I have two sheets and I want to copy the values in a row in the first sheet to the second sheet. I am doing the following:
Sheet2. Range("A1").Value = Sheet1.Range("A1", Sheet1.Range("A1").End(xlToRight)).Value
But this only copies the value of A1 in Sheet1 to A1 in Sheet2. How should I modify it to copy the values for the whole range to the second sheet?
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedI need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
see attached workbook.
I'm attempting to count the empty cells in column C which correspond with the project reference shown in column A. I only want to perform this calculation where the project numbers change (see desired results in column D).
Am struggling with finding a way to define the different range of rows for each project ref within the formula. The full sheet has over 6000 rows and 1500 project refs.
Is there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx‎
I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
View 5 Replies View RelatedIs this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View Related1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
Is there an easy way that if any cell in column A is blank it can copy the value from the closest non-blank cell above it? I eventually have to export data from a workbook into a database. But I cannot have any cells in column A as null or blank.
1. There are no blank rows, and at least 1 cell in each row has a value.
2. The person who constructed the sheet did not fill in all cells in column A for each row, they imply that if the cell is blank then it belongs to the same value as whatever the cell above it has. Ie, all similar rows are grouped together.
3. Of course, I only need column A filled in for rows that have data in at least 1 of their columns.
4. Simple worksheets with no formulas to worry about.
Additionally, if it is possible to get a macro so I can apply the code to all worksheets in my workbook at once, can I get that too? In the example below (where .... are blanks) I would like A2 to read 'Fruit' and A4 to read 'Meat'
ColA ColB Colc
---- ----- -------
Fruit apple red
.... grape green
Meat ham pink
.... beef brown
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
I need a macro that will start in a cell, copy all cells below it (CTRL+SHIFT+ARROW DOWN) with data in that column, create a new sheet in a seperate workbook, paste only the values, return to the original workbook, move one column to the right, repeat the copy/paste until the cell it moves to is empty.
View 2 Replies View RelatedHere find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedI would like to paste my manually copied columns to another sheet next to an empty column. And start paste on column E if not empty using a command button as trigger
Like if i manually copy column B from sheet1 and paste it to sheet2 column E if not empty.
Need code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the
Sheet3.Select
Range("A1:A10").Select
Application.CutCopyMode = False
Selection.Copy
Sheet2.Select
Dim LastCell As Range
With ActiveSheet
Set LastCell = .Cells(.Rows.Count, "A").End(xlUp)
If IsEmpty(LastCell) Then
'do nothing
Else
Set LastCell = LastCell.Offset(1, 0)
LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End If
End With
but I cannot find a way to change this to columns!
I am in the middle of writing a complex loop macro..
and need to be able ask it to only copy over information if a cell has any value/word in it..
I know how to write if it doesnt have a value
i.e do while activecell = ""..
But what if the ceel has any value.. i.e even if its letters/numbers and they are never the same..
Suppose I have a column with a lot of different hours in each cell. I have already inserted a blank line between each cell in this columm and know I need to repeat the hour just above the blank cell onto the blank cell,like the example below:
Present worksheet:
00:08:32 8765.987 7654.876
xxxxx blank linexxxxx
01:35:41 123.456 9876.543
xxxxx blank linexxxxx
Future worksheet:
00:08:32 8765.987 7654.876
00:08:32 7654.876 xxxxxxxxx
01:35:41 123.456 9876.543
01:35:41 9876.543 xxxxxxxxx
So, in brief steps, I need to:
1. insert blank lines between each row
2.copy the content of the cell of the first column (just above the blank line) to the cell just below it, in order to repeat the time
3.copy the content of the cell of the third column (just above the blank line) to the cell in column 2 (on the blank cell in column 2 of the blank line just created)
I got 3 columns of cell values as follows:
Demo 1
COL A COL B COL C COL D
_ 12 14 16
_ 32 12 18
_ EA LW RA
Demo 2
COL A COL B COL C COL D
12 12 14 16
32 32 12 18
EA EA LW RA
14
12
LW
16
18
RA
Can data of the 3 columns be copies (by vba code) to the blank col A in the exact sequence as shown in Demo 2?
Copy and paste data if row in Column N is empty.
Here is my current code
code to copy a cell formula all the way down the same column to the cell where its next immediate row is completely empty.
View 6 Replies View RelatedWhat I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I got the following formula to get data from the "data"-sheet into the "werkblad"-sheet. If the regarding cell on the "data"-sheet is empty the result on the "werkblad"-sheet will be "0"
View 2 Replies View RelatedI need to write a VBA code to remove the value of the cells in column B if the value in column A is empty. In my excel sheet, the user will paste hyperlinks in column B. If any link does not meet certain conditions, the cell in the same row in column A will be empty.
I want to have a change event so that after pasting links, it automatically deletes the links from the cells in column B if the cell in column A is empty