Im trying to compare sheet 1 Column A, with sheet 2 Column A, and then move any duplicates (along with the row of data) from sheet 2 over to sheet 3.
For instance, Employee Numbers that match in both sheet 1 and 2, remove that entire row from sheet 2 to and insert it into sheet 3.
VBA that compares sheets and moves duplicates found in column A to sheet 3 but it leaves the rest of the row on sheet 2.
[Code] ......
I have 10 workbooks which have various calculations and have several links to each other. We use Excel 2003.
For each of these files, I have the following code in the Auto_Open module
Range Range(“TodayComp”) is a date taken form a link in another spreadsheet. It is on Column 3, but the row changes every day as more rows are inserted before it
This sub looks at Range(“TodayComp”) and checks the date on the cell directly above.
If say Range(“TodayComp”) is 6/25/2008, and the cell above is 6/22/2008, it will insert three rows right above Range(“TodayComp”). These rows need to be copied with formulas from the current row above Range(“TodayComp”)
Issue One:
The following code works (it copies the rows), but it takes forever to run, as you can see in bold, I copy and paste each cell, instead of the entire row.
Is there a way to copy and paste the entire row? Remember that I have only a named range to refer to, no cell address as it changes every time.
Public Sub Auto_open()
Update_Dates()
End Sub
Public Sub Update_Dates()
Dim tdy, prev As Date
Dim index, i, j, yr, no_inserts As Integer
Sheets("Comparison Computation").Activate
On 18 worksheets I intend to use variations of the formula below to read ColsD:G and ColsK:N to ascertain whether the values are less then or equal (
View 9 Replies View RelatedI currently have a macro that will sort a given column from A1:A5000. The data set can change from A5000 to A6000 or more. How do I edit VBE to accomodate this?
View 6 Replies View RelatedI have a spreadsheet (XL2003) that calculates some price data based on a specific algorithm. The program then determines which price data meets a certain criteria and if met, will place the value in a column ( Column C in the example WS attached.) If criteria not met the cell is returned empty. Under certain settings, this column could have values in all rows (C9 to C27 in the example) but is usually just a specific consecutive list as in the example.
I have to transfer the calculated values to another spreadsheet so I want just these values to be initially transferred to a separate column (Col. H in the example WS.) from which they can easily be transferred later to the other spreadsheet. I need to figure a way for a macro to check in col. C (ie C9) and if there is a value in the cell, to transfer it to the next available cell in Col H (Starting with H9). The macro would then look at the next cell down in Col C (C10) and do the same routine until the last cell is reached. The transferred data would then end up in consecutive cells in Col. H. I have shown in the example attached how I would want the data to look after the macro is run. I figured this is some type of loop but could not see any examples in the forum that would do what I need.
I have two columns, one with an account number (call it A) and another with a vendor id (call it B). I need the length of the number in column A to be truncated to 10 characters by just deleting any additional characters after 10. That should be based on whether or not the corresponding cell in column B equals the following number "147212336". Right now, my code edits the ENTIRE column A, not just the cell in the same row.
I know it's because I'm using a "FOR EACH CELL" argument but I don't what else would work.
Code:
Set acctlengthrange = Range("N2", Cells(LastRowB, "N"))
Set dplrange = Range("P2", Cells(LastRowB, "P"))
With dplrange
If cell.Value = "147212336" Then
For Each cell In acctlengthrange
cell.Value = Left(cell.Value, 10)
Next
End If
Next
How would my macro below be edited to keep the column sizes the same as they are in the original sheet?
Sub NewUploadFile()
Workbooks.Add
ThisWorkbook.Worksheets(3).Range("A2:K300").Copy
Range("A3").PasteSpecial Paste:=xlPasteValues
Range("A3").PasteSpecial Paste:=xlPasteFormats
Columns.AutoFit
End Sub
I try to edit comments in cells of a certain column and nothing happens. I am able to edit other comments throughout the spreadsheet, but when I select "edit comments" for these particular cells, no edit box is displayed for editing. It worked fine a couple of weeks ago.
View 11 Replies View RelatedI have several Excel files that I am about to change some data in, so I need to create an macro to speed it up. All sheets should be updated besides the last one.
The number of sheets differs between the files. The data that should be changed is in column C, starting at cell C10. But the number of rows differs. If the data in the cell begins with a Q, the Q should be removed, and if it doesn't begins with Q it should be skipped.
I am trying to get information from 1 sheet to another. What i need to do is take the information from sheet 2 column H2:H26 and put it in sheet 1 cell I4. i already have the vlookup information in the other cells that i need but for what i need this for is different than a vlookup. basically i want to be able to type in a name (from sheet 2) in cell I4 (sheet1) and all the information that i need auto populates for me like i already have. I was able to do this with a drop down menu but that wont work as the information will change weekly,
View 11 Replies View RelatedI have some numbers arround 1 lac nos in column 'A'and I want to make a group 200 numbers and transfer it in to next next column .i.e 1-200 numbers in column 'B', 201-400 numbers in column 'C' etc.
View 5 Replies View RelatedI have a form to fill out and I would like a macro to input the data on the form (column) to another sheet in the next open row.
See attached. DATA_EXAMPLE.xlsm
Does anyone have a macro that will delete entire row if column a matches column d
View 6 Replies View RelatedI've run into an issue working on a small project.
The project:
A workbook in which sheet 1 is a form for people to input into 2 adjacent columns time spent on different tasks at the end of each work week. Sheet 2 is identical to sheet 1, but has the intended purpose of storing the data input into the form in sheet 1.
There is a button at the bottom of the form in sheet 1 with an assigned macro that effectively transfers all the data to sheet 2 and then clears sheet 1 for another entry.
The issue:
I cannot get the data to transfer to the next available set of 2 adjacent columns in sheet 2. It keeps repopulating the first 2 columns.
modifying the macro to transfer data to the next available set of 2 columns on sheet 2
I have a lot of data broken up into numeric decimal form in one column. I need all this data to be transferred to different worksheets based on the amount of decimals. Attached is some of the data I need sorted. The first sheet is my main sheet, then the next sheets need to be ascending in numeric order by sorting the data with two decimals under the column Tear number system.
For example I need the next tab to be the data with 0.21 with 2 decimal places, then the next tab would be the data under 0.28 with 2 decimal places, then the data under 0.29 with 2 decimal places. So the 0.21 worksheet would be 0.21 and have all the data for 0.21.1, 0.21.2 all the way through 0.21.6.
I also need this to be compatible with new inserts to the main table. Meaning if a new number is entered in, the number and data would automatically be entered and sorted to the tab that the number pertains to. I have tried a vlookup function but have not had much success. I have also tried recording a macro but am having problems with that as well.
Attached is an example of what I am trying to do.
I am looking to transfer the sums for a calendar month in one column to cells in another location for each month.
I put some notes in the sample attached, I appreicate any help getting this to work.
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
I wanted to separate my cell values with comma into a column
Item
DepIDs
No
IDA
1
2000
1
2000
[Code]...
the output will be below table,
Item
IDA
DepIDs
1
2000
2000
[Code]...
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
I need a formula to automatically transfer data in a column into another column, omitting cells in the 1st column that do not have data in them.
So, for example, transfer the data in column "A" below to column "C" below omitting any blanks when the formula automatically copies data over:
Example Spreadsheet.xlsx
I have a workbook that has multiple functions. One of these function is that when the user select a key word from a drop down validation list, a VB code transfer all information from that row from Column A to column W to the next available row on another tab.
VB:
If Not Intersect(Target, Range("X:X")) Is Nothing And Target.Cells.Count = 1 Then
Application.EnableEvents = False
If LCase(Trim(Target.Value)) = "yes" Then
[Code] ....
Is there a possibility to transfer this information into another workbook. Instead of transferring the info to a tab name "Archives" to transfer in another workbook. This workbook will only have one tab called "Archives".
This will minimize the information within my Initial workbook in project.
The path in the new workbook where the information should be transfer should be in:
"C:Documents and Settings"username"My DocumentsMy Data Sources" to an excel workbook that will be named Archives.
I know that the "Archives" workbook need to open then close after the information has been inserted...
I need to do the following:
I have a list of cities on one sheet. The headers are the counties and below each (6 columns) are all the cities names.
I need to be able to show all the cities of a specific column on a nother sheet (autofilling column down with all cities names) when i type the name of the related county in an adjacent cell.
The subject summarizes what I want to achieve. I just want to tie an if statement to an entire column, so it will disappear if a statement is satisfied.
View 4 Replies View RelatedI'm inserting new information at the top of my worksheet. Unfortunately the formula for what WAS row one: =SUMIF(TotalSales!$B:$B,A1,TotalSales!$H:$H) Will no longer work for row one because as more date is collected row 1 shifts down to row 2. Row two still looks good but there is no longer a formula for the new rows inserted.
To be clearer... I would like to have the following:
=SUMIF(TotalSales!$B:$B,A1,TotalSales!$H:$H) in cell B1
=SUMIF(TotalSales!$B:$B,A2,TotalSales!$H:$H) in cell B2
=SUMIF(TotalSales!$B:$B,A3,TotalSales!$H:$H) in cell B3
How can I keep that formula in row one as I keep inserting new rows?
I have created one excel which contains column with range. (A1:A6). and the drop box included the values as Passed, failed, NA, NC) i have coded the the macro to change color as if i select passed from A1 then A1: F1 will be Red. please find the below code.
Sub Prasanna1()
Range("A1").Select
Select Case Range("A1").Value
Case "Prasanna"
Range("A1:F1").Interior.ColorIndex = 7
Case "Kale"
Range("A1:F1").Interior.ColorIndex = 0
[Code]...
The code is working fine for one row. Now i want to set the same code for entire column A. as if i will select A10 the same range of row should get change with fill color.
I have a work book with a lot of information. In column “W” I have a text comments, cells in this column probably have something or not, and the text is very variable. What I need is an instruction to look at entire column for two key words for example: "na co", "apna" or "apcredit" ... in case of one of these words its found I need the macro to make a process.
For example if in the column W there is any item (cells) with text "apnapo" then
First filter the information:
Selection.AutoFilter Field:=23, Criteria1:="=*apna*", Operator:=xlAnd
Range("K1").Select
ActiveCell.Offset(1, 0).Select
Do Until ActiveCell.EntireRow.Hidden = False
ActiveCell.Offset(1, 0).Select
Loop
Then write down something in columns K & L
ActiveCell.FormulaR1C1 = "Ion Apnapo"
ActiveCell.Offset(0, 1).FormulaR1C1 = "Pamela Elizondo"
Selection.Offset(0, -1).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Offset(0, 1).Select
Selection.FillDown..................................
As the title sugests I would like to Select a cell and a macro will highlight the row and column
Sub Select_Entire_Row()
Dim RowNo As Integer
Dim ColNo As Integer
RowNo = Selection.Row
ColNo = Selection.Column
If RowNo.Value >= 1 Then
Cells(RowNo, ColNo).EntireRow.Select ' I want it to do both not one then the other
Cells(RowNo, ColNo).EntireColumn.Select
End If
End Sub
Need the code for deleting multiple columns simultaneously in an excel depending on some search criteria.Suppose I want to delete the columns whose names are "Roll No" ,"Age" & "Class"
View 2 Replies View RelatedI have two worksheet. One worksheet (ws1) contains a list of item I want. The other sheet (ws2) contains multiple columns where the header (row 6) is named by item name.
I have the following code which deletes the entire column if the header name is not in the list contained in ws1 :
VB:
Sub delete_col()
Dim wanted As Boolean
Set ws1 = Workbooks("test1").Sheets("aaa")
[Code]....
First of all, this loop does not work properly since deleting the entire column shift them on the left, so when I first analyze column 11, if I delete it and then analyze column 12, the real column 12 now became column 11 and so on...
Secondly, this code is pretty slow. I am pretty sure I don't have to loop through my initial item list everytime I do Instr on a new column.
i know how to make a drop down list and then I can strech it over X rows but how do I set somthing like from C3 and forever onwards (C4,C5,C6..)use this droplist. I do not know how many entrys will be made so from C3 and onwards I need all cells to have this drop down menu.
View 2 Replies View Related