Copy Cells To Empty Column Each Time And Remove Blanks
Oct 24, 2008
Is there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
View 9 Replies
ADVERTISEMENT
May 29, 2013
Some code that will remove blank cells from across five columns (A:E) so that after running code all data in each column moves to the top of sheet?
View 9 Replies
View Related
Sep 26, 2013
I need to write a VBA code to remove the value of the cells in column B if the value in column A is empty. In my excel sheet, the user will paste hyperlinks in column B. If any link does not meet certain conditions, the cell in the same row in column A will be empty.
I want to have a change event so that after pasting links, it automatically deletes the links from the cells in column B if the cell in column A is empty
View 5 Replies
View Related
Dec 8, 2009
In a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.
I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.
I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:
http://www.excelforum.com/excel-work...om-a-list.html
Columns A:H in the same worksheet are populated and unavailable for use.
View 8 Replies
View Related
Aug 23, 2006
Have the marco (see Code below)that I am trying to pull only records that have a "y" in a column. The problem I am haivng is that I also get cells that are blank and rows are skipped if the cell is blank or not "y".
Have tried searching for an answer or example for what I want to do. Looked at autofilter but had no luck.
Sub Macro1()
Set rd = Sheets("ActiveHerd") 'set read data sheet as rd
Set wd = Sheets("SaleSheet") 'set write data sheet as wd
For i = 12 To Range("A65536").End(xlUp).Row ' set i to the last row in column A
If UCase(Cells(i, 1)) = "Y" Then Range("A" & i & ":c" & i).Copy Destination:=wd.Range("AA" & i)
Next i
End Sub
View 9 Replies
View Related
Aug 24, 2008
find out the last blanck cell in the row. ex: 1 2 0 5 6 0 0 5 0 zero it means blanck i prefer using fx function but i can use also Macro
View 6 Replies
View Related
Aug 7, 2007
I need a macro that will take the values that are in the far right cells and move them to an area on the left. the columns they will be pulling from are the IU & IV column starting with row 2 down to row 460. from there I need the values to be pasted into the D & E Columns starting at row 6. The two columns IU & IV are a date and a task for that date. When they are pasted into the columns D&E they will need to be sorted by dates (or just all of the blanks removed), with the soonest occurrence at the top. The reason for pasting values is because I have formulas pulling the tasks and dates off of another sheet. The last thing is that the macro needs to be triggered by the information in cell c2, when that cell is changed the formulas go to work and everything in cells IU & IV update. That is when I would like the macro to kick in and work the miracle.
I have been trying to build a colony of formulas that could do it, but I have given up, then I tried to make an array index it for me, but that wasn't working for me either.
View 9 Replies
View Related
Mar 8, 2014
I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
View 4 Replies
View Related
May 20, 2008
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
View 5 Replies
View Related
Apr 8, 2008
I have two sheets and I want to copy the values in a row in the first sheet to the second sheet. I am doing the following:
Sheet2. Range("A1").Value = Sheet1.Range("A1", Sheet1.Range("A1").End(xlToRight)).Value
But this only copies the value of A1 in Sheet1 to A1 in Sheet2. How should I modify it to copy the values for the whole range to the second sheet?
View 9 Replies
View Related
Sep 5, 2013
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
View 9 Replies
View Related
Jun 26, 2009
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies
View Related
Oct 2, 2013
I'm needing to import a .csv into another software and it needs the fields formatted a specific way.
The spreadsheet I've been given has columns for different departments and an X to denote if they fall under it. As an example.
Name
Sales
OHS
HR
Joe Bloggs
X
X
Bob Smith
X
John Doe
X
X
For the import into this software it needs the fields like this, the name in the cell has to be exactly the same as the column header.
Joe Bloggs
Sales
HR
Bob Smith
OHS
John Doe
OHS
HR
Is there an easy formula to scan the row, if an X is found substitute the X for the column header text and if no X in a cell delete it and shift all cells to the left within the row ?
The substitution is quite easy and I've played around with lookup or if statements to quite easily do that but the bit I'm having trouble sorting is removing any unnecessary cells in that row so only cells with data are listed in the row.
View 1 Replies
View Related
Oct 5, 2011
Is there a way of removing empty cells from a range whilst preserving the top row? As an example, I want to change this spreadsheet...
a b c d r
rrr
rrr
[Code]....
View 3 Replies
View Related
Oct 1, 2003
it is possible to hide empty cells when using a ComboBox in a UserForm?
I have named the range from where I select my data and used the RowSource (ComboBox Properties window) to determine the selection. This works perfectly but I have many lines that are empty and I would like to know if they can be hide, or not selected, in the combobox.
View 4 Replies
View Related
May 8, 2014
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
View 5 Replies
View Related
Sep 14, 2009
I have the attached a workbook (& the code) which merges the worksheets from 7 different workbooks together into a 'Raw data' worksheet in my master workbook. It is driven off a parameters table which allows you to select which workbooks/worksheets you want to include in the merge. - The code works fine however when it is copying the data from each worksheets it is just copying all the data as a 'block' copy where I need it do do it row by row becuase I dont want to copy the row if colum C in each row contains no data, ie. it is blank.
So in my code I need another loop which will: Copy data from column A - E for each row if column C is not blank. Paste into Column B - F in Raw Data worksheet (as column A contains the source filename) Loop until it reaches no more data. I adeeally just want to copy the specific range as above, not the whole row but either will do. This is my code, refer to attachment too which includes master workbook and an data entry workbook where the data comes from.
Sub OpenWorkbooks()
Dim Book_Name As range ' List of available books
Dim Sheet_Name As range ' List of available sheets
Dim dLastRow As Long
Dim oLastRow As Long
Dim sLastRow As Long
Dim DestinationSheet As Worksheet
Dim SourceSheet As Worksheet
Dim WorkBookList As range
Dim WorkSheetList As range
Dim WorkbookPath As String
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
'set source and destination sheet
Set DestinationSheet = Sheets("Raw Data")
Set SourceSheet = Sheets("Parameters")........................
View 5 Replies
View Related
Jan 9, 2014
In cells A71:A140 I have the following formula: =IF(A4"";A4;"").
How can I select only the cells in range A71:A140 where the formula has returned a value (number or text) and not the blank cells? When I try ctrl + shift + down arrow, all cells in the range are selected...
View 2 Replies
View Related
Apr 4, 2008
trying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.
The times have been entered as actual times of the day, formatted for AM/PM.
A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.
I attach a sample of the sheet.
View 3 Replies
View Related
Mar 7, 2007
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
View 2 Replies
View Related
Jul 2, 2014
I would like to paste my manually copied columns to another sheet next to an empty column. And start paste on column E if not empty using a command button as trigger
Like if i manually copy column B from sheet1 and paste it to sheet2 column E if not empty.
View 1 Replies
View Related
Jul 10, 2009
Data is in a horizantal list, say row 2:
A2: SAM
B2:
C2: MARY
D2: JOE
E2:
F2: DAViD
i.e. like this:
SAM-blank-MARY-JOE-blank-DAVID
I am looking for formulas (not VBA) to compact this list by removing the blanks so the new will be placed in K2, L2, M2 etc. as follows:
SAM-MARY-JOE-DAVID
This is a good article but only works on vertical lists:
[url]
View 12 Replies
View Related
Oct 24, 2006
I need to generate a list of items from a column of data which frequently changes. In the attached example, I need to list all entries other than those that are blank (NB - the data generates the numbers as text and the blanks as "").
View 8 Replies
View Related
Jun 9, 2007
Need code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the
Sheet3.Select
Range("A1:A10").Select
Application.CutCopyMode = False
Selection.Copy
Sheet2.Select
Dim LastCell As Range
With ActiveSheet
Set LastCell = .Cells(.Rows.Count, "A").End(xlUp)
If IsEmpty(LastCell) Then
'do nothing
Else
Set LastCell = LastCell.Offset(1, 0)
LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End If
End With
but I cannot find a way to change this to columns!
View 7 Replies
View Related
Sep 18, 2007
I am in the middle of writing a complex loop macro..
and need to be able ask it to only copy over information if a cell has any value/word in it..
I know how to write if it doesnt have a value
i.e do while activecell = ""..
But what if the ceel has any value.. i.e even if its letters/numbers and they are never the same..
View 4 Replies
View Related
Oct 20, 2007
Suppose I have a column with a lot of different hours in each cell. I have already inserted a blank line between each cell in this columm and know I need to repeat the hour just above the blank cell onto the blank cell,like the example below:
Present worksheet:
00:08:32 8765.987 7654.876
xxxxx blank linexxxxx
01:35:41 123.456 9876.543
xxxxx blank linexxxxx
Future worksheet:
00:08:32 8765.987 7654.876
00:08:32 7654.876 xxxxxxxxx
01:35:41 123.456 9876.543
01:35:41 9876.543 xxxxxxxxx
So, in brief steps, I need to:
1. insert blank lines between each row
2.copy the content of the cell of the first column (just above the blank line) to the cell just below it, in order to repeat the time
3.copy the content of the cell of the third column (just above the blank line) to the cell in column 2 (on the blank cell in column 2 of the blank line just created)
View 8 Replies
View Related
Oct 24, 2012
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
View 1 Replies
View Related
Dec 29, 2009
Copy and paste data if row in Column N is empty.
Here is my current code
View 2 Replies
View Related
Aug 19, 2006
code to copy a cell formula all the way down the same column to the cell where its next immediate row is completely empty.
View 6 Replies
View Related
Aug 23, 2007
I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
View 5 Replies
View Related
