I need a Excel VB Macro which copies specific ranges from all available Excel workbooks in a Folder and pastes the values in a target Excel workbook in different columns. In other words it would copy Cells F4-F15 from all excel files (say 20) in a folder and paste them in the target Excel file in 20 columns.
View 2 RepliesI want to search for some text in a file. If found, I want to copy that file into another folder. I'm using the code below to do half the job.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Documents and SettingscDesktop1"
.SearchSubFolders = True
.Filename = "*.htm"
.TextOrProperty = "Status Rekod"
.MatchAllWordForms = True
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For I = 1 To .FoundFiles.Count
'I want to use the FileCopy function here to copy the found files to
'C:Documents and SettingscDesktop est. How do I do this?
Next I
Else
MsgBox "There were no files found."
End If
End With
End Sub
vba to copy files (pdf / cad) from various source to destination folders. Column A will list the source of the PDF files, Column B with the file name, Column C with the destination folder. Column D with value Y or N with Y denoting Yes to Copy and No for No. I have like 30000 rows of data.
View 3 Replies View RelatedI want to copy data from column A1:D50 from all worksheets available in my folder regardless of any specific file name,
View 4 Replies View RelatedI have a folder "D:Documents and SettingsRakesh", which has many .xls files. Each file has a sheet called 'Cover Note'. I want to copy cells B2, C2, D4 and F3 from 'Cover Note' of each file.
These cells should be pasted in the current sheet - row 2 onwards. First cell of each row should have the source file name.
I have found out how to creat a new folder, and now what to copy specific files over to this file from a different Directory. Does anyone know how to do this?
&
How to place todays Date at the end of this New Folder?
CreateDirectory ("Y:CostWallyPast Daily RunsTest")
Like for it to Read 'Test 07-10-06'
I’m wondering if this is possible, if I have a folder with say 30 excel spreadsheets (.xls) all named differently (number of files will always change), can I easily write something in VBA to Open all the spreadsheets and copy each sheet over to an existing Excel spreadsheet? For example, have a ‘template’ spreadsheet where the VBA would exist, then have the first sheet, (Sheet1) of each 30 sheets be copied back over to the template.xls? Even better, could I rename each Sheet1 to the name of the file before copying it over? This would basically be the first step in my process of getting the spreadsheet made.
I found this code in a similar question, so how can I rename the Sheet to the opened file name, then copy that over to template.xls?
I would like to copy every file named "Current Day.csv" from every subfolder found in the folder c: est
Rename the file as the value in A1 (3 digit code) and B1 (date) and save the file into v: est (and the folder name the file orginally came from)
Is that possible? (looking at about 30 filesfolders so if need be I can define the folder names)
I am trying to copy the following files to a single folder; I have 200 excel files each in individual folders and each of these excel files is named like this; order_a1.xls, order_a2.xls up to 200. Each order_-.xls is in an individual folder. This is because each member of staff has a folder called orders with their own copy of order_a..xls IN IT. oNLY ONE FILE PER FOLDER. These folders are on a server called F.
View 4 Replies View RelatedI have a folder "D:Documents and SettingsRakesh", which has many .xls files. Each file has a sheet called 'Cover Note'. I want to copy cells B2, C2, D4 and F3 from 'Cover Note' of each file.
These cells should be pasted in the current sheet, one row for each file. First cell of each row should have the source file name.
It would be better if macro can prompt to select the directory where ther source files resides.
Essentially, the Engineering Dept has given me 550 AutoCad files I have dumped into a folder located in this path: C:/DrawingsDump
From these 550 DWG files I need to manually filter and separate 260 drawings that I actually need to use and move them to a folder located in this path: C:/DrawingsFiltered . This manual filtering process takes a lot of time and is tedious work and it has got to be done everytime Engineering changes drawings because they are not kind enough to provide me a delta list.
In Excel 2003 I have setup a list of all 260 drawings I am interested in and that I call my filtered list. Is it possible to create a script that will enable Excel 2003 to compare my filtered list to all of the files inside C:/DrawingsDump, and then copy only those files that match to my Excel Filtered list and then paste only matching files into the C:/DrawingsFiltered folder?
If Excel 2003 can't handle this, is there a third party application that will let me perform a file management function like this with minimum startup time?
I have a macro that searches in all the excel files contained in a folder (weather files are opened or not) and returns the information (File name, Sheet name , Cell Address, and contents of the cell). I just want to amend the said code so that it copies not just the cell alone but" the entire row in which the cell is present".
My code is as follows
[Code] ......
For the last year I have been downloading cash register X1 and Z1 files onto an SD card. Each night's files (X1 & Z1) are stored in a new folder with the naming convention "RP + [DATE]", (EX: RP120910, [YYMMDD]). I have 265 folders! I need to go through each folder, select the Z1 file (I don't care about the X1, X2 or Z2 files) and rename each with the following naming convention: "Z1 + folder_name + .xls". For Example: Folder RP120910 contains the Z1 file named "Z1_T1729.ECR". After renaming, the file should be "Z1RP120910.xls". As the VBA code loops through each subfolder, selecting and renaming the Z1 files, I would like the new files to be placed into a new folder named "Z1Files". Note: All subfolders are currently in a directory named "RegisterFiles". I am using Excel 2010.
View 3 Replies View RelatedI have a number of files in a directory, with data in columns A:E, and variable rows deep (200-300) that I’d like to copy to the active workbook. I’d like to have a file window open to the same set directory (ie. “CArchives” and be able to select any file in that directory to copy.
Note:
There are 2 separate ranges to copy, which must be done separately because the headings are to be moved 2 columns over - also, there is data in beteen the headings and main data in the active workbook.
Range 1: Two headings cells in A1:B1 get transposed to C1:D1.
Range 2: the files’ data starts at A4 but gets inserted starting at cell A6 of the active workbook.
I need a macro which will copy an image from a folder location and paste it into a mail (outlook).
I don't want the image to be added as an attachment.
I would like to copy all data from all workbooks stored in one particular folder and paste them into a masterlist. The masterlist and all other workbooks in that folder have the same table header. How do I write VBA codes do the following tasks?
Options (1 and 2 are mutually exclusive):
1. VBA will go to that folder, open all workbooks one by one, if the data is filtered, then deactivate filtermode, and copy all the data but not the header, and paste it into masterlist and loop to the next workbook.
2. Create an inputbox in masterlist that allows user to key in Week Number. Then VBA will take the value, go to the folder and open all the workbooks one by one, apply filtering using the InputBox value, and copy the related data excluding the header into masterlist and loop to the next workbook. (*If the workbook in the folder is filtered, deactivate filter and then only filter using the InputBox value).
I am trying to write a basic VBA code to effectively remove the formulas from a workbook to reduce the size. I want to save the formulas in one hidden row above the data and have the macro select this row, copy the formulas down to the data, calculate the sheet, and then copy and paste the new calculated info and paste as values
Issues making this more difficult:
1) The number of rows of data is not constant, therefore I believe I need to make vba count the rows of data and therefore know how many rows to paste
2) The formulas are not in every column (E.g. A:C, E:R, AA:AD have formulas)
Here is a basic example:
A B C D E
1 FORMULAS (Hidden)
2
3 [Inv. Typ] [Material #] [Batch] [Qty] [$]
4 [FG] [545] [555A] [5000] [$250000]
5 [WIP] [984] [659A] [200] [$650000]
In this example I would like the macro to:
1) Copy the hidden formulas in (A1:B1, D1:E1)
2) Paste these formulas into the range (A4:B5, D4:E5) (*The height of this range is not constant)
3) Calculate the Worksheet
4) Copy and paste values to the range (A4:B5, D4:E5) (*The height of this range is not constant)
* I would like column C to be left alone.
I'm trying to copy range from one worksheet to another. I'm guessing there must be something wrong with my syntax here:
For Count = 2 To 50
If Sheets("sheet1").Range("H" & (Count)) < 0.1 Then
Sheets("sheet3").Range("A" & (next_place), "K" & (next_place)) = Sheets("sheet1").Range("A" & (Count), "K" & (Count))
next_place = next_place + 1
End If
Next Count
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
I am working on a macro, which asks the required field from multi select list box.
User can select required field, for example some user may be interested in
Region ID, Circle, BSC ID, Cell ID, Sector ID, City/Town.
Some user may be interested in Circle, BSC ID, Cell ID, Sector ID, City/Town.
Some user may be interested in BSC ID, Cell ID, Sector ID.
In sort, Selection on a multi select list box copy and paste that field from any folder.
That folder may have any location, and contains file which have.
Date
Vendor
Region ID
Circle
BSC ID
[Code] .....
I want to be able to prompt a user to select a sheet to import to another file. The ranges are as follows.
Sub Importtimesheet()...
I am using Excel 2007. I have a worksheet called January and I have a range of formatted cells in 'January' between B15:18 and BA15:18. Some contain formulas, others are just formated to size and or color. I want to copy and paste this range of cells (B15:18:BA15:18) to the next available unformatted or blank cell of the column of the same worksheet by pressing a button. I also need the newly pasted range to reset to their original formatting assuming data was entered before the button was pressed.
View 5 Replies View RelatedI have a workbook in which i do not want the end user to be able to drag and drop cells. I noticed that when I set this in the Excel options to disallow this, it is local to the machine. Is there a way I can prevent others from dragging and dropping cells, through vba or other means, without changing the users local machine settings? I also need to prevent CUT and pasting of cells. I also need to leave the cells un-protected, becuase COPY and paste is ok, as it doesnt affect the formulas that refer to the cell. The worksheet and workbook are both protected.
View 2 Replies View RelatedI am trying to Copy Cell from one sheet to another sheet starting on A7 and then going to V ? i have a formula that figures that out for me just need another formula or VBA to copy it to the new sheet. i will attach the a test of the file.
View 3 Replies View RelatedI use to have a macro that could copy formulas from non contiguous ranges and paste the values in the same cells. So for example, I could select a non contiguous range like B5:B10, E10:F12, and G1:G10. The macro would then copy and paste the values in those 3 ranges, so those 3 ranges would be values instead of formulas.
I think it worked by storing each range and then looping through each range to copy and paste special values.
Been playing with this for some time and can't quite figure it out. I'm trying to copy a named range and paste special value to another named range of the same size. I recorded a Macro that does what I need, and I'll use if necessary, but thought I'd try to consolidate the code a bit and can't get it to work. The recorded macro is as follows:
Sub PasteRanges()
Application.Goto Reference:="DataCopy30Yr"
Selection.Copy
Application.Goto Reference:="DataPaste30Yr"
ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _
IconFileName:=False
End Sub
My attempt to consolidate was this:
Sub PasteRanges()
Range("DataCopy30Yr").Copy Destination: Range("DataPaste30Yr").PasteSpecial (xlPasteValues)
End Sub
I get the Run-time error 1004 Copy method of Range class failed when I try to run this. Again, I can use the longer version with no problem, but in the interest of learning and since I have spent some time not being able to come up with the solution, I thought I'd ask the experts opinions before I gave up on it.
In my consolidating spreadsheet there are 6 columns that show the file path, the worksheet name, and cell range to copy. There can be an unlimited number of rows (each row represents another path). I would like the VBA to copy/paste values from each range specified in each row and copy them into the consolidating worksheet named "copied".
Each time the VBA copies/paste values from the cell range specified in each row it needs to copy below the previous copied and pasted information in the worksheet named copied.
In the worksheet with the file paths etc shown below (named "list"), I would like the VBA to show the Date and Time each piece was copied and pasted. For each path I would like to show in the last column if the copy and paste operation was successful ("yes" or "no"), this is more or less the error handeling....
I have one master excel file (masterexcel.xlsx) and 100 small excel files. The small excel files are saved as M30.xlsx, M31.xlsx, M32.xlsx, M33.xlsx, M34.xlsx....
I want to open the M30 file, copy a certain section and paste it into the master excel file, close the M30 file whilst saving the new information in a file called recording. Then open the next file which is M31, copy a certain section and paste it into the master excel file, close the M31 file and then open m32 and so on....
How do I create a loop for the files so it automatically opens the files in the order M30, M31, M32.......and performs the aforementioned actions.
I have attempted the following for m30 but i need to make it a loop for m31, m32, m33, m34, 35 and so on....
[Code] .....
Is there a way to copy then paste specific cells from closed .xls files in one directory ( more than 500 files ), and how, if all files are with one known password protection( my own files ).
View 9 Replies View Related1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace()
'
' Macro2 created by david
'
' for the entire sheet, moving from one cell to the next down the column, changing rows
' search for the contents in another sheet, and then if that is found,
' copy the row number to a variable, and then
' copy column K from sheet 1 to column N of sheet 2, using the same variable above
' after that same, but L goes to P.
'
'
Windows("file1.xls").Activate
Rng = Selection.Rows.Count
Dim toFind As String
ActiveCell.Offset(0, 0).Select
Application. ScreenUpdating = False
Dim i As Integer
For i = 1 To Rng
Windows("file1.xls").Activate
toFind = Range("A + i")
Windows("file2.xls").Activate