I have tried to create a macro which prints the results of each heading in a drop down box. The listfill range is from B2 to B5 and the linked cell is B1. When manually recording the macro, i copy the heading from B2 into B1, the drop down list updates which in turn updates the cells which are linked to that, i then print out the page. The same happens when i copy-paste cells B3, B4, & B5 into B1. I then return finish the macro by copying B2 into B1.
But when i run the macro, the copy paste works but the drown down list doesnt update, therefore it doesnt update my linked cells so i acutally end up printing 5 indentical pages with the same info.
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
1. Copy cells B5 to V-First blank row in Strength Tests worksheet 2. Paste cells into Racks worksheet in cell C5 3. Change font size to 6 4. Sort by Column T descending then by Column C ascending 5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet 6. Paste row into M1 worksheet in cell D4 7. Print M1 8. Drop down one row on the Racks worksheet 9. Repeat steps 5-8 until there's a blank row.
I want to make macro that copies values in a1 to a100 to cell c10 everytime I click enter.(first enter a1 to c10,second enter a2 to c10 and so on to the end of the list).
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
I am a trainee dermatologist. We undertake allergy patch tests. There is a long list of different patch tests which are selected based on the patients history. I have put each of the types of patch testing on a master sheet. What I would like to be able to do is to have a control button next to each set, and when clicked would add that particular set to a "new patient" worksheet tab. And with every set having its own button, more than one set could be added to a new sheet. In the new patient worksheet id like the sets added with a single row gap between them.
I had tried, and managed to get a single series to work, but then it wouldnt allow me to add the next set, saying that sheet already exists. Ideally finally, id like there to be some way, or message to make sure after printing the new patient worksheet gets deleted. I hope that all makes sense ! Even if I had a code for a single button that added to a master sheet at the next available row +1 I think I could manipulate the code to suit.
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
I need to have a drop down list which displays a different set of values depending upon the value selected by a previous drop down list. ie. (drop down box 1)= x, y, z. (drop down box 2)= either x1, x2, x3, or y1, y2, y3, or z1, z2, z3. I can produce a single drop down box thats not a problem but linking several drop down boxes is beyond me .
I have A dropdown list (form control combo box) ...in that the values are jan,feb,mar,apr... property of cell link is given as C4..... now my doubt is suppose if i select mar from drop down, in sheet the cell C4 should Show Mar only.....
When someone makes ANY selection from my drop-down list, I would like my macro to run so that the user can continue to fill in the rest of the form. My macro simply unhides some rows as below:
Sub UnhideForm() Application.EnableCancelKey = xlDisabled ActiveSheet.Unprotect Password:="Testing"
Here's some info you might need:My sheet is called "Form" My macro is called "UnhideForm" My drop-down list is in the array called "TypeOfMoveCell" I have 5 dropdown options (which includes an option called "Please select from list...") These options are located in cells BW145:BW148. I would also like the macro to re-hide the data rows if someone deletes the value in the drop-down list, or if someone re-selects "Please select from list..." option.
I have a macro which output depence on the variable input. Input is represented by drop-down list. Before, I was choosing input from drop-down, then pressing the button my macro was running. Now, I'm thinking to if it's possible to exclude a spare operation from button pressing, just by clicking from drop-down.
My drop-down list is created through "Data->Validation->List box"
I'm able to create a simple User form Drop-down list that references a cell range list. ( as a test for myself) I have 4 separate macros I would like to run individually. Rather than create 4 separate buttons, I'd like to be able to select each one via Drop-Down list.
I am using INDIRECT to create a second dynamic drop down list (L1) that is based on the cell contents of a first drop down list (I1). I want to create a macro that will blank the 2nd drop down list ONLY when the choice in the first list is CHANGED. I have the following, but it blanks the second list as soon as the first list is clicked on, rather than when a change is made:
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Not Intersect(Range("I1"), Target) Is Nothing Then Range("L1").ClearContents
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
1. When a user clicks on a Drop down box and selects "Add New", I would like a Macro to run
2. I want this Macro to open up a Dialog/Text box to say "Enter New Information" where the user can enter in some text
3. The text that is entered by the user into this box will be added as a new entry into the Drop down box selection
My VBA knowledge is still at a beginner's level and I know how to get a Macro to run based on a cell value. However I don't know how to create a Macro for the dialog box nor do I know how to create a Macro for updating the drop-down items.
I have a drop down box in column N, however I would like the options in that drop down box to change depending on what appears in column M.
If column M Says "Lapse" then I want one drop down box to appear in column N, If coumn M says "NTU" then I would like column N to show different drop down options.
I have a dynamic list of names from B2:B500. I want to write a macro that finds all the unique entries from that list and pastes it to AD3:AD501 everytime the macro is run. What would be the code for this procedure.
with the following....In the first sheet of attached file I keep data regarding all invoice sheets next to the data sheet (not visible in this example). I like to print an invoice in all sheets (area H3-AI43) from a selected invoice sheet out of a drop-downlist in the "data"sheet. After printing the actual printdate must be placed in column F of the "data" sheet next to the sheet number. Would be great if this is possible! Maybe I'm not clear enough. The purpose is to print only 1 invoice from a selected sheet out of the drop-down list.....and not all invoices from all sheets!
I am trying to create a Macro to pull from a list and then update the charts and print. I have a list that has over 100 clients. I believe I need to loop but I am not familiar with VBAs at all. Below is what I am trying to accomplish.
Someone created a macro for me that creates and names worksheets based off of a list on my first worksheet "Summary". I would love to be able to then have the list of titles on Summary sheet be in cell A1 on each of the worksheets that I had created.
Here is the macro for creating all of the worksheets w/ names -
The source data is collected using drop-down menus. In moving the data from one workbook to another, the drop-down lists are carried over into the destination cells. I have used both: paste special "values" and paste special "valuesandnumber formats". The code in the else statement produces the same result as the 2 step process above it.
On the attached worksheet I am selecting items from the "Description" dropdown list on the Invoice worksheet. I then would like to find a way to automatically copy and paste the "Item #" and "Unit Price" found associated with the selected item on the database worksheet "Products".
i.e. I select the product and the spreadsheet fills in the rest of the required info.
I have two worksheets 1) PL dbase and 2) Waiting list. Both setup as Lists. Where Excel automatically inserts a new row as you click in the current rows... I want to autofilter Waiting list column I for the value of "Yes" Copy all the data autofiltered in Waiting list to the next available row(s) on worksheet PL dbase.
I have a sheet which autofilters according to a validation list in cell E2 using the code.
I have then used subtotal arrays to calculate the mean, median, max, min and total count for whichever values the filter shows.
What I want to do next is have a code which will select each possible option from the validation list (triggering the autofilter) and copy and paste the values from each dependent formula into a new sheet.
I have recorded a macro to filter data on sheet 'To Invoice' copy the filtered list, and paste on sheet 'Invoice' in C16.
The code just keeps looping (not looping in a code sense, it just seems to keep flickering the screen like its going over & over) until it locks up 5-10 seconds-ish and then I have to re-start Excel.
The range B2:E22 is not always populated, it could possibly be B2:E2 (one row), I dont know how to copy the exact data so I expanded the range to what I think would capture any eventuality....
