1". If either f2, f3 or F4 = "Yes" then look up A9:c16 and if there is a "1" in respective column then copy all text to the right in columns D, E & F to "result" work sheet. I am trying to create auto copy of selected data without the use of a filter, by pressing a cell / button.
I have approx. 35 workbooks similar to the attached in a single directory. Each workbook has 3 tabs named Help, Example and Template. I need to copy the 36 Template tabs into one new workbook. I would also like to rename each tab in the new workbook based on the text in cell A1 of the originating Template tab. M
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
This Macro works fine to copy data from multiple sheets into one master sheet, but it is also copying the formula. How can I change this Macro so that it is copying and pasting VALUE only?
Sub Combine() Dim J As Integer On Error Resume Next ' work through sheets For J = 4 To Sheets.Count ' from sheet 3 to last sheet Sheets(J).Activate ' make the sheet active Range("A10").Select Selection.CurrentRegion.Select ' select all cells in this sheets ' select all lines except title Selection.Offset(1, 0).Resize(Selection.Rows.Count - 1).Select ' copy cells selected in the new sheet on last line Selection.Copy Destination:=Sheets("Combined").Range("A65536").End(xlUp)(2) Next End Sub
I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well. - once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table. - once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table. - once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table. - and so on, the same with other 3 remains sheet.
I need to have cells from sheets to automatically transfer to a separate total sheet...
So in other words for every tab/sheet I have...I need cell B10, once populated, to automatically transfer to a designated cell on a separate Total tab/sheet...
I tried =Sheet2!B10...but when I copy it into the next cell it reads...=Sheet2!c10...what I need is for the sheet to change...but the cell to stay the same...
I am trying to copy multiple rows (ie: rows that have data in them) over to another sheet on the next available line.
I have the code to go through and filter the data that I want to use. Now I have anywhere from 1-50 rows of data all sequentially together that I need to either copy or move to another sheet ("Data") on the next available line.
I have this code so far:
Worksheets("To Be Worked").Range("B5:K5").Value = Worksheets("Data").Range("A1").End(xlDown).Offset(1, 0)
But this only includes 1 row so I either have to loop the VBA or expand the range to include multiple rows. Both of which I don't know how to do. And that code doesn't work too well either.
I need to copy multiple rows in a spread sheet with a forloop. The problem is I only need a select few columns. A:C and F:H. When pasted into a new sheet I need to columns to come in A:F
I have a loop that does this already but it is huge and is slowing down my file. Here is part of it.
I have a typical scenario. I have a sheet in WB1 as Sheet 1 and I need to copy this sheet into multiple workbooks in a folder on the desktop and save the files too.
Is there a macro that would resolve this?
I have a constraint here, the macro should not be activated in any of the workbooks as I would using a tool which has VB as the backend and there would be a conflict when executing.
I am looking to write a macro that will take 5 sheets and paste the rows into 1 summary tab. The names of the sheets are, CMH, ORD, JFK, LAX, and MIA. There are other sheets in the book but I don’t want any information from them. The five sheets have the same columns. I want to paste only the rows of the last entry for Origin and Forwarder. I have enclosed an example. So in rows 2 & 3 we have the same Origin-Forwarder combo but I only want the most current which would be row 3. Some Origin-Forwarder just has one entry so of course I would want that one.
I have two separate data files that I am trying to combine into one worksheet. One set of data looks something like this:
Column A Column B ColumnC Date1 Name1 Date1 Name2 Date1 Name3 Date2 Name1 Date2 Name2 Date2 Name3
This is repeated for something like 200 dates, and there could be anything from 1 to 10 lines for each date, for a total of over 1000 rows.
The other data file has this information:
Column A Column B ColumnC Date1 Place1 Date2 Place2 Date3 Place3
I.e. one line for each date.
I want to combine the data so that Column C contains the Place data. All I could think to do was combine them and then sort by Column A, so I ended up with this:
Ultimately I want to sort the combined data by Column C, I just have to get the data in there first.
Is there a formula or macro or something I could use to copy the Place names automatically? Each worksheet with 1000 lines and several dozen worksheets means I'd have to copy and paste dozens of thousands of times, which is a bit tedious.
I have a workbook that writes what I need to do. When done I need to type in another sheet the exact same text and the date I did it.
I wonder if its possible to add a checkbox and when this checkbox is pressed it will automatically copy/paste the text to the next free cell of the other sheet, so I only need to type date.
Here is the workbook: [URL] .....
Check box would be added in cell A17, A18, etc.
And the text would be copied to sheet Preventive Maintenance Records in the next available cell in column A.
Essentially, I have 2 Sheets: "SheetWSS" = data to be copied "SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS" ----------A------------------------B-------------------------C 1------Trade ID -------Description---------System no. 2--------579----------------Loan ---------------------- 7 3--------580----------------Deposit---------------------22 4--------702----------------Deposit--------------------- 11 5--------703----------------Loan ----------------------- 58 6--------732 ---------------Loan------------------------66 7--------733----------------Deposit-------------------- 99 etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do: 1) Go into Column C, find system no.7 and 11. 2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied. 3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
Monthly, I get a CVV of data with associated statistics. I'm generally only interested in rows with the first cell (A) containing specific words.
The cells (column A) are those such as below:
make a webpage free create web page free make a website with yellow pages how to create web page
So, if I wanted to take copy the rows where the cell contains the text 'create web page'. I want it to take 'create web page free' and 'how to create web page' and the cells in their respective row.
I would like these rows to be copied into a new sheet.
i am looking for a macro that would import chosen multiple text files and append them all into one worksheet into column B (one textfile row into one cell), with column A displaying the imported filename next to every entry.
I have excel from windows 8 and I am trying to copy the information on one cell on a sheet to multiple sheets. I tried the click on one tab hold shift and click on the last tab and type the information or press F2 or paste the information. Well, nothing works.
