I have a userform and I want a textbox that counts cells J7,M7,P7,S7,V7. Does anyone know how to write this code and where to put it. All I want is the textbox to show how many cells of these five have data in them and I want it to update automatically.
i would like to create a userform with a textbox to enter a product code , a command button to run VBA and a big text box to show output of VBA from Textbox 1 which i will connect to DB and pull back information relevant to that product code , is this possible i can create the userform no problem and already have code to pull back from DB into Excel ,
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”. I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
I have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.
I have an userform say frmNew. In the form, I have three textboxes: txtCost, txtRate, txtSale.
The following two boxes are filled by a user: txtCost contain the Cost of an item (numbers) txtRate contain the % Rate (3 character), i.e. the txtRate can contain only A,B,C,D,E,F,G,H,I and J. The corresponding value is 1,2,....9,0 respsctively. If a user enters any numbners or characters other than A,B,..J, a msgbox should popup with a error message.
The value for txtSale is generated by the Macro i.e. txtSale = (txtCost + (txtCost * txtRate)).
Could anyone offer advice on how I would go about accomplishing this task? I'm trying to format two textbox fields on my userform that when the user inputs data into it, it would automatically show the "symbols, dashes and/or spaces accordingling".
The first textbox field (TextBox9) I need to end up looking like this, with the numbers and/or letters changing by user input. example: (MI) A000-000-000-000
The next textbox Field (TextBox10) I need to end up with this type of result: example: (MI ID) A000-000-000-0
I was trying something like this but I'm not familiar enough with the formatting symbols to accomplish this task.
I am trying to update a Textbox from two Listbox's and several Textbox's as the user enters values (or double clicks the textbox for a value). (DoubleClick code is completed). I have ten textbox's to enter data into (or double click for prior data stored in the registry). Two Listbox's requiring one selection each. The last textbox (textbox11) produces the text as it is being entered from the previous ten, I currently enter the data in a specific order to build my string, which I want to stick to. If the user has entered the wrong data in any of the active textbox's I would like to be able to update the string shown in textbox11 without losing any data from the string.
Hence where my brain cells are popping. My current code (laughing is a pre-requisite). Is in the next two posts due to character length restrictions (no dis intended). Attached is a screen shot of the userform. In the textbox labeled "FCF" all the data you see that is not in any of the textbox's or listbox's is written in from code.
I'm a bit stuck with one of my userforms. I have a username textbox on my workbook logon screen. I have put a max length on the textbox to 7 characters. I have also added a bit of code which stops the user from entering anything less than 7 characters (once the commandbutton is clicked, a msgbox comes up), and the textbox will show text in upper case.
What I would like is a way to "format" the textbox. All of the usernames will be in the following format: BBAAA11. The first 2 characters will always be "BB". The 3rd, 4th and 5th characters will be any combination of letters (for example... "CAM", "EAL", "BEF"). Finally the last 2 characters will always be any combination of 2 digits (for example... "76" "24", "00").
If someone could provide me with some code which will not allow the textbox to type anything other than the specified format, or for a msgbox to appear once the commandbutton has been clicked to say that the incorrect format has been entered, I will be most grateful.
Userform1 is a basic search and find using the text the user enters in a text box, followed by 'ok' commandbutton.
If a matching cell is found in the worksheet, the row is selected and the second userform asks for text via textbox2. This text will be placed in the end column of that row (column L) that was found to have the text input in Userform 1.
What's important is that if on that row some text already exists in column L, that this appears in textbox2 allowing the user to modify it.
I don't want the end user to do anything to TextBox2 (I've got it set to Enabled=False). I would like TextBox2 to populate in $$ format based on a formula : TextBox1 % x Range("Sales_Price")
I can get TextBox2 to populate correctly, but I can't get it to convert to $$ format. Everything I've come across uses the 'Exit' or 'AfterUpdate' event - but I don't think I can use these events since the User won't actually be doing anything to TextBox2.
I'm trying to make an excel sheet that will fill in labels to a 96 well plate in order to sort and calculate the data. The problem is when i set up the textbox in the user form i want it to pull data on the plate format from cells that have already been filled in using another userform i have created for the standard curve.
My userform has 96 text boxes (one for each well in the plate). They have been named A1 through H12 corresponding to the wells. What I have written is:
Private Sub PlateFormat_Intialize() A1.Value = Range("Q2").Value End Sub
with Q2 being the cell in the workbook that it should pull the text from
The userform always loads with the textbox blank.What am i doing wrong? I tried activating the correct sheet in the workbook first that doesn't work. I included a command button where i put the same value code in and then it will update. I don't want to have to update the form however. I want it to load with the cells filled in.