Macro To Copy/paste Specific Rows (and Formulas) Based On Drop Down
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
View Complete Thread with Replies
Related Forum Messages:
Macro To Paste Formulas As Values On Specific Pages
I have a macro that pastes formulas as values on specific pages (("CTY EME", "Int Center", " Total SW dist cost", "Int, pubs & oth", "Total". Is there a way to compress the macro ie with the sheet names?
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
Application.CutCopyMode = False
Copy/Paste Rows With Specific Values
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
Macro To Copy Paste Values And Formulas
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
Copy Paste Print Macro For Drop Down List
I have tried to create a macro which prints the results of each heading in a drop down box. The listfill range is from B2 to B5 and the linked cell is B1. When manually recording the macro, i copy the heading from B2 into B1, the drop down list updates which in turn updates the cells which are linked to that, i then print out the page. The same happens when i copy-paste cells B3, B4, & B5 into B1. I then return finish the macro by copying B2 into B1.
But when i run the macro, the copy paste works but the drown down list doesnt update, therefore it doesnt update my linked cells so i acutally end up printing 5 indentical pages with the same info.
Is there anything i can do to get around this?
Macro listed below:
Application.CutCopyMode = False
Copy & Paste Specific Number Of Times Based On Value
I enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
Copy & Paste Specific Column Based On Cell Reference
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
Macro To Copy Specific Data From One Sheet And Paste Into Two Sheets
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
Running Macro To Copy Rows Of Formulas
I have 2 speadsheets, I want to copy rows of Formulas from Spreadsheet 1 and copy them into Spreadsheet 2 but convert them into Values.
Is it possible to create a button on Spreadsheet 1 and assign macro to do exactly what i want? I also want the macro to look for the first empty row in the database so that the information being copied are on the next row and not overwritten.
Macro To Find Required Data Than Copy/paste In Specific Cell Address
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
Copy Paste Multiple Criteria Based Rows To New Sheet
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
Copy Rows Based On Criteria, Paste As Values To New Sheet & Sort
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
Macro For Copy And Paste Based On Date
I have a spreadsheet with a number of sheets.
I need to extract a number of cells, based on the date of another cell and then past these values into a column on anther sheet.
Example: Sheet "Name1" in Column "G" is where I want the values to be pasted.
Sheet "Name2" has the dates in Column "B". I wish to extract the entries in Column "K" into Column "G" on Sheet "Name 1". I also have another Sheet, "Name 3" which has the the date field in column "B" and the entries I wish to extract in Column "K"and pasted in column "G" on the "Name 1"sheet.
The date range I'll be looking to past is by Month and year. The date fomat is dd/mm/yyyy.
Macro To Copy And Paste The Correct Amount Of Rows
I want to create a macro that will copy and paste a couple seperate collumns but the problem is that each month, and each invoice, contain a different amount of rows so I can't "record" a macro. Lets say I start on A4 which is the heading of Column D..below it are a bunch of records at the end of the records is a space. I need it to stop there. Then do the same for Column G, I, etc. I would like it to copy each column and paste in a new workbook.
Copy And Paste Macro - Variable Number Of Rows
I am working on a macro where I am creating a formula to string together some text columns and then copy the formula down the entire column. The data source I will be performing this on will change in number of rows period to period. The data would be in columns A,B & C and the formula is in D. The formula in D is stringing together the data in AB & C and then I want to copy and paste that formula down to the bottom of all of the data. What would the code be for the copy and paste with variable rows?
Macro Copy/Paste As Per Number Of Rows In ColA
I am looking for is a basic macro that will copy and paste cells down as per number of entries or rows in a particular column
As an example, lets say my static data runs in Column A, from A1 : A10.
Cells B1 through to E1 each contain a seperate formula
How would I get the range B1:E1 to be copied and pasted a number of times that corresponds to the last entry in column A (in this case A10) ?
ie VBA code that recognises that the entries end at A10 and that the range B"#":E"#" must be copied and pasted down until the last entry in Column A
Formulas Based On Drop Down List Item
in it, there's a Sheet named:
which has a drop down list for all possible reports
beginning with "Jan".
There's also a "Totals" sheet which has the corresponding
information for each report totaled in separate columns.
Jan, for instance is totaled in column B.
Feb, is totaled in column C.
And so on.
What I'd like to be able to do, is, depending on
the report selected, to have the information in
the corresponding cells in the "CSBG Reports" Sheet
pulled from the appropriate column in the "Totals" Sheet.
So far, I'm not wrapping my mind around a way to
Macro-Copy&Paste Fixed Data Ranges Into Last Empty Cell Of Specific Column
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Copy/paste Formulas Only
I have setup a forecast model and now find it necessary to update many formulas
I have set period 1 formulas correctly and would like to copy through periods 2-12. However each period has already been populated with data that need to remain intact in this process
I have formulas to copy at I5 and I9. I6,7,8 should be skipped
These formulas should be pasted to K5 and K9 respectively, while leaving K6,7,8 intact
This is of course a simple example, the column contains 15 formulas to be copy/paste
Hide Specific Rows When Certain Value Chosen From Cell Drop-Down
Basicly I used conditional formatting and lots of "IF".My solution lacks in style and it's time consuming ..
Long story short: I need to modify the way some cells are displayed based on the selection in a specific dropdown list.
I need that whenI select Task3 from the dropdown list next to "step1: please select" , everything from row 15 to row21 (both 15 & 21 rows included) and from row 23 on, to disappear.
Hiding Specific Columns Based On Drop Down Menu Value
I have this model I created where I have two tabs. One tab is an input tab using validation and drop down menus and the other is a display tab. I simply want to hide certain QTRs based on the value of one of the drop down menu results. I tried writing the VBA code below but am a novice when it comes to code. Can somebody please help me fix the below code so that it works properly.
Public Sub hide()
If Worksheets("input").Range("b14") = "Q1" Then
Worksheets("Group P&L").Columns(c, d, e, h, i, j, m, n, o, r, s, t, w, x, y).Hidden = True
ElseIf Worksheets("input").Range("b14") = "Q2" Then
Worksheets("Group P&L").Columns(c, d, h, i, m, n, r, s, w, x).Hidden = True
ElseIf Worksheets("input").Range("b14") = "Q3" Then
Worksheets("Group P&L").Columns(c, h, m, r, w).Hidden = True
ElseIf Worksheets("input").Range("b14") = "Q4" Then
Worksheets("Group P&L").Columns.Hidden = False
Losing Formulas In Copy & Paste
This is probably a simple one but I can't figure it out. I am building a workbook from scratch. It has about twelve of thirteen tabs at the bottom. On one of the tabs I would like to copy and paste a stand alone worksheet. The worksheet functions properly when it is stand alone. However when I copy and paste the worksheet into this new workbook none of the formulas transfer with it. I do get the cells filled in, but I would like to get the formulas.
I have done this before and it worked fine. In fact I can open a new workbook and copy / paste the worksheet into it and everything works fine. Again when I copy / paste it to this new workbook the formulas do not transfer.
Copy Range & Paste To Display Formulas
I'm working on a large set of data, so rather than read/writing lots of times to the sheet, I've followed the tip of reading a range to a variant array, processing the array, and then writing the whole thing back to the sheet (and it is indeed much much faster).
Dim vdata As Variant
vdata = Range("SummaryOutput")
'do a bunch of logic
Range("SummaryOutput") = vdata
To make things simpler (fewer ranges/variants to manage) I've defined a large range which includes non-data cells (blanks, labels, SUM formulas, etc..). The problem is when I read the range into variant array, it only copies the cells' values -- which means that once I write it back to the sheet, the formulas are lost.
So what I'm looking for is some way to read range into a variant whilst keeping the formulas (which I would see just being a string value in the variant array?). Does anyone know how this could be done?
Copy Named Range Chosen From Drop-Down & Paste To Last Row
I am a trainee dermatologist. We undertake allergy patch tests. There is a long list of different patch tests which are selected based on the patients history. I have put each of the types of patch testing on a master sheet. What I would like to be able to do is to have a control button next to each set, and when clicked would add that particular set to a "new patient" worksheet tab. And with every set having its own button, more than one set could be added to a new sheet. In the new patient worksheet id like the sets added with a single row gap between them.
I had tried, and managed to get a single series to work, but then it wouldnt allow me to add the next set, saying that sheet already exists. Ideally finally, id like there to be some way, or message to make sure after printing the new patient worksheet gets deleted.
I hope that all makes sense ! Even if I had a code for a single button that added to a master sheet at the next available row +1 I think I could manipulate the code to suit.
Select File, Specific Tab, Then Copy/paste
Feedback.xls is the file I want to have my macro run in. By pushing a button to run the macro, it will prompt the user to select where their file is on their computer. This file will have different file names based on the end user. For example sake, I've included CAP.xls.
After the user selects their file, it will prompt them to choose which tab to copy and paste data from. Typically, there will be 30+ tabs on their worksheet. For example sake, I've created 5 tabs on CAP.xls. The tabs in their workbook will be labeled as I have labeled mine, M1 CAP, M2 CAP & M3 CAP. Therefore, it should prompt the user to select which tab to choose from.
After the user selects their tab (M1 CAP, M2 CAP, M3 CAP), the macro should prompt the user to choose which row of information to copy. In CAP.xls, I have a few rows of information to choose from. They all start with FY10A1, FY10A2, FY10A3, but this information could change. Once they select the row, it will copy each of those fields onto the respectively labeled fields on Feedback.xls.
Copy & Paste Specific Text From Cell
I have a cell that contains various data but in the cell there will be a string of characters that will begin with either ON or TN followed by numbers. What I would like to do is have the sheet look at that cell and if there's a TN12345 (or any combination of numbers) or an ON123456 (same idea as the TN) I would like the sheet to pull just the ON or TN number out and paste it in a specific cell. The ON would have it's own cell to be placed in as would the TN.
Here's an example. C5 contains various data, a mix of text and numbers but it will have either an ON or a TN or both. I would like the sheet to automatically pull the TN number out and place it in A5 and the ON in B5. I would like this process to repeat all the way through the sheet to the max amount of rows since I have no way of knowing how many rows I'll need. Can this be done with a simple IF formula or does it have to be done in VBA or is it not possible at all.
Copy & Paste At A Specific Computer Time
I am attempting to copy a range from one worksheet and paste it to a new worksheet when the system clock hits a specific time. It needs to run continuously and identify that a previous colum has been filled and paste into the next open column. I am just getting my feet wet. I have some code to begin with but I am getting a 1004 error.
'Application. ScreenUpdating = False
'rTime = TimeValue("12:31:00")
'Application .OnTime rTime, "RunThisProcedure"
Too Much Data Per Cell, Search/copy/paste Specific Values?
From mySQL database, i am getting a ton of data that is all being inputted into a single excel cell. Within this cell, there are certain data points that i wish to obtain (Bank #, SSN #, Routing #). There are multiple difficulties in obtaining this information.
1. these cells contain the same fields, but different number of total characters (differing in names, addresses, etc.)
2. some of the data points (like SSN) are inputted incorrectly, so even though a SSN is only 9 digits/characters, I may have to output all 11 that the SQL database placed within the cell.
Can I get some help? I'm thinking of a search function/macro within excel, because all of the fields show up correctly.
something like (i know this doesn't work)
= or("cellA1" contains/finds/function SSN,return the 9 characters after "SSN ")
um...yeah. difficult to explain, i'm sorry!
edit: not sure what is wrong the file. I have attached a new one.
Find Specific Cell, Copy Row And Paste Into New Sheet
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
Copy & Paste Macro Won't Paste
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
Copy Rows And Paste Them In New Rows Every Other Row For The Rest Of The Document
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 A 3 a1
row7 B 1 a1
I'm trying to do is set up a VBA code that will take lines lines 2-4, copy the rows and then paste them in new rows every other row for the rest of the document, so that it appears as...
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 data data data
row7 data data data..............................
Copy Formats/formulas In New Rows
I have a spreadsheet with customised formats and formulas and the problem is that when add a new row I have to go through and manually copy all the data to the new row and as there are many columns in the spreadsheet this takes forever.
Is there anyway I could automatically copy all the formats/formulas when I insert a row?
PS: I do not want to copy any data into the cell only the formatting and formulas
Hide Rows Based On Drop-Down Selection
I have a shared worksheet that has many rows of data... but only certain rows are relevant to each specific users. I would like each user to be able to select their name from a drop-down list in order to have all rows that are not important to them be hidden. I can put the name of the user in column 'A' in each row they need to see, but how could I make all rows that do not contain their name in column 'A' hide? In other words, if 'Bill' is selected from a drop-down list, only rows that contain 'Bill' in column 'A' would be seen.
Copy Formulas From First Row To Multiple Rows With Some Changes
I have 100 excel file in a folder such as File1, File2, File3, File4 etc.There are some figures and reports on these files. format of all the excel files are same except values. And I have a master file.
On my Master file, I have n number of formulas in Row 10,which gets data from the above excel files.
eg. Master file Sheet1 Row 10,
I have formula like this from Column B
='[File1.xls]Sheet1'!$A$1 [File1.xls]Sheet1'!$D$1, ='[File 1.xls]Sheet1'!$A$1 [File 1.xls]Sheet1'!$M$1 etc.
In Row 11,
='[File2.xls]Sheet1'!$A$1 [File2.xls]Sheet1'!$D$1, ='[File2.xls]Sheet1'!$A$1 [File2.xls]Sheet1'!$M$1 etc.
If there are 1 or two files then I can type manually in each rows, But I have more than 100 files. So i need a macro which copies the formula from Row 10 to rest of the rows, If there are 100 files with different names in the folder, the formulas have to be copied to 100 rows in the master sheet.
if the file name changes on the formulas I will get the data correctly.
Macro: Paste Cell From Specific Files To 1 General File
i have about 80 files that all have the same structure. I also have a general excel file that I need to fill with values from each of the 80 files. I'd like to use a macro that can be applied to each of the 80 files at a time (or at the same time, if that's possible) so I can copy the cells (only the text, not the formula) I need from each individual file to the general sheet.
each file is:
I need to copy the "123" to a cell in the general sheet, "456" to a different cell in the general sheet and so on (to be able to choose which cell in the general sheet I am copying to).
Formula To Copy To Values To Specific Rows
Column A lists an account code on the summary line of each invoice. I'd like to copy this account code upwards for each individual line of the invoice so that I can summarise each type of charge by account code in a pivot table.
I'm a bit stumped as to how to do it. If possible I don't want to have to modify the data itself in any way so that I can paste new data in the each day without altering it.
I've started on the right with a CountA function for each row, which I was intending as a means to identifying the blanks rows and discount them, but it also showed up that each line requiring an account code to be copied returns a 4 and each invoice summary line returns a 9. I'm just not sure how to reflect this in a function.
Copy Rows Where No Blanks In Specific Column
I have the attached a workbook (& the code) which merges the worksheets from 7 different workbooks together into a 'Raw data' worksheet in my master workbook. It is driven off a parameters table which allows you to select which workbooks/worksheets you want to include in the merge. - The code works fine however when it is copying the data from each worksheets it is just copying all the data as a 'block' copy where I need it do do it row by row becuase I dont want to copy the row if colum C in each row contains no data, ie. it is blank.
So in my code I need another loop which will: Copy data from column A - E for each row if column C is not blank. Paste into Column B - F in Raw Data worksheet (as column A contains the source filename) Loop until it reaches no more data. I adeeally just want to copy the specific range as above, not the whole row but either will do. This is my code, refer to attachment too which includes master workbook and an data entry workbook where the data comes from.
Dim Book_Name As range ' List of available books
Dim Sheet_Name As range ' List of available sheets
Dim dLastRow As Long
Dim oLastRow As Long
Dim sLastRow As Long
Dim DestinationSheet As Worksheet
Dim SourceSheet As Worksheet
Dim WorkBookList As range
Dim WorkSheetList As range
Dim WorkbookPath As String
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
'set source and destination sheet
Set DestinationSheet = Sheets("Raw Data")
Set SourceSheet = Sheets("Parameters")........................
Hide Rows Based On Value In Specific Cell
Cell A1 can be left blank or have any value 1 to 99999 inserted by the user. Default value is null. My data starts on row 5 and currently goes to row 62, but will include more rows over time. I want to automatically hide rows 5 to 62 (and higher later on) where the value in Column C (C5, C6, C7, etc) is less than or equal to the value in A1 as long as A1 isn't null. If A1 is null, then no row hiding would be done. Ideally would be great to have msg also that says "No rows hidden" or "10 rows hidden", but not critical - just nice to have if you can provide such easily and quickly otherwise I'll just try to learn it later on.
Copy Rows And Paste Into Columns
I am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
Copy Paste Alternating Rows
In column H I have dates from 1/1/2008 to 12/31/2013. What I would like to do is transfer that data to column J, but alternate it every other row and then insert the word Date into the blank cells. For instance J1 would read "Date" and then J2 would read 1/1/2008 J3 would be Date and J4 would be 1/2/2008. I have a large database and I tried to use array formulas and they slow it down to a crawl so I was working with DSUM, but I don't feel like wasting time with adding in Date manually.