Copy Entire Row By Range & Suppress 'Cannot Edit Links' Message
I have 10 workbooks which have various calculations and have several links to each other. We use Excel 2003.
For each of these files, I have the following code in the Auto_Open module
Range Range(“TodayComp”) is a date taken form a link in another spreadsheet. It is on Column 3, but the row changes every day as more rows are inserted before it
This sub looks at Range(“TodayComp”) and checks the date on the cell directly above.
If say Range(“TodayComp”) is 6/25/2008, and the cell above is 6/22/2008, it will insert three rows right above Range(“TodayComp”). These rows need to be copied with formulas from the current row above Range(“TodayComp”)
Issue One:
The following code works (it copies the rows), but it takes forever to run, as you can see in bold, I copy and paste each cell, instead of the entire row.
Is there a way to copy and paste the entire row? Remember that I have only a named range to refer to, no cell address as it changes every time.
Public Sub Auto_open()
Update_Dates()
End Sub
Public Sub Update_Dates()
Dim tdy, prev As Date
Dim index, i, j, yr, no_inserts As Integer
Sheets("Comparison Computation").Activate
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Run-time Error '1004' :: Method 'Range' Of Object'_Global' Failed
I am trying to create a macro in my personal macro book such that whenever any workbook is opened the calculation settings (tools, options, calculation tab) are set to semiautomatic and do not calculate before save. The macro works when I am opening Excel itself (Book1) but when I open an already saved file it gives me Run-time error '1004' Method 'Range' of object'_Global' failed From there I choose Debug, the VBE window comes up, and I hit F5 to continue the code without doing any actual debugging. Here is the code that I am using. This is in the Personal Macro book on the "This Workbook" section....
View Replies!
View Related
Run-time Error '1004' Method 'Range' Of Object '_Worksheet' Failed
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed. The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
View Replies!
View Related
Run-time Error '1004': Methd 'Range' Of Object '_Global' Failed
I have constructed the following code to set the print area of worksheets that have been selected to print to the range referenced in a worksheet level named range "xPrintArea". This named range is set using the OFFSET function. The procedure also sets the left footer to be a copyright notice that is also contained in a cell referenced by a named range. Set oPrintArea = Range(sPrintAreaName) is generating the error "Methd 'Range' of object '_Global' failed". Note that the line Set oCopyrightNotice = Range("CopyrightNotice") does not generate this error. From what I've been able to determine from other research on this forum and others, I believe the problem is that I need to more fully qualify the object which Range(sPrintAreaName) is referencing. I've already tried to use Set oPrintArea = wkSht.Range(sPrintAreaName).................
View Replies!
View Related
Suppress Update Links Message
I have a template workbook which contains link to information in another workbook. I open this external workbook by GetObject method. Private Sub Workbook_Open() Dim MyObject As Workbook Set MyObject = GetObject("C:data.xls") End Sub And I would like to get rid of this window (I don't want to update that information until the external file is open)
View Replies!
View Related
Run Time Error 1004 - Method 'Range' Of 'Object'_Global' Failed
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far... When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])" is highlighted in the debugger. Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
View Replies!
View Related
"Run-time Error '1004', Method ' Range' Of Object '_Global' Failed"
I keep getting this "Run-time error '1004', Method ' Range' of object '_Global' failed" Here is the code that has the problem: Option Explicit Dim i As Long Dim j As Long Dim lDup As Long Dim lRow As Long Dim NoDupes As Collection Dim rRng As Range Dim Rng1 As Range Dim Rng2 As Range Dim Rng3 As Range Dim Swap1 As Variant Dim Swap2 As Variant Dim wks As Worksheet Private Sub UserForm_Initialize() Call DefaultSet For lDup = 1 To 3 Call NonDuplicatesList(lDup) Next lDup End Sub..................... It does not even loop once though the original UserForm_Initialize For/Next loop.
View Replies!
View Related
Mail Merge Error (Method 'Range' Of Object '_Global' Failed)
i'm tring to reuse this code which creates a label on excel. The data used to create the labels is on the "Data" sheet and the labels are generated on the "Label" sheet. The problem is the first time i run it it generates the labels, then whenever i try again it gives me the following error; Method 'Range' of object '_Global' failed. Each row on the "Data" sheet repreents a label.
View Replies!
View Related
Error 1004 Method 'Range' Of Object '_Worksheet' Failed
I have a cet of CommandButtons on sheet 1. The code for these buttons is in the code section of the sheet. A named range is referenced in this code. This named range is on sheet 2. Every time I try to reference this or any named range (from any other sheet), I get this "Run-time error '1004': Method 'Range' of object '_Worksheet' failed" The last time I had this error I was able to fix it by moving the code to Module1. I tried that here, but it did not work (I can't figure out how to call it from the sheet). CommandButton. Here is the code from the sheet for one of the buttons: Private Sub TBEnterUp_Click() iLast = Range("WBDate_DayLast").Value '<<<<<<< iItem = TBEnter.Value If iItem = iLast Then TBEnterUp.Visible = False Exit Sub End If TBEnter.Value = iItem + 1 If iItem > 0 Then TBEnterDown.Visible = True End Sub It is a simple number advancer. It is working in the UserForm I took it from. I have included a sample file of the problem. Feel free to look at it and borrow anything in it that you might like.
View Replies!
View Related
Method 'Add' Of Object 'CommandBarControls' Failed (run-time Error '-2147467259')
i get this error on the line in bold Method Add' of object 'CommandBarControls' failed (run-time error '-2147467259'). im not sure why its giving that problem, but im not very fluent in custom toolbars. '//The following two procedures add a custom menu to the workbook programmatically//' '//and then delete it//' Public currentMonth As String Sub CreateMenu() Dim mybar As CommandBar Dim myControl As CommandBarControl Set mybar = Application.CommandBars.Add( Name:="CustomButtons", _ Position:=msoBarBottom, Temporary:=True) mybar.Visible = True Set myControl = mybar.Controls _ .Add(Type:=msoControlButton, ID:=1) With myControl...........................
View Replies!
View Related
Method 'Range' Of Object '_Worksheet' Failed Error
I start in my "Action Plan for For Single Market" worksheet and if I click on the Command Button I then want to read in a couple of variables, and jump to a second worksheet (called "Market Action Plans") where I then want to copy a range, and then paste it in another area in that same sheet. I thought I had worked out what to do, but when I execute I get a "run-time error 1004" when the macro gets to the "Range("Updated_Results").Copy" line. Excel describes the error as "Method 'Range' of object '_Worksheet' failed'" - which might as well be a foreign language as far as I am concerned! Private Sub CommandButton2_Click() Current_Market_Row = Range("Current_Market_Row") First_Col_Action_Desc = Range("First_Col_Action_Desc") Sheets("Market Action Plans").Select Range("Updated_Results").Copy Cells(Current_Market_Row, First_Col_Action_Desc).Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Sheets("Action Plan for Single Market").Select End Sub I am an occasional macro-creator and every now and again, I come across this type of problem where I can't get variables to be reconized, etc. I think it's because I don't understand enough about Private versus Public, and how to declare variables.
View Replies!
View Related
Method 'copy' Of Object '_worksheet' Failed
From the current open book, I'm opening a 2nd book, then copying all worksheets from the 2nd book that meet criteria, into 1st book, (in the same order), but am getting Method 'Copy' of object '_Worksheet' failed error. What am I doing wrong? How to OVERWRITE worksheets?We'll be running the same process with new data, so also need to overwrite worksheets in 1st book. Sub Build_Branch_File() Dim FileName As String Dim Wkb As Workbook Dim Ws As Worksheet Dim WNum As String Dim Tnum As String Dim RegionNo As Integer Dim Original_Wb As Workbook With Application . ScreenUpdating = False .EnableEvents = False .DisplayAlerts = False End With Set Original_Wb = ThisWorkbook .........................
View Replies!
View Related
Method 'range' Of Object 'worksheet' Fails
I'm trying to accomplish the following: on "LogSheet" sheet, click on the DailyCloseButton and have various lists on the "lists" sheet automatically sorted before I save and end. The code below gives an error: "Method ' Range' of object '_Worksheet' failed". I have no idea why it failed. Private Sub DailyCloseButton_Click() ' DailyClose and sort routine 'Sort lists Sheets("Lists").Activate Range("Products").Select Range("Products").Sort Key1:=Range("Products").Cells(2, 1), _ Order1:=xlAscending, Header:=xlYes, OrderCustom:=1, MatchCase:=False, _ Orientation:=xlTopToBottom, DataOption1:=xlSortNormal.............
View Replies!
View Related
Method 'Range' Of Object 'Global' Failed
I have a button on my spreadsheet which activates some code, it has worked perfectly for over a year but now for some reason I cannot get it to work. When I click on the button now I get the message: Run-time error '1004' Method ' Range' of object '_Global' failed. the file is far too large to attach here but here is the relevant ...
View Replies!
View Related
Office 2007 - Where Has The 'do You Want To Update Links' Box Gone
I'm opening an Excel file that automatically attempts to update links when I open it, but I am not prompted with the choice to cancel, or update links, when I open the file, like I was in Office 2003. I have checked the Excel Options, Advanced, General, 'Ask to update automatic links' box, but I still don't get the dialog box when I open the file. The file is just riddled with VALUE errors. A colleague of mine who opens the file in Office 2003 can see all the data fine.
View Replies!
View Related
If Statement: Return 'V,' If Cell='&'
When I tried using if & or statements I got an error - so I tried this: =IF(K7="&","V,",""),IF(K7="1 Space + &"," V,","") I want to return 'V,' if cell='&' or if cell='(space)&' I want to return '(space)V,' What is wrong with this statement..?
View Replies!
View Related
Using 'IF' With Conditional Format (change Cell Color Based On The 'P' Or 'F')
My cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters. Samples of what I've tried: =IF(LEFT(L23,1)=P) =IF(MID(L23,1,1)=P) etc. I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
View Replies!
View Related
How To Restrict The Cell Data To Letters 'a' Through 'e' AND 'A' Through 'E'
I am trying to come up with an excel shee which can track the progress of a student on practice exams. This exam only has multiple choice questions, with answer choices A,B,C,D or E. What I am looking for 1) I want to restrict the cell data to A,B,C,D or E (both cases). Note that I am not looking for a drop down/combo box. It would take the user to use one or two mouse clicks to drop down the list, and I am not in favor of that. 2) I would like this validation/formula to be applied to all the cells in a particular column. 3) Nice-to-have. If the user enters a lower case letter, then I would like to convert to upper case.
View Replies!
View Related
Method 'value' Of Object 'range' Failed
I have a while loop in which I'm updated information in 2 separate worksheets. I'm using the With-block statements separately to update each, but after the 30th iteration (and it's always on the 30th), the VBA code halts and get the "method 'value' of object 'range' failed" error message pointing to a line with the code as follows: With Sheet1 .Cells(lngRow, 9).Value = intMonths End With where "intMonths" is an integer variable which I'm populated properly, and "lngRow" a long variable. When I debug both variables have proper data in them, and I have no idea why this is bombing.
View Replies!
View Related
Run-time Error '1004' Method 'Add' Of Object ' Sheets' Failed Adding Multiple Sheets
I have been running a simulation for about 18 hours now and just received: Run-time error '1004': Method 'Add' of object ' Sheets' failed I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using: ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count) The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
View Replies!
View Related
Avoid 'function Is Not Available On A Protected Worksheet' Message
I am using the before double click event on a protected sheet. When the event fires the first thing the procedure does is unprotect the sheet, does stuff and then it applies protection again at the very end. Regardless I still get the 'Function is not available on a protected worksheet' message. How can I stop the message? Any ideas? If no standard approach is available does anyone know how I can hook this using API?
View Replies!
View Related
Worksheet Copy: Method 'Copy' Of Object 'Worksheet' Failed
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc. When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004': Method 'Copy' of object '_Worksheet' failed" Here is the code that I have. The second line is the line that is failing. Worksheets("RoedForm").Select Worksheets("RoedForm").Copy After:=Worksheets(iCount) This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
View Replies!
View Related
Change Name Of 'File In Use By' Message
My co-workers and I have excel files on a drive. When one of us is in the file, and it opens read only we just see the name of our company. How can we change it to be able to see each other's names? Its the "file in use" message that pops up. It states the name of the file and by: X when we open the file.
View Replies!
View Related
Copy 'x' Cell Value Evey Nth Cell Along On Same Row
Have often used this site, but now need an answer to something a little more specific. I would like to create a forumlae/function that would allow me to copy a cell value 'x' into every 'y' cell along. e.g copy cell x every 3rd cell along (in same row). The formulae must allow for 'y' to be of any value between 1-5 as this can change. I have attached a screenshot, as pictures are probably much better than my text above.
View Replies!
View Related
Run-Time Error '1004' Cannot Open PivotTable Source File 'Consolidated Report'
I have a macro that takes the date from different excel sheets, consolidates the data and renders the pivot table and chart accordingly. It was working fine when the date range defined for the pivot table was static. Now I have made it dynamic since the data range changes each month depending on the number of days it has got. When I run the macro, it runs succesfully, generates the report and save & close the report, but after that I am getting this error. Errorneous
View Replies!
View Related
Both 'Private Sub Workbook_Open' And 'Auto Open' Run Sequentially
I have built a complex vba & multisheet spreadsheet that I am looking to secure against all the common attacks. So I have:A Workbook Open pw; VBA password (29 symbols/numbers/Caps/lower case) Very Hidden worksheets Hidden rows/columns Restricted scroll areas Workbook protection Code that auto protects all sheets upon opening Registry referencing in Workbook Open with timed closure if not matched Now I am on the last leg of implementing protection against Application.EnableEvents = False; force enabling of Macros and hiding of toolbars, scrollbars etc... Phew. Soooo, in my research, I have learnt that if EnableEvents = False, Workbook_Open is essentially skipped and the security VBA routines are disabled. To get around, I have copied the entire contents of the Workbook_Open routine to a module under Auto_Open. The first line of both these scripts is: Application.EnableEvents = True. Works! So far so good. However, I have a Msgbox prompt in the scripts that displays twice. So in essence, Excel is running Workbook Open first, then Auto Open second. If I open another instance of Excel and run Application.EnableEvents = False first before opening my spreadsheet, I only get one message. So only the Auto Open script runs.
View Replies!
View Related
Error Method 'sheets' Of Object '_global' Failed
The following bit of code has been working fine but has now started getting the following error; Method ' sheets'of object'_global' failed This kicks in on line 3. The worst thing is it will not let me get into the workbook at all Sub KillForm() 'Update Names on Sheets If Sheets("Daily Visits May").Range("e1") = "y" Then Goto 10 If Sheets("Daily Visits May").Range("d1") > 38837 Then Else Goto 10 Worksheets("Daily Visits Apr").Range("B5:C1500").Copy Worksheets("Daily Visits May").Select Range("B5").Select ActiveSheet.Paste
View Replies!
View Related
Network Printer 'ActivePrinter' Of Object'_Application' Failed
I am having trouble printing a page to both a local printer (which works fine) and a network printer (which does not work) Both printers are installed on the Computers. The error message I get when I try to run the macro is Run-Time ERror '1004': 'ActivePrinter' of object'_Application' failed. The codes that I have used are Application.ActivePrinter = _ "\SAUWTPFS01.sopac.pilkington.netDespatch Toughend & Batch reports (L164) on Ne05:" and Application.ActivePrinter = _ " \sauwtpfs01pauwtp0305 on Ne05:" and Application.ActivePrinter = _ " \sauwtpfs01pauwtp0305" It works on the day I record the macro. As soon as the next day comes around I get the error message. When I click debug it is these lines that are highlighted in yellow. I have looked at this for several days on and off and I always get the same error.
View Replies!
View Related
Method 'Add' Of Object 'CommandBarControls' Failed
The following code below was very kindly created for me by someone approx 12 months ago and I have been using it without any problems at all. The purpose of the code is to creates a new Menu/Title item named "Quality" on the main Excel menu bar at the top of Excel and place it between the "Windows" and "Help" This new Quality menu then has further drop lists which i can add as suited. Two days ago i started getting the following RunTime Error everytime i open Excel and i can not longer get the new menu "Quality" to show on my Excel menu bar. run-time error '2147467259 (80004005)': Method 'Add' of object 'CommandBarControls' failed ........
View Replies!
View Related
Adding Folder To 'Open' And 'Save As' Windows
I had this set up in Excel 2003, but our main shared drive just went down and after remapping this link didn't work. How do I do this in Excel 2007? I want a folder to show up on the left hand side of the "Open' and 'Save As' windows under My computer, desktop, My Documents, etc.
View Replies!
View Related
Method 'location' Of Object '_Chart' Failed
I'm currently working on a fairly complex VBA project in Excel 2007. Basically though, I'm downloading information from a site, massaging it, creating a lot of graphs, saving them locally, deleting the chart from excel. I then save a copy of the workbook to a local file, clear the Spreadsheet, and then Do the same for information from another site. When I had all of the code in one Module and ran it as a macro it ran flawlessly. Now i've put the information into a Class. And am pretty much running the same process via a UserForm. The problem I have though is that at any point after I execute the (and please assume that all variables have been declared, because they have)
View Replies!
View Related
Method 'intersect' Of Object '_global' Failed
item = InputBox("Please Select Row Number of Child to be Removed") myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
View Replies!
View Related
Find Value In Column & Copy Entire Row
way to search for a value in a cell (an unique one) using an input box and then if the value is found copying the whole row of the cell onto a new worksheet in the next available row within a table. I am currently using the following archaic codes: x$ = InputBox("Please Enter Catalogue Number") For i = 4 To 500 If Sheet2.Cells(i, 1) = x$ Or Sheet2.Cells(i, 7) = x$ Or Sheet2.Cells(i, 8) = x$ Or Sheet2.Cells(i, 9) = x$ Then Sheet1.Cells(6, 1) = Sheet2.Cells(i, 1) Sheet1.Cells(6, 2) = Sheet2.Cells(i, 2) Sheet1.Cells(6, 3) = Sheet2.Cells(i, 3) Sheet1.Cells(6, 4) = Sheet2.Cells(i, 4) Sheet1.Cells(6, 5) = Sheet2.Cells(i, 5) Sheet1.Cells(6, 6) = Sheet2.Cells(i, 6) End If Next i End Sub this has the problem that i can't fit it to the next available row and have to be specific for each row. it would also be great if i could put a messagebox in cases where the data is not found, basically saying that the item does not exist and if a simple excel Ctrl+F button or something similar could be attached to the msgbox so that the item can be searched and then added to the next available row.
View Replies!
View Related
Copy Range ISO Entire Row
I have below macro button code, when i click on any row and enter button, entire row gets copied and paste in other sheet. Can we ammend this formula so that it should not copy entire row, instead it should copy range from row A to row Q only as i need to utilise other coloums which should not get copied to other sheet. Private Sub CommandButton1_Click() ActiveCell.EntireRow.Copy Sheets("FWD Mary Ann").Range("A65536").End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues ActiveCell.EntireRow.Activate End Sub
View Replies!
View Related
Sorting Certain Columns But Ensuring Certain Rows Remain Fixed To Their 'master Row'
I have created a spreadsheet which is tallying up various data. I have a number of different categories e.g. A, B, C, D and within each one of these are sub categories. I then have a tally for the number of each category and within that the number of each sub category. I then want to sort the data so that first the main category is sorted in order of highest tally to lowest. the sub categories however need to stay with their primary category. I then need to sort each sub category within the main category. the data looks omething like this: category tally sub cat number A 6 A 3 B 4 C 6 B 9 A 1 B 6
View Replies!
View Related
|
TRACKER
