Copy & Paste Data Based On Current Month
Jun 29, 2007
I have created an action plan in Excel, with a column containing the values Yes, No and Partial to show prgress against the actions. I have used CountIF (in cells D72 to D74) to count the number of each Yes, No and Partial. I want to be able to put these figures in a chart each month. I am using columns F to Q for the chart data. the headings of the chart columns are month values, e.g, F1 is "6" (for June).
I have used Month(Now()) to generate the current month value in cell B1. I now need a macro that will check the value in B1 against the chart table headings in F1 to Q1 and if it finds a match, will copy the values D72 to D74 into the chart table below the relevant heading.
View 8 Replies
ADVERTISEMENT
Feb 25, 2014
In sheet1 I have different dates include different month as well.
I want to copy and paste current month data to sheet2 with command button.
View 5 Replies
View Related
Jan 21, 2007
I have a tab set up to display information that has been colletect on other tabs. What I would like to do is change this information depending on what month is selected.
For example, if I select December then data would be pulled from other tabs and displayed. If I Select June the information would change and select other data from the same tabs.
View 9 Replies
View Related
Sep 5, 2007
I want to paste a cell value into a column that is a certain month based on a date inserted by the user. For example, in cell a1 is 1000 in cell a2 is 01/01/2008 so i would then want this to be pasted in the same row and then column called january 2008.
View 3 Replies
View Related
Apr 21, 2007
Sub moveit()
Dim MyRows As Double
Dim TotalRows As Double
Dim Counter As Double
Dim StartRange As Variant
Dim Newrange As Variant
MyRows = InputBox("This macro will copy and paste the current data into mupltiple columns. Make sure that you have at least one cell in the targetted region of data selected. How many rows deep do you want the finished data to be?") - 1
StartRange = ActiveCell.CurrentRegion.Cells(1).Address
TotalRows = Selection.CurrentRegion.Rows.Count
Counter = 1
Do Until Counter > (TotalRows / (MyRows + 1))
Newrange = Range(Range(StartRange).Offset((Counter * MyRows) + Counter), Range(StartRange).Offset((Counter + 1) * MyRows + Counter, 2)).Address
Range(Newrange).Copy Destination:=Range(StartRange).Offset(0, Counter * 3)
Counter = Counter + 1
Loop
End Sub................
View 4 Replies
View Related
Aug 20, 2013
Basically, I'm doing a recorded macro for work where I take an export and manipulate the data to show differences between sales from last year and this year. Also comparing this months projected sales to avg of last 6 months and also against last years this month.
The problem I'm running into is in automating the this month sales for mid-month exports. I can do it individually but I can't find a formula that will do it. Data is in one cell per month, so ex. 130 sales this month so far. I need to have it convert that to projected sales for total month based on what day it currently is.
View 1 Replies
View Related
Aug 15, 2014
I have a spread sheet with towns listed in Column G from row 3-81. I months going across row 2 as column labels (they are dates in Jan-14 format). They go from column H-AF.
What I want to happen is to have a formula (not in VBA) which will compare the month in row 2 versus the current month. If it is more than 5 months ago I would like it to return the town in column G for the corresponding row. The only thing I am using to "mark" the last time the town was worked is an X so that is all it needs to look for.
View 9 Replies
View Related
Nov 30, 2009
Is There a formula for current Month based on system clock....
View 10 Replies
View Related
May 19, 2014
I have sheet1 where there is a data.
Column A has dates and column F, G, H have some text with ',' ( e.g. Paper, wall, taps...etc)
I want to now combine text values from Column F ( rows of current month only) and place them in sheet2 in one cell with ',' in between text and not showing same item twice.
Sample book attached ....
View 10 Replies
View Related
Dec 5, 2009
I have written some simple code to pull up internet explorer, enter info. into a text box on the web page, and then submit the form. How do I capture the current URL that's in I.E. and put it into Excel, without knowing what it is beforehand.
View 2 Replies
View Related
Jan 6, 2013
I have series of data values like below. I have to find Maximum, Minimum values for each of these values.
9430
9822
10070
[Code].....
View 2 Replies
View Related
Aug 3, 2006
I have a detailed note inside biweekly.xls, it explains everything in context.
Two excel sheets, one is updated manually (Vikki's Yearly Averages.xls), while the other is for reporting (biweekly.xls)
The coding will all be in biweekly.xls.
First, it needs to take a date to the right of a name from biweekly.xls and use the month and year from that date for the search.
Then it needs to look in VYK.xls under the name and copy every entry starting in the year specified and month specified and ending at the current date.
View 6 Replies
View Related
Aug 1, 2014
I have to Browse 3 excel sheets and copy the sheets from those excel sheets and paste in one sheet of current active excel sheet.
all the data from 3 excel sheets should be present in one sheet of current excel which is one next to other.
View 1 Replies
View Related
Jan 30, 2014
I have an Excel Spread Sheet that lists all of the people who have been issued Keys in your workplace, so the row has multiple information columns (Name, Department, Key Code, etc). One row is titled "Left Workplace" and you can select either a Yes or a No. Based on that selction I want it to copy and paste into a different spreadsheet (Either Inactive - if "No" is selected or Active - if "Yes" is selected) What is the best way to go about this?
View 2 Replies
View Related
Apr 24, 2014
This code basically copies data from one worksheet to another worksheet based on the date and works great.
However, I have been asked to changed the format of the spreadsheet and the code needs to be changed. The code is in "This workbook".
The code takes the data from the summary tab and copies it to the archive tab. I now need it to take it from the summary tab and copy it to the archive 2 tab.
I have attached a copy of the spreadsheet. Data and Archive2.xlsm
View 8 Replies
View Related
May 2, 2014
I have a workbook containing sheet 1 and Sheet 2
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135)
A
B
C
D
FIND NEW PO
Purch.DocItem
Vendor
Vendor Name
200095185710
200095185710
15152695
UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
(=IF(B2>0,IFERROR(VLOOKUP(B2,Sheet1!$A$2:$A$20182,1,0),"NEW"),"")
The possible results are : Numbers>0, “NEW” and “” as you can see in table Sheet 2
View 1 Replies
View Related
Jan 28, 2014
I would like to copy and paste the values from a worksheet (HS-Detail) in a file to different tabs depending on the value in column A (Regions). I have a macro that works but it pastes the formulas and it takes quiet a while to run due to the number of records. How can I alter this to paste just the values and speed up the macro?
[Code] ......
View 3 Replies
View Related
Sep 28, 2009
I have the following data:
column a: column B:
1
7
9
25
I need a formula to make column B equal to the current month adding the day in column A. so that column B equal the following:
column a: column B:
1 09/1/2009
7 09/7/2009
9 09/9/2009
25 09/25/2009
View 3 Replies
View Related
May 6, 2014
The sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
Masterfile.xlsm
View 1 Replies
View Related
Apr 14, 2014
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
View 11 Replies
View Related
Mar 20, 2009
I have log data in two columns:
Column A: Date/time (at 30 minute intervals)
Column B: Numeric data
On the last row of each month, Im trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
Im having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but Im not sure how to make the first array dynamic or if this is even correct approach.
Manual
=IF(OR(MONTH(A1009)=A4)*(A$4:A$65536
View 9 Replies
View Related
Jan 21, 2010
I have a spreadsheet for monthly supplies. In row 1 is Jan Dec and in the row 2 below are empty cells where there will be a total for that months purchases. I want a conditional format formula to automatically bold and highlight the current months total and month name.
Also, when I enter February totals next month and that number is input into Februarys total, I want that month and total to bold and highlight BUT I also want the previous months bold and highlight to vanish at the same time. Is this possible?
View 9 Replies
View Related
Sep 4, 2006
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
View 9 Replies
View Related
Oct 4, 2009
When VBA copies from a .csv spreadsheet to an excel spreadsheet, the days/months in the date become reversed. So 12/5/2009 becomes 5/12/2009.
View 3 Replies
View Related
Jul 18, 2012
the MONTH(NOW()) Function, as I need it to reference the month preceding the current month.
View 3 Replies
View Related
Mar 8, 2014
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx
View 4 Replies
View Related
Dec 8, 2012
I have a spreadsheet witht the following design:
Column A = Date
Column B = Value 1
Column C = Value 2
I have a folder with excel files named by date (e.g. 081212 = 8th December 12). Within each of those files is Value 1 and Value 2. They are always in the same cell (B6= Value 1, B16= Value 2).
How can i create a macro/script where the Values in Column B and Column C in my spreadsheet are automatically updated where there is a Date in Column A but no values in Column B or C?
In other words, i need the script to read the date in Column A and if Column B and Column C are blank, then it needs to find the corresponding date excel file and copy Value 1 and Value 2 into the cells in my spreadsheet.
View 3 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Nov 25, 2012
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
View 2 Replies
View Related
